when trying to do
mdir z:
my current kernel immediately freezes!
here is dmesg (the ata devicee was attached to isa bus in the config
file, which is wrong but did not matter all the time):
The attached file "core" is the dmesg-output.
--
Fritz Heinrichmeyer mailto:[EMAIL PROTECTED]
FernUniversitaet Hagen, LG ES, 58084 Hagen (Germany)
tel:+49 2331/987-1166 fax:987-355 http://www-es.fernuni-hagen.de/~jfh
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Tue Feb 8 15:01:14 CET 2000
[EMAIL PROTECTED]:/tmp/compile/JFH00
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (265.26-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping = 3
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 268435456 (262144K bytes)
avail memory = 257130496 (251104K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc032e000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0 at 0x01f0 irq 14 on ata-pci0
vga-pci0: <Matrox MGA Millennium II 2164W graphics accelerator> mem
0xfe000000-0xfe7fffff,0xfebfc000-0xfebfffff,0xfc000000-0xfcffffff irq 16 at device
10.0 on pci0
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xef00-0xef3f irq 19 at device 11.0 on pci0
xl0: Ethernet address: 00:60:08:0b:b0:a5
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xec00-0xecff mem 0xfebfb000-0xfebfbfff
irq 16 at device 14.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
isa0: unexpected tag 14
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata-isa0: already registered as ata0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x278-0x27f irq 7 flags 0x40 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on
isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.16> on sbc0
joy0: <Generic PnP Joystick> at port 0x200-0x207 on isa0
unknown0: <WaveTable> at port 0x620-0x623 on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 2 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [32/64/96] at ata0-master using PIO0
Mounting root from ufs:/dev/da0s2a
cd1 at ahc0 bus 0 target 3 lun 0
cd1: <TEAC CD-ROM CD-516S 1.0G> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM OEM DCHS09U 5353> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8689MB (17796077 512 byte sectors: 255H 63S/T 1107C)
WARNING: / was not properly dismounted
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <YAMAHA CRW4260 1.0q> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
lpt0: switched to polled standard mode
