Doug Rabson wrote:
> I have just taken a pass through the aha_isa driver to convert it to
> newbus and to make it use the new pnp system. Unfortunately I don't own
> the hardware so I need testers, preferably with both non-pnp and pnp
> cards. The code does compile but I have not tested it at all. Here is
> the patch:
Seems to work here. I have a: (set up to be non-PnP)
aha0 at port 0x130-0x133,0x130-0x133 irq 10 drq 6 on isa0
aha0: AHA-1542CP FW Rev. F.0 (ID=46) SCSI Host Adapter, SCSI ID 7, 16 CCBs
with the following attached to it:
sa0 at aha0 bus 0 target 2 lun 0
sa0: <SONY SDX-300C 04b1> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0 at aha0 bus 0 target 3 lun 0
cd0: <MATSHITA CD-ROM CR-508 XS03> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: cd present [312833 x 2048 byte records]
cd1 at aha0 bus 0 target 5 lun 0
cd1: <PHILIPS CDD2600 1.07> Removable CD-ROM SCSI-2 device
cd1: 3.300MB/s transfers
cd1: cd present [306027 x 2048 byte records]
CD's can be read fine; tapes seem to write and read correctly. The only
thing I haven't tried is to write a CD... Let me know if there is any
more info I can provide.
Regards,
Chris
-----
Chris D. Faulhaber <[EMAIL PROTECTED]> | All the true gurus I've met never
System/Network Administrator, | claimed they were one, and always
Reality Check Information, Inc. | pointed to someone better.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
