I just upgraded a server from 2.2.8 to -current (991201 kernel) and am
seeing some NFS corruption. It looks like byte ranges are getting
zeroed out by the client (or not getting written at all, and the server
at the other end is filling with zeros?). I've seen it while writing
to both a Solaris 2.6 server (NFSv3) and a Netware NFS server (NFSv2),
so I'm pretty sure it's the client causing the problem.
Details:
4.0-CURRENT FreeBSD 4.0-CURRENT #2: Thu Dec 2 17:07:57 CST 1999
CPU: Dual Pentium III/Xeon 600 Mhz
RAM: 256MB
NIC: fxp0, full-duplex 100mbit
NFS mount point: /mnt/filesystem/u01, mounting a Solaris 2.6 box also
with a 100mbit full-duplex net connection, 8K NFS blocksize,
UDP, via amd.
My testcase is a 7-gig text file that I'm copying around with the
following commands:
$ cd /net/remotesystem/u01
$ split -b 1000000000 /u01/bigfile.txt file
creating seven 1-gig files fileaa .. fileag (running at a nice rate of
5-6 MB/sec :). I then run "blankcheck" (attached) to scan the file for
runs of zeroes, and get the following:
$ for i in filea{a,b,c,d,e,f} ; do echo $i ; ./blankcheck < $i ; done
fileaa
fileab
168173568-168179199(5632)
384966656-384972287(5632)
385753088-385758719(5632)
( snip 156 lines just like the above, all ranges 5632 bytes in size )
464068608-464074239(5632)
464723968-464729599(5632)
465248256-465253887(5632)
fileac
203448320-203451391(3072)
filead
fileae
372097024-372103167(6144)
fileaf
561774592-561778175(3584)
$
All the zeroed out blocks start on an 8k NFS boundary, and I have
verified that the rest of the 8k block has the correct data in it.
Each corrupted block is always a multiple of 512 bytes long (so far
multiples are 6, 7, 11, and 12).
On this example run, each file either has no corruption at all, or has
corruption with all the zeroed out ranges the same size. Dunno if this
matters, but it's interesting.
If I run without nfsiod, or copy from a remote NFS mount to a remote
NFS mount, the corruption goes way down but still happens. I got only
one corrupted block in my 7-gig test run in each of those test cases.
I'm afraid I don't know much about the internal workings of NFS, so I'm
hoping my description is enough to pinpoint the problem.
--
Dan Nelson
[EMAIL PROTECTED]
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #2: Thu Dec 2 17:07:57 CST 1999
[EMAIL PROTECTED]:/usr/src/sys/compile/EMSSRV7
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Xeon (596.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 268427264 (262136K bytes)
avail memory = 257163264 (251136K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0303000.
VESA: v2.0, 2048k memory, flags:0x0, mode table:0xc02af1c2 (1000022)
VESA: ATI MACH64
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <ATI model 4757 graphics accelerator> at device 0.0 on pci1
pcib2: <PCI to PCI bridge (vendor=1011 device=0024)> at device 2.0 on pci0
pci2: <PCI bus> on pcib2
ahc0: <Adaptec 2944 Ultra SCSI adapter> irq 21 at device 9.0 on pci2
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7890/91 Ultra2 SCSI adapter> irq 16 at device 11.0 on pci2
ahc1: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
chip1: <Intel PIIX4 IDE controller> at device 7.1 on pci0
pci0: UHCI USB controller (vendor=0x8086, dev=0x7112) at 7.2 irq 19
Timecounter "PIIX" frequency 3579545 Hz
intpm0: <Intel 82371AB Power management controller> at device 7.3 on pci0
intpm0: I/O mapped 850
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 800
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 18 at device 14.0 on pci0
fxp0: Ethernet address 00:90:27:dc:44:eb
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
wdc1 at port 0x170-0x177 irq 15 on isa0
wdc1: unit 0 (atapi): <SAMSUNG SC-140B/ d005>, removable, intr, dma, iordis
wcd0: drive speed 6875KB/sec, 128KB cache
wcd0: supported read types: CD-R, CD-RW, CD-DA, packet track
wcd0: Audio: play, 255 volume levels
wcd0: Mechanism: ejectable tray
wcd0: Medium: no/blank disc inside, unlocked
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
Waiting 3 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Mounting root from ufda0 at ahc0 bus 0 target 0 lun 0
