https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=245348
--- Comment #5 from Bertrand Petit <bs...@phoe.frmug.org> ---
(In reply to cyril from comment #4)
Here are the requested probes.
# camcontrol devlist
<INTEL SSDSA2M040G2GC 2CV102M3> at scbus2 target 0 lun 0 (pass0,ada0)
<WDC WD4005FZBX-00K5WB0 01.01A01> at scbus4 target 0 lun 0 (pass1,ada1)
<TOSHIBA HDWQ140 FJ1M> at scbus5 target 0 lun 0 (pass2,ada2)
<HL-DT-ST DVDRAM GH24NSD1 LG00> at scbus7 target 0 lun 0 (pass3,cd0)
<AHCI SGPIO Enclosure 2.00 0001> at scbus8 target 0 lun 0 (pass4,ses0)
<Kingston DataTraveler 2.0 1.00> at scbus10 target 0 lun 0 (da0,pass5)
The 12.1-RELEASE memstick is shown as da0.
# pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x0c008086 rev=0x06
hdr=0x00
vendor = 'Intel Corporation'
device = '4th Gen Core Processor DRAM Controller'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x330b103c chip=0x0c018086 rev=0x06
hdr=0x01
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16
Controller'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:1:1: class=0x060400 card=0x330b103c chip=0x0c058086 rev=0x06
hdr=0x01
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8
Controller'
class = bridge
subclass = PCI-PCI
xhci0@pci0:0:20:0: class=0x0c0330 card=0x330d103c chip=0x8c318086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB xHCI'
class = serial bus
subclass = USB
ehci0@pci0:0:26:0: class=0x0c0320 card=0x330d103c chip=0x8c2d8086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB EHCI'
class = serial bus
subclass = USB
pcib3@pci0:0:28:0: class=0x060400 card=0x330d103c chip=0x8c108086 rev=0xd4
hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:28:4: class=0x060400 card=0x330d103c chip=0x8c188086 rev=0xd4
hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:28:5: class=0x060400 card=0x330d103c chip=0x8c1a8086 rev=0xd4
hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib6@pci0:0:28:6: class=0x060400 card=0x330d103c chip=0x8c1c8086 rev=0xd4
hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib7@pci0:0:28:7: class=0x060400 card=0x330d103c chip=0x8c1e8086 rev=0xd4
hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
ehci1@pci0:0:29:0: class=0x0c0320 card=0x330d103c chip=0x8c268086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family USB EHCI'
class = serial bus
subclass = USB
isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x8c528086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = 'C222 Series Chipset Family Server Essential SKU LPC
Controller'
class = bridge
subclass = PCI-ISA
ahci1@pci0:0:31:2: class=0x010601 card=0x330d103c chip=0x8c028086 rev=0x04
hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series/C220 Series Chipset Family 6-port SATA Controller 1
[AHCI mode]'
class = mass storage
subclass = SATA
xhci1@pci0:10:0:0: class=0x0c0330 card=0x34831106 chip=0x34831106 rev=0x01
hdr=0x00
vendor = 'VIA Technologies, Inc.'
device = 'VL805 USB 3.0 Host Controller'
class = serial bus
subclass = USB
bge0@pci0:3:0:0: class=0x020000 card=0x2133103c chip=0x165f14e4 rev=0x00
hdr=0x00
vendor = 'Broadcom Inc. and subsidiaries'
device = 'NetXtreme BCM5720 2-port Gigabit Ethernet PCIe'
class = network
subclass = ethernet
bge1@pci0:3:0:1: class=0x020000 card=0x2133103c chip=0x165f14e4 rev=0x00
hdr=0x00
vendor = 'Broadcom Inc. and subsidiaries'
device = 'NetXtreme BCM5720 2-port Gigabit Ethernet PCIe'
class = network
subclass = ethernet
ahci0@pci0:13:0:0: class=0x010601 card=0x10601b21 chip=0x06121b21 rev=0x02
hdr=0x00
vendor = 'ASMedia Technology Inc.'
device = 'ASM1062 Serial ATA Controller'
class = mass storage
subclass = SATA
none0@pci0:1:0:0: class=0x088000 card=0x3381103c chip=0x3306103c rev=0x05
hdr=0x00
vendor = 'Hewlett-Packard Company'
device = 'Integrated Lights-Out Standard Slave Instrumentation & System
Support'
class = base peripheral
vgapci0@pci0:1:0:1: class=0x030000 card=0x3381103c chip=0x0533102b rev=0x00
hdr=0x00
vendor = 'Matrox Electronics Systems Ltd.'
device = 'MGA G200EH'
class = display
subclass = VGA
none1@pci0:1:0:2: class=0x088000 card=0x3381103c chip=0x3307103c rev=0x05
hdr=0x00
vendor = 'Hewlett-Packard Company'
device = 'Integrated Lights-Out Standard Management Processor Support
and Messaging'
class = base peripheral
uhci0@pci0:1:0:4: class=0x0c0300 card=0x3381103c chip=0x3300103c rev=0x02
hdr=0x00
vendor = 'Hewlett-Packard Company'
device = 'Integrated Lights-Out Standard Virtual USB Controller'
class = serial bus
subclass = USB
The memstick is seen through ehci0.
$ dmesg | grep usb
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
usbus2 on xhci1
usbus2: 5.0Gbps Super Speed USB v3.0
usbus3 on uhci0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
ugen4.1: <Intel EHCI root HUB> at usbus4
ugen3.1: <HP UHCI root HUB> at usbus3
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <0x1106 XHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub2: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Root mount waiting for: usbus0 usbus1 usbus2 CAM usbus3 usbus4
uhub4: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.2: <vendor 0x2109 USB2.0 Hub> at usbus2
uhub5: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus2
ugen3.2: <HP Virtual Keyboard> at usbus3
ukbd0: <Virtual Keyboard > on usbus3
Root mount waiting for: usbus0 usbus1 usbus2 usbus4
ugen0.2: <JetFlash Mass Storage Device> at usbus0
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.41, addr 1> on
usbus0
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub6: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on
usbus1
ugen4.2: <vendor 0x8087 product 0x8000> at usbus4
uhub7: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on
usbus4
ugen2.3: <VIA Labs, Inc. USB2.0 Hub> at usbus2
uhub8: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.90, addr 2> on usbus2
Root mount waiting for: usbus2
ugen2.4: <C-Media Electronics Inc. USB Audio Device> at usbus2
uaudio0: <C-Media Electronics Inc. USB Audio Device, class 0/0, rev 1.10/1.00,
addr 3> on usbus2
Root mount waiting for: usbus2
ugen2.5: <VIA Labs, Inc. USB3.0 Hub> at usbus2
uhub9: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/90.91, addr 4> on usbus2
Root mount waiting for: usbus2
ums0: <Virtual Mouse> on usbus3
ugen0.2: <JetFlash Mass Storage Device> at usbus0 (disconnected)
ugen3.2: <HP Virtual Keyboard> at usbus3 (disconnected)
ugen0.2: <Kingston DataTraveler 2.0> at usbus0
umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on usbus0
vfs.usermount is left to its default value, ie. 0. (How could this affect the
loader behavior?)
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
freebsd-bugs@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "freebsd-bugs-unsubscr...@freebsd.org"
