https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=200993
--- Comment #5 from Alex P <alex.placen...@artemisracing.com> --- Also forgot to mention that camcontrol rescan brings back any detached drives (In reply to Phil Kulin from comment #4) # camcontrol identify /dev/da0 pass1: <TOSHIBA DT01ACA300 MX6OABB0> ATA-8 SATA 3.x device camcontrol: get_cpi: error sending Path Inquiry CCB: Device not configured protocol ATA/ATAPI-8 SATA 3.x device model TOSHIBA DT01ACA300 firmware revision MX6OABB0 serial number Z46Z2NUGS WWN 5000039ff4e9dc2b cylinders 16383 heads 16 sectors/track 63 sector size logical 512, physical 4096, offset 0 LBA supported 268435455 sectors LBA48 supported 5860533168 sectors PIO supported PIO4 DMA supported WDMA2 UDMA6 media RPM 7200 Feature Support Enabled Value Vendor read ahead yes yes write cache yes yes flush cache yes yes overlap no Tagged Command Queuing (TCQ) no no Native Command Queuing (NCQ) yes 32 tags NCQ Queue Management no NCQ Streaming no Receive & Send FPDMA Queued no SMART yes yes microcode download yes yes security yes no power management yes yes advanced power management yes no 0/0x00 automatic acoustic management no no media status notification no no power-up in Standby yes no write-read-verify no no unload no no general purpose logging yes yes free-fall no no Data Set Management (DSM/TRIM) no Host Protected Area (HPA) yes no 5860533168/1 HPA - Security no -- You are receiving this mail because: You are the assignee for the bug. _______________________________________________ freebsd-bugs@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-bugs To unsubscribe, send any mail to "freebsd-bugs-unsubscr...@freebsd.org"
