Crap, the old kernel is gone. I was going to save the old working kernel but its gone now. I attached the old config file thou. Arthur H. Johnson II http://www.linuxberg.com Linuxberg Manager [EMAIL PROTECTED] On Sat, 4 Sep 1999, Doug Rabson wrote: > On Sat, 4 Sep 1999, Andrew Kenneth Milton wrote: > > > +----[ Arthur H. Johnson II ]--------------------------------------------- > > | I fixed the sound card problem I was having. I just commented out the pnp > > | driver. I know I will run into problems later if I ever get pnp devices, > > | but its a temporary fix. > > > > Pcm doesn't work for me anymore with or without a pnp controller defined. > > It's not even probed. > > > > I've got a genuine Sound Blaster 16 with on board SCSI (unused). > > Can I see your kernel config and dmesg lines both from an old (working) > kernel and from the new kernel. > > -- > Doug Rabson Mail: [EMAIL PROTECTED] > Nonlinear Systems Ltd. Phone: +44 181 442 9037 > >
# # ARTHUR -- Customized kernel for arthur (starwars.linuxberg.org) # # $Id: ARTHUR,v 1.182 1999/08/15 09:54:56 phk Exp $ machine i386 cpu I586_CPU ident ARTHUR maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 # PnP support for ISA controller eisa0 controller pci0 # Floppy drives controller fdc0 at isa? port IO_FD1 irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 # IDE controller and disks controller wdc0 at isa? port IO_WD1 irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port IO_WD2 irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 # ATAPI devices on wdc? device wcd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) device wst0 #IDE Tape (e.g. Travan) # SCSI Controllers # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 # NCR/Symbios Logic #controller ahb0 # EISA AHA1742 family #controller ahc0 # AHA2940 and onboard AIC7xxx devices #controller isp0 # Qlogic family #controller dpt0 # DPT Smartcache - See LINT for options! #controller adv0 at isa? port ? irq ? #controller adw0 #controller bt0 at isa? port ? irq ? #controller aha0 at isa? port ? irq ? # SCSI peripherals # Only one of each of these is needed, they are dynamically allocated. #controller scbus0 # SCSI bus (required) #device da0 # Direct Access (disks) #device sa0 # Sequential Access (tape etc) #device cd0 # CD #device pass0 # Passthrough device (direct SCSI access) # Proprietary or custom CD-ROM Interfaces #device wt0 at isa? port 0x300 irq 5 drq 1 #device mcd0 at isa? port 0x300 irq 10 #device matcd0 at isa? port 0x230 #device scd0 at isa? port 0x230 # atkbdc0 controls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 irq 7 controller ppbus0 # Parallel port bus (required) #device lpt0 # Printer #device plip0 # TCP/IP over parallel device ppi0 # Parallel port interface device #controller vpo0 # Requires scbus and da0 controller miibus0 # PCI Ethernet NICs. #device al0 # ADMtek AL981 (``Comet'') #device ax0 # ASIX AX88140A #device de0 # DEC/Intel DC21x4x (``Tulip'') #device fxp0 # Intel EtherExpress PRO/100B (82557,82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device rl0 # RealTek 8129/8139 #device sf0 # Adaptec AIC-6915 (``Starfire'') #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') #device vr0 # VIA Rhine, Rhine II #device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 irq 10 #device ex0 at isa? port? irq? #device fe0 at isa? port 0x300 irq ? #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 irq ? # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? port? irq ? # PCCARD NIC drivers. # ze and zp take over the pcic and cannot coexist with generic pccard # support, nor the ed and ep drivers they replace. #device ze0 at isa? port 0x300 irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 irq 10 iomem 0xd8000 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel, for ppp(1) pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #controller uhci0 # UHCI PCI->USB interface #controller ohci0 # OHCI PCI->USB interface #controller usb0 # USB Bus (required) #device ugen0 # Generic #device uhid0 # "Human Interface Devices" #device ukbd0 # Keyboard #device ulpt0 # Printer #controller umass0 # Disks/Mass storage - Requires scbus and da0 #device ums0 # Mouse # SB = SoundBlaster; PAS = ProAudioSpectrum; GUS = Gravis UltraSound # Controls all sound devices controller snd0 # SoundBlaster DSP driver - for SB, SB Pro, SB16, PAS(emulating SB) device sb0 at isa? port 0x220 irq 5 drq 1 # SoundBlaster 16 DSP driver - for SB16 - requires sb0 device device sbxvi0 at isa? drq 5 # SoundBlaster 16 MIDI - for SB16 - requires sb0 device device sbmidi0 at isa? port 0x300
