As in
diff -wu brooktree848.c.orig brooktree848.c
--- brooktree848.c.orig Sat Sep 4 14:38:14 1999
+++ brooktree848.c Sat Sep 4 14:38:19 1999
@@ -6865,9 +6865,6 @@
unsigned int rev = pci_get_revid(dev);
static int once;
- if (!once++)
- cdevsw_add(&bktr_cdevsw);
-
switch (type) {
case BROOKTREE_848_PCI_ID:
if (rev == 0x12) device_set_desc(dev, "BrookTree 848A");
Attaching is difficult.
Nick
On Sat, 4 Sep 1999, Nick Hibma wrote:
>
> cdevsw_add is called in devsw_module_handler and in bktr_probe. Patch
> attached. It looks like the init in bktr_probe became superfluous in
> revision 1.90 of brooktree848.c:
>
> revision 1.90
> date: 1999/08/23 20:59:12; author: phk; state: Exp; lines: +7 -20
> Convert DEVFS hooks in (most) drivers to make_dev().
>
> Diskslice/label code not yet handled.
>
> Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)
>
> Add the correct hook for devfs to kern_conf.c
>
> The net result of this excercise is that a lot less files depends on
> DEVFS,
> and devtoname() gets more sensible output in many cases.
>
> A few drivers had minor additional cleanups performed relating to cdevsw
> registration.
>
> A few drivers don't register a cdevsw{} anymore, but only use
> make_dev().
> ..."
>
> Nick
>
> On Fri, 3 Sep 1999, Kenneth Culver wrote:
>
> > It seems I have the classic IRQ conflict going on here.
> > I have 4 devices that all seem to want the same irq. For some reason the
> > USB port, the pcm driver, the bktr driver, and one other thing (I havn't
> > figured out what) all want IRQ 11. The pcm driver is driving an aureal
> > vortex right now. I have never had this problem before, and even though
> > they are all sharing the same IRQ, they all work at the same time in
> > windows. I would like to know why they won't work in FreeBSD. Here is the
> > output from the dmesg command:
> > Copyright (c) 1992-1999 The FreeBSD Project.
> > Copyright (c) 1982, 1986, 1989, 1991, 1993
> > The Regents of the University of California. All rights reserved.
> > FreeBSD 4.0-CURRENT #5: Fri Sep 3 18:57:32 EDT 1999
> > [EMAIL PROTECTED]:/usr/src/sys/compile/MYKERNEL
> > Timecounter "i8254" frequency 1193182 Hz
> > CPU: Pentium II/Xeon/Celeron (451.02-MHz 686-class CPU)
> > Origin = "GenuineIntel" Id = 0x652 Stepping = 2
> >
> > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
> > T,PSE36,MMX,FXSR>
> > real memory = 134152192 (131008K bytes)
> > avail memory = 127393792 (124408K bytes)
> > Preloaded elf kernel "kernel" at 0xc0293000.
> > Pentium Pro MTRR support enabled
> > npx0: <math processor> on motherboard
> > npx0: INT 16 interface
> > apm0: <APM BIOS> on motherboard
> > apm: found APM BIOS v1.2, connected at v1.2
> > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
> > pci0: <PCI bus> on pcib0
> > WARNING: "bktr" is usurping "bktr"'s cdevsw[]
> > pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 0.0 on pci0
> > pci1: <PCI bus> on pcib1
> > vga-pci0: <VGA-compatible display device> at device 0.0 on pci1
> > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
> > isa0: <ISA bus> on isab0
> > ata-pci0: <Intel PIIX4 IDE controller> at device 7.1 on pci0
> > ata-pci0: Busmastering DMA supported
> > ata0 at 0x01f0 irq 14 on ata-pci0
> > ata1 at 0x0170 irq 15 on ata-pci0
> > chip1: <UHCI USB controller> irq 11 at device 7.2 on pci0
> > chip2: <Intel 82371AB Power management controller> at device 7.3 on pci0
> > pcm0: <Aureal Vortex 8820> irq 11 at device 9.0 on pci0
> > pcm0: irq test failed
> > pcm0: codec timeout reading register 2 (fe7604)
> > pcm0: codec timeout reading register 26 (fe7604)
> > ac97: dac not ready
> > bktr0: <BrookTree 878> irq 11 at device 13.0 on pci0
> > bktr0: could not map interrupt
> > device_probe_and_attach: bktr0 attach returned 6
> > pci0: unknown card DD^0878 (vendor=0x109e, dev=0x0878) at 13.1 irq 11
> > de0: <Digital 21140A Fast Ethernet> irq 10 at device 15.0 on pci0
> > de0: 21140A [10-100Mb/s] pass 2.2
> > de0: address 00:c0:f0:1f:21:02
> > pci0: unknown card DPZ0002 (vendor=0x121a, dev=0x0002) at 17.0
> > pci0: unknown card DPZ0002 (vendor=0x121a, dev=0x0002) at 19.0
> > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
> > fdc0: FIFO enabled, 8 bytes threshold
> > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> > atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
> > psm0: model IntelliMouse, device ID 3
> > vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
> > sc0: <System console> on isa0
> > sc0: VGA <16 virtual consoles, flags=0x200>
> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> > sio0: type 16550A
> > sio1 at port 0x2f8-0x2ff irq 3 on isa0
> > sio1: type 16550A
> > ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
> > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> > plip0: <PLIP network interface> on ppbus 0
> > lpt0: <generic printer> on ppbus 0
> > lpt0: Interrupt-driven port
> > ppi0: <generic parallel i/o> on ppbus 0
> > vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus 0
> > vpo0: EPP 1.9 mode
> > ata0: master: setting up UDMA2 mode on PIIX4 chip OK
> > ad0: <Maxtor 90845D4/GAS54112> ATA-4 disk at ata0 as master
> > ad0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
> > ad0: piomode=4, dmammode=2, udmamode=2
> > ad1: 16 secs/int, 0 depth queue, DMA mode
> > Creating DISK ad1
> > Creating DISK wd1
> > ata1: master: setting up UDMA2 mode on PIIX4 chip OK
> > ad2: <FUJITSU MPC3064AT/6020> ATA-3 disk at ata1 as master
> > ad2: 6187MB (12672450 sectors), 13410 cyls, 15 heads, 63 S/T, 512 B/S
> > ad2: piomode=4, dmamode=2, udmamode=2
> > ad2: 16 secs/int, 0 depth queue, DMA mode
> > Creating DISK ad2
> > Creating DISK wd2
> > atapi: piomode=4, dmamode=2, udmamode=-1
> > atapi: PIO transfer mode set
> > acd0: <CD-ROM 40X/AKU/U30> CDROM drive at ata1 as slave
> > acd0: drive speed 0 - 6875KB/sec, 128KB cache
> > acd0: supported read types: CD-DA
> > acd0: Audio: play, 255 volume levels
> > acd0: Mechanism: ejectable tray
> > acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
> > da0 at vpo0 bus 0 target 6 lun 0
> > da0: <IOMEGA ZIP 100 D.09> Removable Direct Access SCSI-2 device
> > da0: Attempt to query device size failed: NOT READY, Medium not present
> > changing root device to wd1s1a
> > de0: enabling 10baseT port
> >
> > If someone can tell me how to make those devices stop sharing the same IRQ
> > I'd appreciate it. Thanks.
> >
> > Kenneth Culver
> >
> >
> >
> > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > with "unsubscribe freebsd-current" in the body of the message
> >
> >
>
> --
> e-Mail: [EMAIL PROTECTED]
>
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-current" in the body of the message
>
>
--
e-Mail: [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
