During make of kernel:
cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes
-Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual
-fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../include
-DKERNEL -include opt_global.h -elf ../../i4b/layer1/i4b_isic_pnp.c
../../i4b/layer1/i4b_isic_pnp.c:53: warning: #warning "Fix i4b pnp!"
Is this a "simple" matter of the right options to config, or does it
involve changes to the code?
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #130: Sat Nov 6 18:14:11 CET 1999
[EMAIL PROTECTED]:/usr/src/sys/compile/GINA
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (337.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 67096576 (65524K bytes)
avail memory = 61603840 (60160K bytes)
Preloaded elf kernel "kernel" at 0xc0357000.
VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc00c0e38 (c0000e38)
VESA: S3 Incorporated Trio3D.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <S3 model 8904 graphics accelerator> at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 IDE controller> at device 4.1 on pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: vendor 0x0553 product 0x0002, rev 1.00/1.00, addr 2
intpm0: <Intel 82371AB Power management controller> at device 4.3 on pci0
intpm0: I/O mapped e800
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped e400
pcm0: <AudioPCI ES1370> irq 5 at device 11.0 on pci0
ed1: <NE2000 PCI Ethernet (RealTek 8029)> irq 10 at device 12.0 on pci0
ed1: address 00:80:ad:50:40:cf, type NE2000 (16 bit)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0 at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
pca0 at port 0x40 on isa0
pca0: PC speaker audio driver
unknown0: <ISDN PnP ISA pass. Adaptor DNT2039> at port 0x200-0x201,0x202-0x203 irq 11
on isa0
i4b: ISDN call control device attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4bctl: ISDN system control port attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4btel: 2 ISDN telephony interface device(s) attached
i4brbch: 4 raw B channel access device(s) attached
i4btrc: 2 ISDN trace device(s) attached
ad0: <ST38641A/3.11> ATA-4 disk at ata0 as master
ad0: 8207MB (16809660 sectors), 16676 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 0 depth queue, UDMA33
Creating DISK ad0
Creating DISK wd0
ad1: <IBM-DTTA-350640/T54OA73A> ATA-4 disk at ata0 as slave
ad1: 6197MB (12692295 sectors), 13431 cyls, 15 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 31 depth queue, UDMA33
Creating DISK ad1
Creating DISK wd1
Mounting root from ufs:/dev/wd1s3a
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
