On Tue, Jan 25, 2000 at 09:40:11AM +0100, Anders Andersson wrote:
> I have the same problem:
>
> [anders@enterprise:anders] $ dmesg | grep ata
> ata-pci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1
> on pci0
> ata0 at 0x01f0 irq 14 on ata-pci0
> ata-isa0: already registered as ata0
> ata0-slave: ata_command: timeout waiting for intr
> ata0-slave: identify failed
>
>
> --
> Anders Andersson [EMAIL PROTECTED]
> Sanyusan International AB http://www.sanyusan.se/
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-current" in the body of the message
With current cvsupped an hour ago, I am seeing this. With current about
a month old things are perfect. (and have been for many months on ata
driver) Hardware is SMP (2*PIII-450) BX chipset motherboard, second bus
has IDE hard disk as primary and atapi CD as secondary.I have never
prior to this seen a failure to probe. The primary drive runs fine.
I get exactly the same error message on the recent kernel.
Normal (correct boot messages)
Jan 25 20:08:13 rose /kernel: Copyright (c) 1992-1999 The FreeBSD Project.
Jan 25 20:08:13 rose /kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 25 20:08:13 rose /kernel: The Regents of the University of California. All rights
reserved.
Jan 25 20:08:13 rose /kernel: FreeBSD 4.0-CURRENT #1: Tue Dec 28 17:21:58 CST 1999
Jan 25 20:08:13 rose /kernel: [EMAIL PROTECTED]:/usr/src/sys/compile/ROSE
Jan 25 20:08:13 rose /kernel: Timecounter "i8254" frequency 1193182 Hz
Jan 25 20:08:13 rose /kernel: CPU: Pentium III/Xeon (451.02-MHz 686-class CPU)
Jan 25 20:08:13 rose /kernel: Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Jan 25 20:08:13 rose /kernel:
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM>
Jan 25 20:08:13 rose /kernel: real memory = 268423168 (262132K bytes)
Jan 25 20:08:13 rose /kernel: avail memory = 256626688 (250612K bytes)
Jan 25 20:08:13 rose /kernel: Programming 24 pins in IOAPIC #0
Jan 25 20:08:13 rose /kernel: FreeBSD/SMP: Multiprocessor motherboard
Jan 25 20:08:13 rose /kernel: cpu0 (BSP): apic id: 1, version: 0x00040011, at
0xfee00000
Jan 25 20:08:13 rose /kernel: cpu1 (AP): apic id: 0, version: 0x00040011, at
0xfee00000
Jan 25 20:08:13 rose /kernel: io0 (APIC): apic id: 2, version: 0x00170011, at
0xfec00000
Jan 25 20:08:13 rose /kernel: Preloaded elf kernel "kernel" at 0xc03a0000.
Jan 25 20:08:13 rose /kernel: Pentium Pro MTRR support enabled
Jan 25 20:08:13 rose /kernel: md0: Malloc disk
Jan 25 20:08:13 rose /kernel: npx0: <math processor> on motherboard
Jan 25 20:08:13 rose /kernel: npx0: INT 16 interface
Jan 25 20:08:13 rose /kernel: pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on
motherboard
Jan 25 20:08:13 rose /kernel: pci0: <PCI bus> on pcib0
Jan 25 20:08:13 rose /kernel: pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at
device 1.0 on pci0
Jan 25 20:08:13 rose /kernel: pci1: <PCI bus> on pcib1
Jan 25 20:08:13 rose /kernel: vga-pci0: <Matrox model 051f graphics accelerator> irq
16 at device 0.0 on pci1
Jan 25 20:08:13 rose /kernel: isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0
on pci0
Jan 25 20:08:13 rose /kernel: isa0: <ISA bus> on isab0
Jan 25 20:08:13 rose /kernel: ata-pci0: <Intel PIIX4 ATA controller> at device 4.1 on
