https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=212991
Bug ID: 212991
Summary: FreeBSD-10.3-RELEASE-i386-memstick installer hangs at
Archive Extraction ports.txz
Product: Base System
Version: 10.3-RELEASE
Hardware: Any
OS: Any
Status: New
Severity: Affects Only Me
Priority: ---
Component: misc
Assignee: freebsd-bugs@FreeBSD.org
Reporter: dpchr...@holgerdanske.com
I have a computer:
Intel DQ67SWR motherboard
Intel Core i7-2600S processor
8 GB RAM
16 GB SSD
I downloaded:
CHECKSUM.SHA256-FreeBSD-10.3-RELEASE-i386
FreeBSD-10.3-RELEASE-i386-memstick.img.xz
I extracted the second and verified the checksum:
2016-09-25 13:23:53 dpchrist@cd2533 ~/Data/dpchrist/iso/freebsd/10.3
$ sha256sum -c CHECKSUM.SHA256-FreeBSD-10.3-RELEASE-i386 2> /dev/null | grep
i386-memstick.img
FreeBSD-10.3-RELEASE-i386-memstick.img: OK
FreeBSD-10.3-RELEASE-i386-memstick.img.xz: OK
I copied FreeBSD-10.3-RELEASE-i386-memstick.img to a USB flash drive:
2016-09-25 13:29:14 dpchrist@t7400 ~
$ lsusb -v -s 001:003
Bus 001 Device 003: ID 125f:c08a A-DATA Technology Co., Ltd.
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x125f A-DATA Technology Co., Ltd.
idProduct 0xc08a
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 480mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
I attempted to use the USB flash drive to install FreeBSD:
a. Power down.
b. Insert FreeBSD-10.3-RELEASE-i386-memstick.img USB stick into
rear USB 2 slot. Insert Samsung 16 GB SSD into upper docking
bay.
c. Power up.
d. Press F10 during post to bring up Boot Menu. Use cursor keys
to highlight USB device. Press Enter to boot. Ignore warning:
gptboot: backup GPT header checksum mismatch
e. At "FreeBSD - Welcome to FreeBSD" screen, cboose
1. Boot Multi User [Enter]
or wait for timeout.
f. At "FreeBSD Installer - Welcome" screen, choose:
Install
g. At "FreeBSD Installer - Keymap Selection" screen, choose:
Continue with default keymap
h. At "FreeBSD Installer - Set Hostname" screen, enter:
freebsd
i. At "FreeBSD Installer - Distribution Selection" screen, enable
the following selections:
doc
games
ports
src
j. At "FreeBSD Installer - Partitioning" screen, choose:
Auto (ZFS)
k. At "FreeBSD Installer - ZFS Configuration" screen, configure as
follows:
Pool Type/Disks stripe: 1 disk
ada0
...
Pool Name zroot
Force 4K Sectors YES
Encrypt Disks YES
Partition Scheme MBR (BIOS)
Swap Size 2g
Mirror Swap NO
Encrypt Swap YES
Then choose "Install". Confirm destruction of contents of
ada0. Enter encryption passphrase.
l. Hangs on screen "FreeBSD Installer - Archive Extraction":
ports.txz 23%
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
freebsd-bugs@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "freebsd-bugs-unsubscr...@freebsd.org"
