Hi
Inside ed_probe_HP_pclanp() we are doing various checks to see if the device
is there and if we hit a problem we return 0 instead of an error. Attached
is a patch for this problem.
Regards,
Mark Hittinger
Mindspring/Netcom/Dallas
[EMAIL PROTECTED]
*** if_ed.c.1 Mon Sep 13 16:31:29 1999
--- if_ed.c Mon Sep 13 16:48:33 1999
***************
*** 1387,1391 ****
((inb(sc->asic_addr + ED_HPP_ID + 2) & 0xF0) != 0) ||
(inb(sc->asic_addr + ED_HPP_ID + 3) != 0x53))
! return 0;
/*
--- 1387,1391 ----
((inb(sc->asic_addr + ED_HPP_ID + 2) & 0xF0) != 0) ||
(inb(sc->asic_addr + ED_HPP_ID + 3) != 0x53))
! return(ENXIO);
/*
***************
*** 1401,1405 ****
if (checksum != 0xFF)
! return 0;
/*
--- 1401,1405 ----
if (checksum != 0xFF)
! return(ENXIO);
/*
***************
*** 1410,1414 ****
if (((sc->hpp_id = inw(sc->asic_addr + ED_HPP_PAGE_4)) &
ED_HPP_ID_SOFT_MODEL_MASK) != 0x0000)
! return 0;
/*
--- 1410,1414 ----
if (((sc->hpp_id = inw(sc->asic_addr + ED_HPP_PAGE_4)) &
ED_HPP_ID_SOFT_MODEL_MASK) != 0x0000)
! return(ENXIO);
/*
***************
*** 1441,1445 ****
if (!(inb(sc->nic_addr + ED_P0_ISR) & ED_ISR_RST))
! return 0; /* reset did not complete */
/*
--- 1441,1445 ----
if (!(inb(sc->nic_addr + ED_P0_ISR) & ED_ISR_RST))
! return(ENXIO); /* reset did not complete */
/*
***************
*** 1456,1460 ****
if (irq >= (sizeof(ed_hpp_intr_val) / sizeof(ed_hpp_intr_val[0])))
! return 0;
/*
--- 1456,1460 ----
if (irq >= (sizeof(ed_hpp_intr_val) / sizeof(ed_hpp_intr_val[0])))
! return(ENXIO);
/*
***************
*** 1521,1525 ****
if (mem_addr != conf_maddr)
! return 0;
error = ed_alloc_memory(dev, 0, memsize);
--- 1521,1525 ----
if (mem_addr != conf_maddr)
! return(ENXIO);
error = ed_alloc_memory(dev, 0, memsize);
***************
*** 1609,1613 ****
if (bcmp(test_pattern, test_buffer,
sizeof(test_pattern)))
! return 0;
}
--- 1609,1613 ----
if (bcmp(test_pattern, test_buffer,
sizeof(test_pattern)))
! return(ENXIO);
}
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
