Hi,
I upgraded a few days ago from 3.4-STABLE to 4.0-CURRENT, and without
really any change in configuration, anything tcp/ip is much slower. Just a
standard "ping localhost" has gone from ~0.155ms to ~0.195ms. Averages for
"ping -f localhost" have gone from ~0.100ms to ~0.160ms. FTP over my lan
"vr0" has slipped from 7.7MB/s down to 4.8MB/s (!).
I've got hardly anything running on my machine (natd, samba, postfix,
pppd). 'top' shows 99-100% idle pretty much all the time. Load averages are
all 0.00. CPU usage goes upto 100% during the ftp transfer.
Here's the output of my dmesg:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Fri Jan 7 00:14:59 EST 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/DEATH
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (166.19-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30040064 (29336K bytes)
Preloaded elf kernel "kernel" at 0xc028b000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371FB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX ATA controller> at device 7.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
vr0: <VIA VT3043 Rhine I 10/100BaseTX> irq 9 at device 18.0 on pci0
vr0: Ethernet address: 00:80:c8:d8:19:b7
miibus0: <MII bus> on vr0
amphy0: <DM9101 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga-pci0: <Cirrus Logic GD5430 SVGA controller> irq 11 at device 19.0 on pci0
ata-isa0: already registered as ata0
ata-isa1: already registered as ata1
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, logging limited to 100 packets/entry by default
DUMMYNET initialized (990811)
IP Filter: initialized. Default = pass all, Logging = enabled
IP Filter: v3.3.3
ad0: <ST34321A/3.11> ATA-4 disk at ata0 as master
ad0: 4103MB (8404830 sectors), 8894 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, WDMA2
ad2: <Maxtor 71084 AP/QA3C1D20> ATA-0 disk at ata1 as master
ad2: 1036MB (2121840 sectors), 2105 cyls, 16 heads, 63 S/T, 512 B/S
ad2: 16 secs/int, 1 depth queue, WDMA2
Mounting root from ufs:/dev/wd0s1a
Here's my kernel config:
machine i386
cpu I586_CPU
ident DEATH
maxusers 64
options INET
options FFS
options FFS_ROOT
options MSDOSFS
options PROCFS
options COMPAT_43
options UCONSOLE
options USERCONFIG
options VISUAL_USERCONFIG
options SYSVSHM
options SYSVMSG
options SYSVSEM
controller isa0
controller pci0
controller ata0 at isa? port IO_WD1 irq 14
controller ata1 at isa? port IO_WD2 irq 15
device atadisk0
options ATA_STATIC_ID
options ATA_ENABLE_ATAPI_DMA
controller atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device vga0 at isa? port ? conflicts
device sc0 at isa?
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus? disable flags 0x20
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
controller miibus0
device vr0
pseudo-device loop
pseudo-device ether
pseudo-device ppp 2
pseudo-device tun 1
pseudo-device pty 16
pseudo-device md
pseudo-device bpf 4
pseudo-device snp 4
options MD5
options PPP_BSDCOMP
options PPP_DEFLATE
options PPP_FILTER
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_FORWARD
options IPFIREWALL_VERBOSE_LIMIT=100
options IPFIREWALL_DEFAULT_TO_ACCEPT
options IPDIVERT
options IPFILTER
options IPFILTER_LOG
options IPSTEALTH
options TCP_DROP_SYNFIN
options TCP_RESTRICT_RST
options ICMP_BANDLIM
options DUMMYNET
options SOFTUPDATES
options NSWAPDEV=2
options QUOTA
pseudo-device gzip
Here's the first 4 relevant ipfw rules:
00050 allow icmp from any to any
00100 divert 8668 ip from 192.168.1.2 to any out xmit ppp0
00100 divert 8668 ip from any to any in recv ppp0
00200 allow tcp from any to any established
I used the same config for 3.4. The only difference is in using ata instead
of wd for my hard drives. And the new miibus controller for my ethernet card.
I would've thought that 4.0 would be faster. Is it supposed to be? Does
anybody know of any major difference in 4.0 that would give me these speed
decreases? And possibly how to fix them?
Your help is much appreciated.
Cheers
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
