https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=237937
Bug ID: 237937
Summary: Removing path with mpr and geom_multipath causes
kernel panic
Product: Base System
Version: CURRENT
Hardware: amd64
OS: Any
Status: New
Severity: Affects Only Me
Priority: ---
Component: kern
Assignee: b...@freebsd.org
Reporter: pascal.guitier...@gmail.com
This issue occurs on both 12.0-RELEASE-p5 and 13-CURRENT r347415 (snap from
10th of May 2019).
Reproducing is very easy:
1. Setup a bunch of multipath SAS disks using gmultipath (I am using 100 SAS
disks with two 9300-8e SAS HBA's, but issue occurs even on 1x HBA)
2. Create a ZFS pool based on these (zpool create bench mirror multipath/..
...)
3. Run some I/O on the pool: iozone -a
4. Physically pull one of the paths, wait, plug back in. Confirm that the path
is OPTIMAL via gmultipath. Then repeat with the other port.
Eventually I/O will be frozen to the OS (there's a bunch of scsi ioc terminated
and CAM status: CCB request completed with an error) and eventually the system
will panic.
This is 100% reproducible on my setup, can also provide SSH/IPMI access if
needed.
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
freebsd-bugs@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "freebsd-bugs-unsubscr...@freebsd.org"
