https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=254841
Bug ID: 254841
Summary: usr.sbin/mpsutil: add functionality (temperature
monitoring, PCIe speed etc)
Product: Base System
Version: CURRENT
Hardware: Any
OS: Any
Status: New
Keywords: patch
Severity: Affects Only Me
Priority: ---
Component: bin
Assignee: b...@freebsd.org
Reporter: freebsd-po...@dan.me.uk
CC: sco...@freebsd.org
Created attachment 223884
--> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=223884&action=edit
Add functionality to mpsutil
The attached patch adds a little functionality to the 'mpsutil' (and therefore
probably also mprutil).
In the 'show adapter' output, it now shows PCIe width and speed, IOC Speed, and
(the reason I wrote this patch) the temperature of the controller.
I run LSI 9206-16e cards which are notoriously hot (literally boil water hot!)
and I wanted to monitor its temperature but this was awkward before.
I added the other features because they seemed useful and were already fetched
in the same config page as the temperature. (note: the temperature units come
from the card itself, although i've only ever seen Celcius)
Here's an example output on a LSI 9207-8i card I used for testing the patch:
mps0 Adapter:
Board Name: SAS9207-8i
Board Assembly: H3-25590-00B
Chip Name: LSISAS2308
Chip Revision: ALL
BIOS Revision: 7.29.00.00
Firmware Revision: 20.00.07.00
Integrated RAID: no
PCIe Width/Speed: x8 (5.0 GB/sec)
IOC Speed: Full
Temperature: 63 C
PhyNum CtlrHandle DevHandle Disabled Speed Min Max Device
0 N 1.5 6.0 SAS Initiator
1 N 1.5 6.0 SAS Initiator
2 N 1.5 6.0 SAS Initiator
3 N 1.5 6.0 SAS Initiator
4 0001 0009 N 6.0 1.5 6.0 SAS Initiator
5 0002 000a N 6.0 1.5 6.0 SAS Initiator
6 0003 000b N 6.0 1.5 6.0 SAS Initiator
7 0004 000c N 6.0 1.5 6.0 SAS Initiator
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
freebsd-bugs@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "freebsd-bugs-unsubscr...@freebsd.org"