da0: <StorComp RAID-7 7.02> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 51200MB (104857600 512 byte sectors: 255H 63S/T 6527C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <StorComp RAID-7 7.02> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 44032MB (90177536 512 byte sectors: 255H 63S/T 5613C)
s:/dev/da2s2a
da2 at ahc1 bus 0 target 0 lun 0
da2: <IBM DNES-309170W SA60> Fixed Direct Access SCSI-3 device
da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da2: 8683MB (17783301 512 byte sectors: 255H 63S/T 1106C)
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.freebsd.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.199 1999/11/01 04:02:56 peter Exp $
machine i386
#cpu I386_CPU
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident GENERIC
maxusers 100
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
makeoptions COPTFLAGS="-O -pipe" # use some optimizations
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MFS_ROOT #MFS usable as root device, "MFS" req'ed
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=3000 #Be optimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) syscall trace support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options SOFTUPDATES
# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
controller isa0
controller pnp0 # PnP support for ISA
controller eisa0
controller pci0
# Floppy drives
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
options IDE_DELAY=3000 # Be optimistic about Joe IDE device
# IDE controller and disks
controller wdc0 at isa? port IO_WD1 irq 14
device wd0 at wdc0 drive 0
device wd1 at wdc0 drive 1
controller wdc1 at isa? port IO_WD2 irq 15
device wd2 at wdc1 drive 0
device wd3 at wdc1 drive 1
# ATAPI devices on wdc?
device wcd0 #IDE CD-ROM
device wfd0 #IDE Floppy (e.g. LS-120)
device wst0 #IDE Tape (e.g. Travan)
# SCSI Controllers
# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
controller ahc0 # AHA2940 and onboard AIC7xxx devices
#controller adv0 at isa? port ? irq ?
#controller adw0
#controller bt0 at isa? port ? irq ?
#controller aha0 at isa? port ? irq ?
# SCSI peripherals
# Only one of each of these is needed, they are dynamically allocated.
controller scbus0 # SCSI bus (required)
device da0 # Direct Access (disks)
device sa0 # Sequential Access (tape etc)
device cd0 # CD
device pass0 # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa? port ? conflicts
options VGA_WIDTH90 # support 90 column modes
options VESA
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x31 # Advanced Power Management
# PCCARD (PCMCIA) support
#controller card0
#device pcic0 at isa?
#device pcic1 at isa?
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? port? flags 0x40 irq 7
controller ppbus0 # Parallel port bus (required)
device lpt0 # Printer
device plip0 # TCP/IP over parallel
device ppi0 # Parallel port interface device
#controller vpo0 # Requires scbus and da0
# PCI Ethernet NICs.
device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device gzip # Exec gzipped a.out's
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
#controller uhci0 # UHCI PCI->USB interface
#controller ohci0 # OHCI PCI->USB interface
#controller usb0 # USB Bus (required)
#device ugen0 # Generic
#device uhid0 # "Human Interface Devices"
#device ukbd0 # Keyboard
#device ulpt0 # Printer
#controller umass0 # Disks/Mass storage - Requires scbus and da0
#device ums0 # Mouse
# System Management Bus support provided by the 'smbus' device.
controller smbus0
controller intpm0
controller alpm0
device smb0 at smbus?
options MSGBUF_SIZE=32768
options INCLUDE_CONFIG_FILE # Include this file in kernel
#include <stdio.h>
#define BS (65536)
/* print the byte ranges and sizes of any runs of zeros in a datafile more
than 5 bytes long */
int main (void)
{
char buf[BS];
long long offset = 0;
long long first = -1;
int size;
int bufoff = 0;
setvbuf (stdin, NULL, _IOFBF, BS);
while ((size = fread (buf, 1, BS, stdin)))
{
for (bufoff = 0; bufoff < size; bufoff++, offset++)
{
if (buf[bufoff] == 0)
{
if (first == -1) first = offset;
} else
{
if (first != -1)
{
if (offset - first > 5)
printf ("%lld-%lld(%lld) \n", first,
offset - 1, offset - first);
first = -1;
}
}
}
}
if (first != -1)
{
if (offset - first + 1 > 5)
printf ("%lld-%lld(%lld) \n", first, offset, offset - first +
1);
first = -1;
}
return 0;
}
