Thanks for your suggestion. I haven't found anything in the archives that seems
to apply. Any help from "current"?
---------- Forwarded Message ----------
Subject: RE: /dev/smb0 on Dell Latitude
Date: Wed, 13 Oct 1999 17:53:06 -0500
From: "Alejandro Ramirez" <[EMAIL PROTECTED]>
Hi,
You should write this question to [EMAIL PROTECTED], there was
some discusion about this.
Ales
----- Original Message -----
From: Richard Wackerbarth <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, October 13, 1999 5:09 PM
Subject: /dev/smb0 on Dell Latitude
> Help! Does anyone have any experience with the smbus on Dell laptops?
> This is today's kernel.
>
> Selected entries in dmesg are below.
>
> When I attempt to find devices the ioctl returns "Device not configured"
on
> /dev/smb0.
>
>
> FreeBSD 4.0-CURRENT #9: Wed Oct 13 08:21:53 CDT 1999
>
> CPU: Pentium II/Xeon/Celeron (267.27-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x650 Stepping = 0
>
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
> real memory = 67043328 (65472K bytes)
>
> apm0: <APM BIOS> on motherboard
> apm: found APM BIOS v1.2, connected at v1.2
> pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
> pci0: <PCI bus> on pcib0
> vga-pci0: <NeoMagic NM2160 laptop SVGA controller> irq 11 at device 2.0 on
pci0
> pcic0: <TI PCI-1131 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
> pcic1: <TI PCI-1131 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
> isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 7.1 on pci0
> chip1: <UHCI USB controller> irq 11 at device 7.2 on pci0
> intpm0: <Intel 82371AB Power management controller> at device 7.3 on pci0
> intpm0: I/O mapped 840
> intpm0: intr IRQ 9 enabled revision 0
> smbus0: <System Management Bus> on intsmb0
> smb0: <SMBus general purpose I/O> on smbus0
> intpm0: PM I/O mapped 800
> pcm0: <SoundBlaster Pro 3.2> at drq 1 flags 0x15 on isa0
> device_probe_and_attach: pcm0 attach returned 6
> devclass_alloc_unit: pcf0 already exists, using next available unit number
> pcf0 at port 0x320 irq 5 on isa0
> pcic: pccard bridge VLSI 82C146 (5 mem & 2 I/O windows)
>
> WARNING: driver smb should register devices with make_dev() (dev_t =
"#smb/0")
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-questions" in the body of the message
-------------------------------------------------------
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
