The following reply was made to PR kern/115152; it has been noted by GNATS.
From: Ted Mittelstaedt <t...@ipinc.net>
To: bug-follo...@freebsd.org
Cc:
Subject: Re: kern/115152: [ata] Sil 3512 SATA controller panics on 6.2
Date: Wed, 07 Jul 2010 12:20:22 -0700
We have the same general problem with this controller
under FreeBSD 8.0. We get numerous
TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=XXXXXXX
on the system with moderate to heavy load on the controller,
and eventually the system locks up. Interestingly, the
problem didn't happen with OLDer SATA150 disks plugged into
the controller, but 150GB hard drives aren't that useable
nowadays.
There's been numerous postings on the mailing list about
these controllers. Linux does not appear to have difficulty
with them so people seem to move these systems to Linux servers.
Here's the dmesg from our system, the system has since been
rehomed to Linux:
nas1# dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009
r...@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (937.55-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1073741824 (1024 MB)
avail memory = 1036361728 (988 MB)
ACPI APIC Table: <ASUS CUV4X-D >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
cpu0 (BSP): APIC ID: 3
cpu1 (AP): APIC ID: 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ASUS CUV4X-D> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> on hostb0
agp0: aperture size is 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem
0xf8000000-0xfbffffff,0xf6000000-0xf6003fff irq 16 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb800-0xb80f at device 4.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 5 at device
4.2 on pci0
uhci0: [ITHREAD]
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 5 at device
4.3 on pci0
uhci1: [ITHREAD]
usbus1: <VIA 83C572 USB controller> on uhci1
fxp0: <Intel 82557 Pro/100 Ethernet> port 0xa800-0xa81f mem
0xf7000000-0xf7000fff,0xf5800000-0xf58fffff at device 10.0 on pci0
fxp0: Enabling Rx lock-up workaround
miibus0: <MII bus> on fxp0
nsphy0: <DP83840 10/100 media interface> PHY 1 on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:39:0f:cc
fxp0: [ITHREAD]
atapci1: <SiI 3512 SATA150 controller> port
0xa400-0xa407,0xa000-0xa003,0x9800-0x9807,0x9400-0x9403,0x9000-0x900f
mem 0xf5000000-0xf50001ff irq 17 at device 11.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
sym0: <810a> port 0x8800-0x88ff mem 0xf4800000-0xf48000ff irq 16 at
device 12.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcc000-0xd0fff pnpid
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
acd0: CDROM <CRD-8322B/1.06> at ata1-master PIO4
ad4: 1907729MB <Hitachi HDS722020ALA330 JKAOA3EA> at ata2-master SATA150
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ad6: 1907729MB <Hitachi HDS722020ALA330 JKAOA3EA> at ata3-master SATA150
Waiting 5 seconds for SCSI devices to settle
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
(probe6:sym0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe6:sym0:0:6:0): CAM Status: SCSI Status Error
(probe6:sym0:0:6:0): SCSI Status: Check Condition
(probe6:sym0:0:6:0): UNIT ATTENTION asc:29,0
(probe6:sym0:0:6:0): Power on, reset, or bus device reset occurred
(probe6:sym0:0:6:0): Retrying Command (per Sense Data)
(probe6:sym0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe6:sym0:0:6:0): CAM Status: SCSI Status Error
(probe6:sym0:0:6:0): SCSI Status: Check Condition
(probe6:sym0:0:6:0): NOT READY asc:3a,0
(probe6:sym0:0:6:0): Medium not present
(probe6:sym0:0:6:0): Unretryable error
sa0 at sym0 bus 0 target 6 lun 0
sa0: <HP C1553A 9503> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
sa1 at sym0 bus 0 target 6 lun 1
sa1: <HP C1553A 9503> Removable Sequential Access SCSI-2 device
sa1: 10.000MB/s transfers (10.000MHz, offset 8)
ar0: 1907729MB <FreeBSD PseudoRAID RAID1> status: DEGRADED
ar0: disk0 DOWN no device found for this subdisk
ar0: disk1 READY (mirror) using ad4 at ata2-master
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ar0s1a
ad6: inserted into ar0 disk0 as spare
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=753183
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=753183
ad4: TIMEOUT - WRITE_DMA retrying (0 retries left) LBA=753183
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=773599
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=753183
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=753183
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=752839
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=752839
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=287
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=10953023
ad4: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=752839
_______________________________________________
freebsd-bugs@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "freebsd-bugs-unsubscr...@freebsd.org"
