https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=275306
Bug ID: 275306
Summary: 14.0-RELEASE: starting jail causes panic
Product: Base System
Version: 14.0-RELEASE
Hardware: amd64
OS: Any
Status: New
Severity: Affects Only Me
Priority: ---
Component: kern
Assignee: b...@freebsd.org
Reporter: lexi.free...@le-fay.org
everything was working fine on 13.2.
after upgrading to 14.0, starting a jail causes a kernel panic. see
dmesg/console output below.
this is reproducible: setting jail_enable="NO" allows the system to start,
trying to build packages with poudriere, or just starting a configured jail,
causes a panic.
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-RELEASE #15 releng/14.0-n265380-f9716eee8ab4: Fri Nov 24 11:33:16
GMT 2023
r...@hemlock.eden.le-fay.org:/usr/obj/usr/src/amd64.amd64/sys/HEMLOCK amd64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git
llvmorg-14.0.5-0-gc12386ae247c)
VT(efifb): resolution 1280x1024
CPU: AMD Ryzen 7 2700X Eight-Core Processor (3700.26-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x800f82 Family=0x17 Model=0x8 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD
Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
Structured Extended
Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16555761664 (15788 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
Security policy loaded: MAC/ntpd (mac_ntpd)
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 6 5 1 7 4 2 3
TCP_ratelimit: Is now initialized
TCP Hpts created 8 swi interrupt threads and bound 0 to cpus
random: entropy device external interface
kbd0 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xbde25000-0xbde2501e
smbios0: Version: 3.3, BCD Revision: 3.3
ossl0: <OpenSSL crypto>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object
(Buffer) (20221020/nsarguments-361)
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
amdsmn0: <AMD Family 17h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci1: <ACPI PCI bus> on pcib1
mps0: <Avago Technologies (LSI) SAS2008> port 0xf000-0xf0ff mem
0xfbbc0000-0xfbbc3fff,0xfbb80000-0xfbbbffff irq 24 at device 0.0 on pci1
mps0: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd
mps0: IOCCapabilities:
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib2: <ACPI PCI-PCI bridge> at device 1.3 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <AMD 400 Series USB 3.1 controller> mem 0xfb4a0000-0xfb4a7fff irq 32 at
device 0.0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfb480000-0xfb49ffff irq 33 at device 0.1 on
pci2
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib3: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem
0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 32 at
device 0.0 on pci4
vgapci0: Boot video device
pcib5: <ACPI PCI-PCI bridge> irq 33 at device 1.0 on pci3
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 32 at device 4.0 on pci3
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 33 at device 5.0 on pci3
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 34 at device 6.0 on pci3
pci8: <ACPI PCI bus> on pcib8
ahci1: <ASMedia ASM1062 AHCI SATA controller> port
0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem
0xfb300000-0xfb3001ff irq 34 at device 0.0 on pci8
ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci1: quirks=0xc00000<NOCCS,NOAUX>
ahcich8: <AHCI channel> at channel 0 on ahci1
ahcich9: <AHCI channel> at channel 1 on ahci1
pcib9: <ACPI PCI-PCI bridge> irq 35 at device 7.0 on pci3
pci9: <ACPI PCI bus> on pcib9
pci9: <network, ethernet> at device 0.0 (no driver attached)
pcib10: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci10: <ACPI PCI bus> on pcib10
ix0: <Intel(R) X540-AT2> mem 0xe0200000-0xe03fffff,0xe0404000-0xe0407fff irq 55
at device 0.0 on pci10
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 8 RX queues 8 TX queues
ix0: Using MSI-X interrupts with 9 vectors
ix0: allocated for 8 queues
ix0: allocated for 8 rx queues
ix0: Ethernet address: b4:96:91:45:a2:14
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: eTrack 0x800005f9 PHY FW V272
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: <Intel(R) X540-AT2> mem 0xe0000000-0xe01fffff,0xe0400000-0xe0403fff irq 54
at device 0.1 on pci10
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 8 RX queues 8 TX queues
ix1: Using MSI-X interrupts with 9 vectors
ix1: allocated for 8 queues
ix1: allocated for 8 rx queues
ix1: Ethernet address: b4:96:91:45:a2:16
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: eTrack 0x800005f9 PHY FW V272
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
pcib11: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci11: <ACPI PCI bus> on pcib11
pci11: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfb600000-0xfb6fffff irq 37 at
device 0.3 on pci11
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib12: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci12: <ACPI PCI bus> on pcib12
ahci2: <AMD KERNCZ AHCI SATA controller> mem 0xfb908000-0xfb908fff irq 42 at
device 0.2 on pci12
ahci2: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich10: <AHCI channel> at channel 0 on ahci2
pci12: <multimedia, HDA> at device 0.3 (no driver attached)
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
ns8250: UART FCR is broken
ns8250: UART FCR is broken
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC-low" frequency 1849999267 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
WARNING: Adding ifaddrs to all fibs has been turned off by default. Consider
tuning net.add_addr_allfibs if needed
ugen0.1: <AMD XHCI root HUB> at usbus0
ugen1.1: <AMD XHCI root HUB> at usbus1
uhub0 on usbus0
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1 on usbus1
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA>
K8/16/48/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
Trying to mount root from zfs:zroot/ROOT/default []...