pci0
Jan 25 20:08:13 rose /kernel: ata-pci0: Busmastering DMA supported
Jan 25 20:08:13 rose /kernel: ata0 at 0x01f0 irq 14 on ata-pci0
Jan 25 20:08:13 rose /kernel: ata1 at 0x0170 irq 15 on ata-pci0
Jan 25 20:08:13 rose /kernel: pci0: Intel 82371AB/EB (PIIX4) USB controller
(vendor=0x8086, dev=0x7112) at 4.2
Jan 25 20:08:13 rose /kernel: Timecounter "PIIX" frequency 3579545 Hz
Jan 25 20:08:13 rose /kernel: intpm0: <Intel 82371AB Power management controller> at
device 4.3 on pci0
Jan 25 20:08:13 rose /kernel: intpm0: I/O mapped e800
Jan 25 20:08:13 rose /kernel: intpm0: intr IRQ 9 enabled revision 0
Jan 25 20:08:13 rose /kernel: smbus0: <System Management Bus> on intsmb0
Jan 25 20:08:13 rose /kernel: smb0: <SMBus general purpose I/O> on smbus0
Jan 25 20:08:13 rose /kernel: intpm0: PM I/O mapped e400
Jan 25 20:08:13 rose /kernel: bktr0: <BrookTree 848A> irq 19 at device 9.0 on pci0
Jan 25 20:08:13 rose /kernel: iicbb0: <I2C generic bit-banging driver> on bti2c0
Jan 25 20:08:13 rose /kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only
Jan 25 20:08:13 rose /kernel: smbus1: <System Management Bus> on bti2c0
Jan 25 20:08:13 rose /kernel: smb1: <SMBus general purpose I/O> on smbus1
Jan 25 20:08:13 rose /kernel: bktr0: Hauppauge Model 60104 C VM
Jan 25 20:08:13 rose /kernel: bktr0: Detected a MSP3400C-C6 at 0x80
Jan 25 20:08:13 rose /kernel: Hauppauge WinCast/TV, Philips PAL I tuner, msp3400c
stereo.
Jan 25 20:08:13 rose /kernel: fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 16
at device 10.0 on pci0
Jan 25 20:08:13 rose /kernel: fxp0: Ethernet address 00:90:27:3c:03:4d
Jan 25 20:08:13 rose /kernel: fxp0: supplying EUI64: 00:90:27:ff:fe:3c:03:4d
Jan 25 20:08:13 rose /kernel: vr0: <VIA VT3043 Rhine I 10/100BaseTX> irq 17 at device
11.0 on pci0
Jan 25 20:08:13 rose /kernel: vr0: Ethernet address: 00:80:c8:4b:98:ae
Jan 25 20:08:13 rose /kernel: miibus0: <MII bus> on vr0
Jan 25 20:08:13 rose /kernel: amphy0: <DM9101 10/100 media interface> on miibus0
Jan 25 20:08:13 rose /kernel: amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
Jan 25 20:08:13 rose /kernel: ahc0: <Adaptec 2940A Ultra SCSI adapter> irq 16 at
device 12.0 on pci0
Jan 25 20:08:13 rose /kernel: ahc0: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs
Jan 25 20:08:13 rose /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6
drq 2 on isa0
Jan 25 20:08:13 rose /kernel: fdc0: FIFO enabled, 8 bytes threshold
Jan 25 20:08:13 rose /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Jan 25 20:08:13 rose /kernel: atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f
on isa0
Jan 25 20:08:13 rose /kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Jan 25 20:08:13 rose /kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Jan 25 20:08:13 rose /kernel: psm0: model Generic PS/2 mouse, device ID 0
Jan 25 20:08:13 rose /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
Jan 25 20:08:13 rose /kernel: sc0: <System console> on isa0
Jan 25 20:08:13 rose /kernel: sc0: VGA <16 virtual consoles, flags=0x200>
Jan 25 20:08:13 rose /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Jan 25 20:08:13 rose /kernel: sio0: type 16550A
