By 66mhz, thats what Intel rates them at...I'm runnin my 366 at 75mhz
(412.5mhz)...but they're only designed for 66mhz. Plus, you cant OC the
Socket370 chips the same as with the older 300/300a and most of the Slot1
chips. The Socket370 CPUs dont have clock multiplier options, only bus
speed options.
But as for Micro-ATX, Shuttle makes several Socket370 440BX boards in
Micro-ATX, and FIC sells a LX based Micro-ATX board (never used a FIC board
w/ a Pentium, however, only AMD). But, I'm willing to guess most board
manufacturers sell MicroATX boards for the Socket370...and if not, and you
really like the board, and it's a P2/P3 board, you can always get a
Socket370 to Slot1 converter card ("slocket")
Douglas Kuntz
Editor
PC Tech Reports
http://www.pctechreports.com
----- Original Message -----
From: "Sean Jensen-Grey" <[EMAIL PROTECTED]>
To: "Douglas Kuntz" <[EMAIL PROTECTED]>
Cc: "Garrett Wollman" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Monday, December 06, 1999 7:46 PM
Subject: Re: Intel 810?
> whoa. Celerons are whatever bus speed you set them to (not 66). I see no
reason
> to buy a PIII when I can very reliably over clock a celeron processor. I
have 5
> Celeron SMP machines all running FreeBSD. They are celeron 300a OCd to 450
> running on the Abit BP6 MB. Never a problem. I even have a pair of 366 Mhz
chips
> overclocked to 550. My 4.0 Current machine is a dual celeron 450.
>
> please reference
>
> http://www.sharkyextreme.com
>
> http://www.arstechnica.com
>
> for info on overclocking. Abit boards are the defacto standard for over
> clocking.
>
> Sean.
>
> On Mon, 6 Dec 1999, Douglas Kuntz wrote:
>
> > As others have stated, Socket370 boards arent all 810/810c...my
4.0-Current
> > machine was, until last week, a Celeron 366 Socket370 on a Shuttle 440LX
> > board. Though, as far as I can tell, if you're going to use a Celeron
PPGA
> > chip, save money and go with the LX or Via chipset based boards, and use
the
> > saved money on ram or a larger harddrive. Celerons are all 66mhz bus
> > speed...though, Intel has said they plan on releasing Socket370 Pentium
IIIs
> > in 2000.
> >
> > Though, on a sidenote, I really see no reason on getting a 100mhz
Socket370
> > board to run a Pentium III on later, when, except for the clock speed
> > increase, a P3 is the same as a P2 with just the addition of SIMD
> > extensions, which I dont think FreeBSD uses yet.
> >
> > Douglas Kuntz
> > Editor
> > PC Tech Reports
> > http://www.pctechreports.com
> >
> > ----- Original Message -----
> > From: "Garrett Wollman" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> > Sent: Monday, December 06, 1999 2:23 PM
> > Subject: Intel 810?
> >
> >
> > > I recently got a quote from a hardware vendor which made the following
> > > claim:
> > >
> > > > All Socket 370PGA Motherboards use either the 810 or [the] 810c chip
> > > > set which does not support FreeBSD because 16MB of the motherboard
> > > > memory is used for the display controller. There is no way to tell
> > > > the FreeBSD kernel not to use this memory so it will corrupt data.
> > >
> > > I find this statement rather dubious. Can anyone out there say with
> > > more certainty?
> > >
> > > -GAWollman
> > >
> > >
> > >
> > > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > > with "unsubscribe freebsd-current" in the body of the message
> >
> >
> >
> > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > with "unsubscribe freebsd-current" in the body of the message
> >
>
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
