I have 3 AHC devices that work great under -STABLE, but -CURRENT doesn't even acknowledge they exist. GENERIC kernels on both. Here is the boot information from the working -STABLE system: Probing for devices on PCI bus 1: ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 21 on pci1.4.0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 22 on pci1.6.0 ahc1: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc2: <Adaptec aic7860 SCSI adapter> rev 0x03 int a irq 20 on pci1.8.0 ahc2: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs -CURRENT sees nothing. What additional information will I need to provide? -- David Cross | email: [EMAIL PROTECTED] Systems Administrator/Research Programmer | Web: http://www.cs.rpi.edu/~crossd Rensselaer Polytechnic Institute, | Ph: 518.276.2860 Department of Computer Science | Fax: 518.276.4033 I speak only for myself. | WinNT:Linux::Linux:FreeBSD To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