uhub1: 8 ports with 8 removable, self powered
uhub0: 22 ports with 22 removable, self powered
Root mount waiting for: CAM usbus0
ugen0.2: <vendor 0x04d9 daskeyboard> at usbus0
ukbd0 on uhub0
ukbd0: <vendor 0x04d9 daskeyboard, class 0/0, rev 1.10/3.90, addr 1> on usbus0
kbd1 at ukbd0
ums0 on uhub0
ums0: <vendor 0x04d9 daskeyboard, class 0/0, rev 1.10/3.90, addr 1> on usbus0
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich5 bus 0 scbus4 target 0 lun 0
ada0: <KINGSTON SUV400S37240G 0C3FD6SD> ACS-4 ATA SATA 3.x device
ada0: Serial Number 50026B776601F3DC
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
ada1 at ahcich9 bus 0 scbus6 target 0 lun 0
ada1: <CT250MX500SSD1 M3CR045> ACS-3 ATA SATA 3.x device
ada1: Serial Number 2240E67118A8
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 238475MB (488397168 512 byte sectors)
cd0 at ahcich0 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp CDDVDW TS-H653B SI01> Removable CD-ROM SCSI device
cd0: Serial Number � �;��x�o�Q �\^A�\^P
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
da0 at mps0 bus 0 scbus0 target 4 lun 0
da0: <SEAGATE STCRSEI1CLAR8000 CA01> Fixed Direct Access SPC-5 SCSI device
da0: Serial Number WSD6Z597
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 7630885MB (15628053168 512 byte sectors)
da3 at mps0 bus 0 scbus0 target 9 lun 0
da3: <SEAGATE STCRSEI1CLAR8000 CA01> Fixed Direct Access SPC-5 SCSI device
da3: Serial Number WSD4LE4D
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 7630885MB (15628053168 512 byte sectors)
da1 at mps0 bus 0 scbus0 target 7 lun 0
da1: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number WD-WCAZAD107331
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors)
da1: quirks=0x8<4K>
da5 at mps0 bus 0 scbus0 target 11 lun 0
da5: <SEAGATE STCRSEI1CLAR8000 CA01> Fixed Direct Access SPC-5 SCSI device
da5: Serial Number WSD6TJWQ
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 7630885MB (15628053168 512 byte sectors)
da4 at mps0 bus 0 scbus0 target 10 lun 0
da4: <SEAGATE STCRSEI1CLAR8000 CA01> Fixed Direct Access SPC-5 SCSI device
da4: Serial Number WSD6Z6JB
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 7630885MB (15628053168 512 byte sectors)
da2 at mps0 bus 0 scbus0 target 8 lun 0
da2: <ATA TOSHIBA DT01ACA2 ABB0> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number 563J53DAS
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors)
GEOM: da1: the primary GPT table is corrupt or invalid.
GEOM: da1: using the secondary instead -- recovery strongly advised.
GEOM: da2: the primary GPT table is corrupt or invalid.
GEOM: da2: using the secondary instead -- recovery strongly advised.
/etc/rc: WARNING: Kernel dumps will be written to the swap partition without
encryption.
Setting hostuuid: 06006b9c-72ba-0000-0000-000000000000.
Setting hostid: 0x3f003717.
GEOM: da1: the primary GPT table is corrupt or invalid.
GEOM: da1: using the secondary instead -- recovery strongly advised.
GEOM: da2: the primary GPT table is corrupt or invalid.
