I'm having a similar problem with the newpcm stuff.
I have a Intel PR440FX motherboard with builtin sound (Crystal Sound System)
It worked fine until the recent changes in pnp.
I can get it to work with the Voxware drivers no problem.
Here is the relevant part of my kernel config :
controller pnp0
device pcm0 at isa? port ? irq 5 flags 0x03
Here is part of dmesg :
pcm0: <SoundBlaster Pro 3.2> at irq 5 flags 0x3 on isa0
unknown0: <CTRL> on isa0
pcm1: <CS4236> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on
isa0
unknown1: <GAME> at port 0x200-0x207 on isa0
unknown2: <MPU> at port 0x330-0x331 irq 9 on isa0
Some how it's being recognized as a SoundBlaster card and it's not.
Here is pnpinfo :
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID CSC0b36 (0x360b630e), Serial Number 0xffffffff
PnP Version 1.0, Vendor Version 1
Device Description: CS4236 Audio
Logical Device ID: CSC0000 0x0000630e #0
Device Description: WSS/SB
TAG Start DF
Good Configuration
DMA: channel(s) 1
8-bit, not a bus master, count by byte, , Type A
DMA: channel(s) 0 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 - only one type (true/edge)
I/O Range 0x534 .. 0x534, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x220 .. 0x220, alignment 0x20, len 0x10
[16-bit addr]
TAG Start DF
Acceptable Configuration
DMA: channel(s) 1 3
8-bit, not a bus master, count by byte, , Type A
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 7 9 11 12 15 - only one type (true/edge)
I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x220 .. 0x260, alignment 0x20, len 0x10
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type A
IRQ: 5 7 9 11 12 15 - only one type (true/edge)
I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
[16-bit addr]
I/O Range 0x388 .. 0x3f8, alignment 0x8, len 0x4
[16-bit addr]
I/O Range 0x220 .. 0x300, alignment 0x20, len 0x10
[16-bit addr]
TAG End DF
Logical Device ID: CSC0001 0x0100630e #1
Device Description: GAME
TAG Start DF
Good Configuration
I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8
[16-bit addr]
TAG Start DF
Acceptable Configuration
I/O Range 0x208 .. 0x208, alignment 0x8, len 0x8
[16-bit addr]
TAG End DF
Logical Device ID: CSC0010 0x1000630e #2
Device Description: CTRL
I/O Range 0x120 .. 0xff8, alignment 0x8, len 0x8
[16-bit addr]
Logical Device ID: CSC0003 0x0300630e #3
Device Description: MPU
TAG Start DF
Good Configuration
IRQ: 9 - only one type (true/edge)
I/O Range 0x330 .. 0x330, alignment 0x8, len 0x2
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 9 11 12 15 - only one type (true/edge)
I/O Range 0x300 .. 0x3f8, alignment 0x8, len 0x2
[16-bit addr]
TAG End DF
End Tag
Successfully got 44 resources, 4 logical fdevs
-- card select # 0x0001
CSN CSC0b36 (0x360b630e), Serial Number 0xffffffff
Logical device #0
IO: 0x0534 0x0534 0x0534 0x0534 0x0534 0x0534 0x0534 0x0534
IRQ 5 0
DMA 1 0
IO range check 0x00 activate 0x01
Logical device #1
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #2
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x01
Logical device #3
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 9 0
DMA 4 4
IO range check 0x00 activate 0x01
Thanks
Manfred
=====================
|| [EMAIL PROTECTED] ||
|| Ph. (415) 681-6235 ||
=====================
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
