Brian Somers wrote:
> > Brian Somers wrote:
> > > Hi,
> > >
> > > Since the PnP probing code was made unconditional in the bootup
> > > routines on December 6, I've been having problems with my
> > > Adaptec 1542CP.
[..]
> Trying Read_Port at 203
> ADP1542: adding irq mask 0xdc00
> ADP1542: adding dma mask 0xe0
> ADP1542: start dependant
> ADP1542: adding io range 0x330-0x333, size=0x4, align=0x4
> ADP1542: start dependant
> ADP1542: adding io range 0x334-0x337, size=0x4, align=0x4
> ADP1542: start dependant
> ADP1542: adding io range 0x234-0x237, size=0x4, align=0x4
> ADP1542: start dependant
> ADP1542: adding io range 0x230-0x233, size=0x4, align=0x4
> ADP1542: start dependant
> ADP1542: adding io range 0x134-0x137, size=0x4, align=0x4
> ADP1542: start dependant
> ADP1542: adding io range 0x130-0x133, size=0x4, align=0x4
> ADP1542: end dependant
> ADP1542: adding memory range 0xc8000-0xdc03f, size=0x40, align=0x4000
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
[..]
> isa_probe_children: probing PnP devices
[..]
> aha0: status reg test failed ff
> unknown9: <SCSI Host Adapter> at port 0x330-0x333 irq 11 drq 5 on isa0
^^^^^^^^^^^^^^^^^^^^^
Warner, what does this mean? the status register is 0xff? Could that mean that
the 1542CP didn't get it's mapping at 0x330 activated?
Also:
> ADP1542: adding memory range 0xc8000-0xdc03f, size=0x40, align=0x4000
Could this be causing a failed allocation somewhere? (pr doesn't it matter
since the ROM isn't being activated?)
Cheers,
-Peter
--
Peter Wemm - [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED]
"All of this is for nothing if we don't go to the stars" - JMS/B5
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
