Since the new sound code has been committed, my cheapo Opti931
sound card hasn't been working.  Hopefully with the dmesg and
pnpinfo output which is attached, somebody can add the proper
vendor IDs.  Much appreciated.

Neal

Checking for Plug-n-Play devices...

Card assigned CSN #1
Vendor ID OPT0931 (0x3109143e), Serial Number 0xffffffff
PnP Version 1.0, Vendor Version 0
Device Description: OPTi Audio 16

Logical Device ID: OPTffff 0xffff143e #0
        Vendor register funcs 00
Device Description: AUX0

Logical Device ID: OPT9310 0x1093143e #1
        Vendor register funcs 00
Device Description: OPTi Audio 16
TAG Start DF
    I/O Range 0x534 .. 0x608, alignment 0x4, len 0x4
        [16-bit addr]
    I/O Range 0x380 .. 0x3f0, alignment 0x10, len 0xc
        [16-bit addr]
    I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10
        [16-bit addr]
    I/O Range 0xe0c .. 0xffc, alignment 0x4, len 0x4
        [16-bit addr]
    IRQ: 5 7 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
        8-bit, not a bus master, count by byte, , Type F
    DMA: channel(s) 0 1 3 5 6 
        8/16-bit, not a bus master, count by byte, count by word, Type F
TAG Start DF
    I/O Range 0x534 .. 0xff0, alignment 0x4, len 0x4
        [16-bit addr]
    I/O Range 0x380 .. 0x3f0, alignment 0x10, len 0xc
        [16-bit addr]
    I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10
        [16-bit addr]
    I/O Range 0xe0c .. 0xffc, alignment 0x4, len 0x4
        [16-bit addr]
    IRQ: 5 7 9 10 11  - only one type (true/edge)
    DMA: channel(s) 0 1 3 5 6 
        8/16-bit, not a bus master, count by byte, count by word, Type F
    DMA: channel(s) 0 1 3 5 6 
        8/16-bit, not a bus master, count by byte, count by word, Type F
TAG Start DF
    I/O Range 0x534 .. 0x608, alignment 0x4, len 0x4
        [16-bit addr]
    I/O Range 0x380 .. 0x3f0, alignment 0x10, len 0xc
        [16-bit addr]
    I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10
        [16-bit addr]
    I/O Range 0xe0c .. 0xffc, alignment 0x4, len 0x4
        [16-bit addr]
    IRQ: 5 7 10  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
        8-bit, not a bus master, count by byte, , Type F
    DMA: channel(s) 0 1 3 
        8-bit, not a bus master, count by byte, , Type F
TAG Start DF
    I/O Range 0x534 .. 0xff0, alignment 0x4, len 0x4
        [16-bit addr]
    I/O Range 0x380 .. 0x3f0, alignment 0x10, len 0xc
        [16-bit addr]
    I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10
        [16-bit addr]
    I/O Range 0xe0c .. 0xffc, alignment 0x4, len 0x4
        [16-bit addr]
    IRQ: 5 7 9 10 11  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
        8-bit, not a bus master, count by byte, , Type F
    DMA: channel(s) 0 1 3 
        8-bit, not a bus master, count by byte, , Type F
TAG Start DF
    I/O Range 0x534 .. 0xff0, alignment 0x4, len 0x4
        [16-bit addr]
    I/O Range 0x380 .. 0x3f0, alignment 0x10, len 0xc
        [16-bit addr]
    I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10
        [16-bit addr]
    I/O Range 0xe0c .. 0xffc, alignment 0x4, len 0x4
        [16-bit addr]
    IRQ: 5 7 9 10 11  - only one type (true/edge)
    DMA: channel(s) 0 1 3 
        8-bit, not a bus master, count by byte, , Type F
TAG End DF

Logical Device ID: OPT0001 0x0100143e #2
        Vendor register funcs 00
Device Description: Game Port
    I/O Range 0x200 .. 0x20f, alignment 0x1, len 0x1
        [16-bit addr]

Logical Device ID: OPT0002 0x0200143e #3
        Vendor register funcs 00
Device Description: MPU401
    I/O Range 0x300 .. 0x360, alignment 0x10, len 0x2
        [16-bit addr]
    IRQ: 5 7 9 10 11  - only one type (true/edge)
End Tag

Successfully got 53 resources, 4 logical fdevs
-- card select # 0x0001

CSN OPT0931 (0x3109143e), Serial Number 0xffffffff

Logical device #0
IO:  0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01

Logical device #1
IO:  0x0380 0x0380 0x0380 0x0380 0x0380 0x0380 0x0380 0x0380
IRQ 5 0
DMA 0 1
IO range check 0x00 activate 0x01

Logical device #2
IO:  0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01

Logical device #3
IO:  0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 10 0
DMA 4 4
IO range check 0x00 activate 0x01
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #121: Tue Sep 28 19:34:04 PDT 1999
    root@:/usr/src/sys/compile/MILLENNIUM
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 199310064 Hz
CPU: Pentium Pro (199.31-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x617  Stepping = 7
  Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 134217728 (131072K bytes)
avail memory = 127139840 (124160K bytes)
Preloaded elf kernel "kernel" at 0xc02f0000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
chip1: <Intel PIIX3 IDE controller> at device 1.1 on pci0
de0: <Digital 21140A Fast Ethernet> irq 9 at device 10.0 on pci0
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:40:05:36:73:56
vga-pci0: <ATI model 4750 graphics accelerator> irq 12 at device 12.0 on pci0
ncr0: <ncr 53c895 fast40 wide scsi> irq 15 at device 13.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (atapi): < ICD-900AT/ A01>, removable, iordy
wcd0: drive speed 1367KB/sec, 120KB cache
wcd0: supported read types: CD-DA
wcd0: Audio: play, 255 volume levels
wcd0: Mechanism: ejectable tray
wcd0: Medium: no/blank disc inside, unlocked
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0 at port 0x378-0x37f irq 7 on isa0
ppc0: W83877F chipset (NIBBLE-only) in COMPATIBLE mode
ppb0: IEEE1284 device found /NIBBLE/ECP/ECP_RLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 5> PJL,MLC,PCL,PCLXL
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
unknown0: <AUX0> on isa0
unknown1: <Game Port> on isa0
pcm0: <OPTi931> at port 0x534-0x537,0x380-0x38b,0x220-0x22f,0xe0c-0xe0f irq 5 drq 0,1 
on isa0
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
AD_WAIT_INIT FAILED 201 0xff
AD_WAIT_INIT FAILED 1002 0xff
unknown2: <MPU401> at port 0x300-0x301 irq 10 on isa0
Waiting 15 seconds for SCSI devices to settle
de0: enabling 100baseTX port
changing root device to da0s1a
da1 at ncr0 bus 0 target 1 lun 0
da1: <QUANTUM FIREBALL_TM2110S 300X> Fixed Direct Access SCSI-2 device 
da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da1: 2014MB (4124736 512 byte sectors: 255H 63S/T 256C)
da0 at ncr0 bus 0 target 0 lun 0
da0: <SEAGATE ST15150N 0023> Fixed Direct Access SCSI-2 device 
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)

Reply via email to