https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=248630
--- Comment #2 from Mike Biesele <m...@biesele.com> ---
library ~ # sg_ses -p 1 /dev/ses0
HP MSA60 2.18
Configuration diagnostic page:
number of secondary subenclosures: 0
generation code: 0x0
enclosure descriptor list
Subenclosure identifier: 0 [primary]
relative ES process id: 1, number of ES processes: 1
number of type descriptor headers: 10
enclosure logical identifier (hex): 5001438001571280
enclosure vendor: HP product: MSA60 rev: 2.18
vendor-specific data:
48 50 20 4d 53 41 20 53 74 6f 72 61 67 65 20 45 HP MSA Storage E
6e 63 6c 6f 73 75 72 65 20 20 20 20 20 20 20 20 nclosure
20 00 00 00 ...
type descriptor header and text list
Element type: Array device slot, subenclosure id: 0
number of possible elements: 12
text: Bay
Element type: Power supply, subenclosure id: 0
number of possible elements: 2
text: Power Supply
Element type: Cooling, subenclosure id: 0
number of possible elements: 2
text: Fans
Element type: Cooling, subenclosure id: 0
number of possible elements: 2
text: Fans
Element type: Temperature sensor, subenclosure id: 0
number of possible elements: 4
text: Temperature Sensor
Element type: Enclosure services controller electronics, subenclosure id: 0
number of possible elements: 1
text: Enclosure Service Controller
Element type: Enclosure, subenclosure id: 0
number of possible elements: 1
text: Enclosure
Element type: SAS expander, subenclosure id: 0
number of possible elements: 1
text: SAS Expander
Element type: SAS connector, subenclosure id: 0
number of possible elements: 36
text: SAS Expander Phy
Element type: vendor specific [0x80], subenclosure id: 0
number of possible elements: 1
text: HP 7-Segment Display
library ~ # sg_ses -p 2 /dev/ses0
HP MSA60 2.18
Enclosure Status diagnostic page:
INVOP=0, INFO=0, NON-CRIT=0, CRIT=0, UNRECOV=0
generation code: 0x0
status descriptor list
Element type: Array device slot, subenclosure id: 0 [ti=0]
Overall descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: Unsupported
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 0 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 1 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=1, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 2 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 3 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 4 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 5 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 6 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 7 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 8 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 9 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 10 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element 11 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
OK=0, Reserved device=0, Hot spare=0, Cons check=0
In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0
App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0
Ready to insert=0, RMV=0, Ident=0, Report=0
App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0
Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0
Element type: Power supply, subenclosure id: 0 [ti=1]
Overall descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: Unsupported
Ident=0, Do not remove=0, DC overvoltage=0, DC undervoltage=0
DC overcurrent=0, Hot swap=0, Fail=0, Requested on=0, Off=0
Overtmp fail=0, Temperature warn=0, AC fail=0, DC fail=0
Element 0 descriptor:
Predicted failure=0, Disabled=0, Swap=1, status: OK
Ident=0, Do not remove=0, DC overvoltage=0, DC undervoltage=0
DC overcurrent=0, Hot swap=0, Fail=0, Requested on=1, Off=0
Overtmp fail=0, Temperature warn=0, AC fail=0, DC fail=0
Element 1 descriptor:
Predicted failure=0, Disabled=0, Swap=1, status: OK
Ident=0, Do not remove=0, DC overvoltage=0, DC undervoltage=0
DC overcurrent=0, Hot swap=0, Fail=0, Requested on=1, Off=0
Overtmp fail=0, Temperature warn=0, AC fail=0, DC fail=0
Element type: Cooling, subenclosure id: 0 [ti=2]
Overall descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: Unsupported
Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=0
Off=0, Actual speed=0 rpm, Fan stopped
Element 0 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=1
Off=0, Actual speed=4200 rpm, Fan at lowest speed
Element 1 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=1
Off=0, Actual speed=3600 rpm, Fan at lowest speed
Element type: Cooling, subenclosure id: 0 [ti=3]
Overall descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: Unsupported
Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=0
Off=0, Actual speed=0 rpm, Fan stopped
Element 0 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=1
Off=0, Actual speed=3600 rpm, Fan at lowest speed
Element 1 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=1
Off=0, Actual speed=3600 rpm, Fan at lowest speed
Element type: Temperature sensor, subenclosure id: 0 [ti=4]
Overall descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: Unsupported
Ident=0, Fail=0, OT failure=0, OT warning=0, UT failure=0
UT warning=0
Temperature: <reserved>
Element 0 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Fail=0, OT failure=0, OT warning=0, UT failure=0
UT warning=0
Temperature=27 C
Element 1 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Fail=0, OT failure=0, OT warning=0, UT failure=0
UT warning=0
Temperature=27 C
Element 2 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Fail=0, OT failure=0, OT warning=0, UT failure=0
UT warning=0
Temperature=24 C
Element 3 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Fail=0, OT failure=0, OT warning=0, UT failure=0
UT warning=0
Temperature=24 C
Element type: Enclosure services controller electronics, subenclosure id: 0
[ti=5]
Overall descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: Unsupported
Ident=0, Fail=0, Do not remove=0, Report=0, Hot swap=0
Element 0 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Fail=0, Do not remove=0, Report=1, Hot swap=0
Element type: Enclosure, subenclosure id: 0 [ti=6]
Overall descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: Unsupported
Ident=0, Time until power cycle=0, Failure indication=0
Warning indication=0, Requested power off duration=0
Failure requested=0, Warning requested=0
Element 0 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Time until power cycle=0, Failure indication=0
Warning indication=0, Requested power off duration=0
Failure requested=0, Warning requested=0
Element type: SAS expander, subenclosure id: 0 [ti=7]
Overall descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: Unsupported
Ident=0, Fail=0
Element 0 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Fail=0
Element type: SAS connector, subenclosure id: 0 [ti=8]