GEOM: da2: using the secondary instead -- recovery strongly advised.
GEOM_ELI: Device ada0p2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: accelerated software
Loading key for data/ccache from file:///etc/zfs/data.key..
Loading key for data/iscsi from file:///etc/zfs/data.key..
Loading key for data/jail from file:///etc/zfs/data.key..
Loading key for data/jellyfin from file:///etc/zfs/data.key..
Loading key for data/packages from file:///etc/zfs/data.key..
Loading key for data/poudriere from file:///etc/zfs/data.key..
Loading key for data/public/Books from file:///etc/zfs/data.key..
Loading key for data/public/CalibreLibrary from file:///etc/zfs/data.key..
Loading key for data/public/Comics from file:///etc/zfs/data.key..
Loading key for data/public/Films from file:///etc/zfs/data.key..
Loading key for data/public/Miscellaneous from file:///etc/zfs/data.key..
Loading key for data/public/Music from file:///etc/zfs/data.key..
Loading key for data/public/Software from file:///etc/zfs/data.key..
Loading key for data/public/TV from file:///etc/zfs/data.key..
Loading key for data/public/Torrents_new from file:///etc/zfs/data.key..
Loading key for zroot/jail from file:///etc/zfs/data.key..
Starting file system checks:
/dev/gpt/efiboot0: 6 files, 258 MiB free (16519 clusters)
FIXED
/dev/gpt/efiboot0: MARKING FILE SYSTEM CLEAN
Mounting local filesystems:.
Key already loaded for data/ccache.
Key already loaded for data/iscsi.
Key already loaded for data/jail.
Key already loaded for data/jellyfin.
Key already loaded for data/packages.
Key already loaded for data/poudriere.
Key already loaded for data/public/Books.
Key already loaded for data/public/CalibreLibrary.
Key already loaded for data/public/Comics.
Key already loaded for data/public/Films.
Key already loaded for data/public/Miscellaneous.
Key already loaded for data/public/Music.
Key already loaded for data/public/Software.
Key already loaded for data/public/TV.
Key already loaded for data/public/Torrents_new.
Key already loaded for zroot/jail.
Updating CPU Microcode...
CPU: AMD Ryzen 7 2700X Eight-Core Processor (3700.00-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x800f82 Family=0x17 Model=0x8 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD
Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
Structured Extended
Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr,IBPB>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
Done.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
/usr/local/lib/compat/pkg /usr/local/lib/compat/pkg
/usr/local/lib/perl5/5.36/mach/CORE /usr/local/lib/samba4
32-bit compatibility ldconfig path:
Setting hostname: hemlock.eden.le-fay.org.
Setting up harvesting:
PURE_RDRAND,[CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
bridge0: Ethernet address: 58:9c:fc:10:95:57
epair0a: Ethernet address: 02:58:0b:2e:3b:0a
epair0b: Ethernet address: 02:58:0b:2e:3b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a
epair1a: Ethernet address: 02:50:6c:db:6f:0a
epair1b: Ethernet address: 02:50:6c:db:6f:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a
Created clone interfaces: bridge0 epair0a epair0b epair1a epair1b.
lo0: link state changed to UP
ix1: link state changed to UP
ix1: link state changed to DOWN
bridge0: link state changed to UP
ix1: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
Starting Network: lo0 ix0 ix1 bridge0 epair0a epair0b epair1a epair1b.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4e53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
ether b4:96:91:45:a2:14
media: Ethernet autoselect
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
ix1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu
1500
options=4a538b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,NOMAP>
ether b4:96:91:45:a2:16
inet6 fe80::b696:91ff:fe45:a216%ix1 prefixlen 64 scopeid 0x2
media: Ethernet autoselect
status: no carrier
nd6 options=1<PERFORMNUD>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 58:9c:fc:10:95:57
inet 10.1.6.13 netmask 0xffffff00 broadcast 10.1.6.255
inet6 fe80::5a9c:fcff:fe10:9557%bridge0 prefixlen 64 scopeid 0x6
inet6 2001:8b0:aab5:106::12 prefixlen 64
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: epair1a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 9 priority 128 path cost 2000
member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 7 priority 128 path cost 2000
member: ix1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 2 priority 128 path cost 20000
groups: bridge
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0
mtu 1500
options=8<VLAN_MTU>
ether 02:58:0b:2e:3b:0a
groups: epair
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
epair0b: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:58:0b:2e:3b:0b
groups: epair
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
epair1a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0
mtu 1500
options=8<VLAN_MTU>
ether 02:50:6c:db:6f:0a
groups: epair
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
epair1b: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:50:6c:db:6f:0b
groups: epair
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting Network: ix0.
ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4e53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
ether b4:96:91:45:a2:14
media: Ethernet autoselect
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
syscons does not exist in /etc/rc.d or the local startup
directories (/usr/local/etc/rc.d), or is not executable
moused does not exist in /etc/rc.d or the local startup
directories (/usr/local/etc/rc.d), or is not executable
Starting Network: epair0b.
epair0b: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:58:0b:2e:3b:0b
groups: epair
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting Network: epair1b.
epair1b: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:50:6c:db:6f:0b
groups: epair
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting pflog.
pflog0: promiscuous mode enabled
2023-11-24T13:15:27.262943+00:00 hemlock.eden.le-fay.org pflogd 62468 - -
[priv]: msg PRIV_OPEN_LOG received
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add host 127.0.0.1: gateway lo0 fib 1: route already in table
add host 127.0.0.1: gateway lo0 fib 2: route already in table
add net default: gateway 10.1.6.1 fib 0
add host ::1: gateway lo0 fib 1,2
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1 fib 0,1,2
add net ff02::: gateway ::1 fib 0,1,2
add net ::ffff:0.0.0.0: gateway ::1 fib 0,1,2
add net ::0.0.0.0: gateway ::1 fib 0,1,2
add net default: gateway 2001:8B0:AAB5:106::1 fib 0
Enabling pfpfctl: DIOCADDRULENV: File exists
/etc/rc: WARNING: Unable to load /etc/pf.conf.
.
Starting nfsuserd.
Starting kdc.
Starting ctld.
Starting kadmind.
Starting gssd.
Creating and/or trimming log files.
Clearing /tmp.
Updating motd:.
Updating /var/run/os-release done.
Starting syslogd.
No core dumps found.
Mounting late filesystems:.
Starting ntpd.
Starting powerd.
Starting dbus.
Starting avahi-daemon.
NFSv4 only server
Starting mountd.
Starting nfsd.
Performing sanity check on Samba configuration: OK
Starting smbd.
ix1: link state changed to UP
Nov 24 13:15:28 hemlock smbd[46314]: [2023/11/24 13:15:28.268818, 0]
../../source3/smbd/server.c:1741(main)
Nov 24 13:15:28 hemlock smbd[46314]: smbd version 4.16.11 started.
Nov 24 13:15:28 hemlock smbd[46314]: Copyright Andrew Tridgell and the Samba
Team 1992-2022
Starting pushgateway.
Starting rsyncd.
Starting inetd.
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Performing sanity check on nginx configuration:
nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok
nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful
Starting nginx.
Starting node_exporter.
postfix/postfix-script: starting the Postfix mail system
Starting smartd.
Starting background file system checks in 60 seconds.
Starting jails:
tcp_vnet_init: WARNING: unable to initialise TCP stats
lo0: link state changed to UP
panic: VERIFY0(0 == spa_do_crypt_abd(B_TRUE, spa, &zio->io_bookmark,
BP_GET_TYPE(bp), BP_GET_DEDUP(bp), BP_SHOULD_BYTESWAP(bp), salt, iv, mac,
psize, zio->io_abd, eabd, &no_crypt)) failed (0 == 5)
cpuid = 0
time = 1700831735
KDB: stack backtrace:
#0 0xffffffff8088054d at kdb_backtrace+0x5d
#1 0xffffffff8083bdc1 at vpanic+0x131
#2 0xffffffff80393a4a at spl_panic+0x3a
#3 0xffffffff80506cad at zio_encrypt+0x5ad
#4 0xffffffff80504089 at zio_execute+0x39
#5 0xffffffff808a1431 at taskqueue_run_locked+0x161
#6 0xffffffff808a2372 at taskqueue_thread_loop+0xb2
#7 0xffffffff807fd6b3 at fork_exit+0x73
#8 0xffffffff80b64f6e at fork_trampoline+0xe
Uptime: 41s
Dumping 914 out of 16283 MB:..2%..11%..21%..32%..41%..51%..62%..72%..81%..91%
--
You are receiving this mail because:
You are the assignee for the bug.
