https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=204521
--- Comment #278 from Henri Hennebert <[email protected]> --- (In reply to Zeus Panchenko from comment #277) For the panic during mount, as the card is detected read-only, you must mount it read-only. Is the switch on the card on read-only? The rtsx_map_sd_drive() not use is normal because I eliminate the vendor settings code. I encounter from time to time the problem with: rtsx0: Controller timeout for CMD41 rtsx0: Soft reset rtsx0: Controller timeout for CMD55 rtsx0: Soft reset rtsx0: Controller timeout for CMD55 rtsx0: Soft reset rtsx0: Controller timeout for CMD55 rtsx0: Soft reset mmc0: ACMD41 failed, RESULT: 4 and then: rtsx0: Controller timeout for CMD2 rtsx0: Soft reset rtsx0: Controller timeout for CMD2 rtsx0: Soft reset rtsx0: Controller timeout for CMD2 rtsx0: Soft reset rtsx0: Controller timeout for CMD2 rtsx0: Soft reset mmc0: detached But then if I remove the card and reinsert it, it is detected correctly. Can you change the switch on the card and see if it is detected read-write? Next it will be fine to test with the last master branch (20b8fc8) because I introduce some corrections. Note that from 3 to 11 July I will be in holidays :-) Thanks for your perseverance! -- You are receiving this mail because: You are the assignee for the bug. _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-bugs To unsubscribe, send any mail to "[email protected]"