Overall descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 0 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 1 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 2 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 3 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 4 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 5 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 6 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 7 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 8 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 9 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 10 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 11 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 12 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 13 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 14 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 15 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 16 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 17 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 18 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 19 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 20 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 21 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 22 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 23 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 24 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 25 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 26 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 27 descriptor:
Predicted failure=0, Disabled=1, Swap=0, status: Unsupported
Ident=0, No information
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 28 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys]
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 29 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 30 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys]
Connector physical link=0x2, Mated=0, Fail=0, OC=0
Element 31 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys]
Connector physical link=0x3, Mated=0, Fail=0, OC=0
Element 32 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys]
Connector physical link=0x0, Mated=0, Fail=0, OC=0
Element 33 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys]
Connector physical link=0x1, Mated=0, Fail=0, OC=0
Element 34 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys]
Connector physical link=0x2, Mated=0, Fail=0, OC=0
Element 35 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Ident=0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys]
Connector physical link=0x3, Mated=0, Fail=0, OC=0
Element type: vendor specific [0x80], subenclosure id: 0 [ti=9]
Overall descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: Unsupported
Vendor specific element type, status in hex: 00 00 00 00
Element 0 descriptor:
Predicted failure=0, Disabled=0, Swap=0, status: OK
Vendor specific element type, status in hex: 01 20 ff ff
library ~ # sg_ses -p 7 /dev/ses0
HP MSA60 2.18
sg_ses failed: Illegal request
library ~ # sg_ses -p 0xa /dev/ses0
HP MSA60 2.18
Primary enclosure logical identifier (hex): 5001438001571280
Additional element status diagnostic page:
generation code: 0x0
additional element status descriptor list
Element type: Array device slot, subenclosure id: 0 [ti=0]
Element index: 1 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 1
phy index: 0
SAS device type: no SAS device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5001438001571280
SAS address: 0x5001438001571281
phy identifier: 0x0
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
Element index: 2 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 2
phy index: 0
SAS device type: end device
initiator port for:
target port for: SSP
attached SAS address: 0x5001438001571280
SAS address: 0x5000c50034cd2731
phy identifier: 0x1
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
Element index: 3 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 3
phy index: 0
SAS device type: no SAS device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5001438001571280
SAS address: 0x5001438001571283
phy identifier: 0x0
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
Element index: 4 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 4
phy index: 0
SAS device type: no SAS device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5001438001571280
SAS address: 0x5001438001571284
phy identifier: 0x0
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
Element index: 5 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 5
phy index: 0
SAS device type: no SAS device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5001438001571280
SAS address: 0x5001438001571285
phy identifier: 0x0
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
Element index: 6 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 6
phy index: 0
SAS device type: no SAS device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5001438001571280
SAS address: 0x5001438001571286
phy identifier: 0x0
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
Element index: 7 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 7
phy index: 0
SAS device type: no SAS device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5001438001571280
SAS address: 0x5001438001571287
phy identifier: 0x0
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
Element index: 8 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 8
phy index: 0
SAS device type: no SAS device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5001438001571280
SAS address: 0x5001438001571288
phy identifier: 0x0
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
Element index: 9 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 9
phy index: 0
SAS device type: no SAS device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5001438001571280
SAS address: 0x5001438001571289
phy identifier: 0x0
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
Element index: 10 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 10
phy index: 0
SAS device type: no SAS device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5001438001571280
SAS address: 0x500143800157128a
phy identifier: 0x0
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
Element index: 11 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 11
phy index: 0
SAS device type: no SAS device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5001438001571280
SAS address: 0x500143800157128b
phy identifier: 0x0
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
Element index: 12 eiioe=0
Transport protocol: SAS
number of phys: 2, not all phys: 1, device slot number: 12
phy index: 0
SAS device type: no SAS device attached
initiator port for:
target port for: SATA_device
attached SAS address: 0x5001438001571280
SAS address: 0x500143800157128c
phy identifier: 0x0
phy index: 1
SAS device type: no SAS device attached
initiator port for:
target port for:
attached SAS address: 0x0
SAS address: 0x0
phy identifier: 0x0
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
freebsd-bugs@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "freebsd-bugs-unsubscr...@freebsd.org"