Jan 25 20:08:13 rose /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Jan 25 20:08:13 rose /kernel: sio1: type 16550A
Jan 25 20:08:13 rose /kernel: sio2: not probed (disabled)
Jan 25 20:08:13 rose /kernel: sio3: not probed (disabled)
Jan 25 20:08:13 rose /kernel: ppc0 at port 0x378-0x37f irq 7 on isa0
Jan 25 20:08:13 rose /kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
Jan 25 20:08:13 rose /kernel: ppb0: IEEE1284 device found /NIBBLE/ECP
Jan 25 20:08:13 rose /kernel: Probing for PnP devices on ppbus0:
Jan 25 20:08:13 rose /kernel: ppbus0: <HEWLETT-PACKARD OFFICEJET PRO 1170C SERIES>
PRINTER PCL,MLC,PML,PJL
Jan 25 20:08:13 rose /kernel: plip0: <PLIP network interface> on ppbus 0
Jan 25 20:08:13 rose /kernel: lpt0: <generic printer> on ppbus 0
Jan 25 20:08:13 rose /kernel: lpt0: Interrupt-driven port
Jan 25 20:08:13 rose /kernel: ppi0: <generic parallel i/o> on ppbus 0
Jan 25 20:08:13 rose /kernel: sbc0: <Creative SB16/SB32> at port
0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
Jan 25 20:08:13 rose /kernel: sbc0: setting card to irq 5, drq 1, 5
Jan 25 20:08:13 rose /kernel: pcm0: <SB DSP 4.13> on sbc0
Jan 25 20:08:13 rose /kernel: unknown0: <Generic ESDI/IDE/ATA controller> at port
0x168-0x16f,0x36e-0x36f irq 10 on isa0
Jan 25 20:08:13 rose /kernel: unknown1: <Reserved> at port 0x100 on isa0
Jan 25 20:08:13 rose /kernel: unknown2: <Game> at port 0x200-0x207 on isa0
Jan 25 20:08:13 rose /kernel: APIC_IO: Testing 8254 interrupt delivery
Jan 25 20:08:13 rose /kernel: APIC_IO: routing 8254 via pin 2
Jan 25 20:08:13 rose /kernel: IP packet filtering initialized, divert enabled,
rule-based forwarding enabled, unlimited logging
Jan 25 20:08:13 rose /kernel: SMP: AP CPU #1 Launched!
Jan 25 20:08:13 rose /kernel: ad0: <ST328040A/3.11> ATA-4 disk at ata0 as master
Jan 25 20:08:13 rose /kernel: ad0: 27199MB (55704096 sectors), 55262 cyls, 16 heads,
63 S/T, 512 B/S
Jan 25 20:08:13 rose /kernel: ad0: 16 secs/int, 1 depth queue, UDMA33
Jan 25 20:08:13 rose /kernel: ad2: <QUANTUM FIREBALL ST6.4A/A0F.0800> ATA-3 disk at
ata1 as master
Jan 25 20:08:13 rose /kernel: ad2: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63
S/T, 512 B/S
Jan 25 20:08:13 rose /kernel: ad2: 16 secs/int, 1 depth queue, UDMA33
Jan 25 20:08:13 rose /kernel: acd0: <MATSHITA CR-585/ZM50> CDROM drive at ata1 as
slave
Jan 25 20:08:13 rose /kernel: acd0: read 4125KB/s (4125KB/s), 128KB buffer, PIO
Jan 25 20:08:13 rose /kernel: acd0: Reads: CD-R, CD-RW, CD-DA stream
Jan 25 20:08:13 rose /kernel: acd0: Audio: play, 256 volume levels
Jan 25 20:08:13 rose /kernel: acd0: Mechanism: ejectable tray
Jan 25 20:08:13 rose /kernel: acd0: Medium: no/blank disc inside, unlocked
Jan 25 20:08:13 rose /kernel: Waiting 15 seconds for SCSI devices to settle
Jan 25 20:08:13 rose /kernel: Mounting root from ufs:/dev/ad0s1a
Jan 25 20:08:13 rose /kernel: cd0 at ahc0 bus 0 target 2 lun 0
Jan 25 20:08:13 rose /kernel: cd0: <MATSHITA CD-R CW-7502 4.16> Removable CD-ROM
SCSI-2 device
Jan 25 20:08:13 rose /kernel: cd0: 3.300MB/s transfers
Jan 25 20:08:13 rose /kernel: cd0: Attempt to query device size failed: NOT READY,
Medium not present - tray closed
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
