https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=243225
Peter Eriksson <p...@lysator.liu.se> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |p...@lysator.liu.se
--- Comment #2 from Peter Eriksson <p...@lysator.liu.se> ---
Do you have X2APIC enabled in your R730? When I try to enable it on our
R730xd's with a similar setup (Dell HBA330 (mpr)) controllers it refuses to
boot and just gives me a loop of:
mpr0: Calling Reinit from mpr_wait_command, timeout=60, elapsed=60
mpr0: Reinitializing controller,
mpr0: Firmware: 16.00.08.00, Driver: 18.03.00.00-fbsd
mpr0: IOCCapabilities:
7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray>
FreeBSD 11.3-RELEASE-p6
Dell R730xd with 1 HBA330 Mini (mpr) and dual 10GE Intel X710 (ixl)
Switching back to X2APIC disabled allows the server to boot just fine.
(And some errors about USB too just for the fun of it...)
uhub1: 2 ports with 2 removable, self powered
uhub0: 21 ports with 21 removable, self powered
uhub2: 2 ports with 2 removable, self powered
usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 1 failed,
USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 1 failed,
USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 1 failed,
USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
ugen2.2: <Unknown > at usbus2 (disconnected)
uhub_reattach_port: could not allocate new device
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
ugen1.2: <Unknown > at usbus1 (disconnected)
uhub_reattach_port: could not allocate new device
usbd_setup_device_desc: getting device descriptor at addr 1 failed,
USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 1 failed,
USB_ERR_TIMEOUT
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
freebsd-bugs@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "freebsd-bugs-unsubscr...@freebsd.org"
