On Tue, 30 Nov 1999, Matthew N. Dodd wrote:
> On Mon, 29 Nov 1999, Eric Ogren wrote:
>
> > Already there.... (I can attach my entire config file / dmesg output
> > to anyone who wants to see it, but I didn't want to dump the whole
> > thing to the list).
>
> How about the output of 'pnpinfo'?
>
> Apply this patch: ftp://ftp.jurai.net/users/winter/patches/if_ep.patch
Well, after applying the patch, I don't see anything about a PnP card
detected- in fact, dmesg | grep -i ep now shows nothing.
Pnpinfo seems to indicate that it's not seeing the card either. Maybe I
just configured it wrong? [will play around in the dos cfg program and
see what I can find]
Eric
[pnpinfo result below]:
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID ADS7181 (0x81719304), Serial Number 0xffffffff
PnP Version 1.0, Vendor Version 32
Device Description: Analog Devices AD1816A
Logical Device ID: ADS7180 0x80719304 #0
Device supports I/O Range Check
TAG Start DF
Good Configuration
IRQ: 5 7 - only one type (true/edge)
DMA: channel(s) 1
8-bit, not a bus master, count by byte, , Type F
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x500 .. 0x560, alignment 0x10, len 0x10
[16-bit addr]
TAG Start DF
IRQ: 5 7 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x500 .. 0x560, alignment 0x10, len 0x10
[16-bit addr]
TAG Start DF
IRQ: 5 7 9 10 11 15 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
I/O Range 0x220 .. 0x2e0, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x388 .. 0x3b8, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x500 .. 0x560, alignment 0x10, len 0x10
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 5 7 9 10 11 15 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
DMA: channel(s)
8-bit, not a bus master, count by byte, , Type F
I/O Range 0x220 .. 0x2e0, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x388 .. 0x3b8, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x500 .. 0x560, alignment 0x10, len 0x10
[16-bit addr]
TAG End DF
Logical Device ID: ADS7181 0x81719304 #1
Device supports I/O Range Check
Compatible Device ID: PNPb006 (06b0d041)
TAG Start DF
Good Configuration
IRQ: 5 7 9 11 - only one type (true/edge)
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
TAG Start DF
IRQ: 5 7 9 10 11 15 - only one type (true/edge)
I/O Range 0x300 .. 0x420, alignment 0x30, len 0x2
[16-bit addr]
TAG End DF
Logical Device ID: ADS7182 0x82719304 #2
Device supports I/O Range Check
Compatible Device ID: PNPb02f (2fb0d041)
TAG Start DF
Good Configuration
I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8
[16-bit addr]
TAG Start DF
I/O Range 0x200 .. 0x208, alignment 0x8, len 0x8
[16-bit addr]
TAG End DF
End Tag
Successfully got 48 resources, 3 logical fdevs
-- card select # 0x0001
CSN ADS7181 (0x81719304), Serial Number 0xffffffff
Logical device #0
IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220
IRQ 5 0
DMA 1 0
IO range check 0x00 activate 0x01
Logical device #1
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 7 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #2
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
