>Number:         144898
>Category:       kern
>Synopsis:       wpi panics system
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sat Mar 20 08:50:03 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator:     Dominic Fandrey
>Release:        RELENG_8
>Organization:
private
>Environment:
FreeBSD mobileKamikaze.norad 8.0-STABLE FreeBSD 8.0-STABLE #0: Thu Mar 18 
22:46:18 CET 2010     
r...@mobilekamikaze.norad:/usr/obj/HP6510b-8/amd64/usr/src/sys/HP6510b-8  amd64
>Description:
A couple of days ago I upgraded my notebook from 2gb to 8gb ram. Ever since my 
wpi wireless works very unreliable. An established connection just disappears 
suddenly often after only a couple of minutes (the wireles LED turns itself 
off). Afterwards it's no longer possible to find wireless networks. Scans 
always return nothing.

This is not the worst, though. It also panics the system quite often (I'm using 
a really slow GSM connection, to avoid the panics). I.e. the system freezes 
without creating a dump.

Once I happened to be looking at the error console and pressed the radio 
button. This is what I recorded (using pen and paper):

wpi0: Hardware Switch Enabled
wpi0: could not set power mode
wpi0: device config failed
kernel trap 12 with interrupts disabled


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address   = 0x20
fault code              = supervisor read data, page not present
instruction pointer     = 0x20:0xffffffff802501ab
stack pointer           = 0x28:0xffffff80e7c01b70
frame pointer           = 0x28:0xffffff80e7c01ba0
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = resume, IOPL = 0
current process         = 0 (wpi0 taskq)
trap number             = 12
panic: page fault
cpuid = 1



As I said, the system doesn't dump, no idea why. This is an HP Compag 6510b, 
Intel Core2Duo, 8gb memory.

pciconf -lv:
hos...@pci0:0:0:0:      class=0x060000 card=0x30c0103c chip=0x2a008086 rev=0x0c 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
vgap...@pci0:0:2:0:     class=0x030000 card=0x30c0103c chip=0x2a028086 rev=0x0c 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 965 Express Integrated Graphics Controller'
    class      = display
    subclass   = VGA
vgap...@pci0:0:2:1:     class=0x038000 card=0x30c0103c chip=0x2a038086 rev=0x0c 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 965 Express Integrated Graphics Controller'
    class      = display
uh...@pci0:0:26:0:      class=0x0c0300 card=0x30c0103c chip=0x28348086 rev=0x03 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI *4'
    class      = serial bus
    subclass   = USB
uh...@pci0:0:26:1:      class=0x0c0300 card=0x30c0103c chip=0x28358086 rev=0x03 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI *5'
    class      = serial bus
    subclass   = USB
eh...@pci0:0:26:7:      class=0x0c0320 card=0x30c0103c chip=0x283a8086 rev=0x03 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'ICH8 Enhanced USB2 Enhanced Host Controller (81EC1043 (?))'
    class      = serial bus
    subclass   = USB
hd...@pci0:0:27:0:      class=0x040300 card=0x30c0103c chip=0x284b8086 rev=0x03 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Intel audio controller embedded with the 82801H chipset ( 
ICH8 chipset ) (82801H)'
    class      = multimedia
    subclass   = HDA
pc...@pci0:0:28:0:      class=0x060400 card=0x30c0103c chip=0x283f8086 rev=0x03 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 1'
    class      = bridge
    subclass   = PCI-PCI
pc...@pci0:0:28:1:      class=0x060400 card=0x30c0103c chip=0x28418086 rev=0x03 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 2'
    class      = bridge
    subclass   = PCI-PCI
pc...@pci0:0:28:2:      class=0x060400 card=0x30c0103c chip=0x28438086 rev=0x03 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 3'
    class      = bridge
    subclass   = PCI-PCI
pc...@pci0:0:28:4:      class=0x060400 card=0x30c0103c chip=0x28478086 rev=0x03 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCIe Port 5'
    class      = bridge
    subclass   = PCI-PCI
uh...@pci0:0:29:0:      class=0x0c0300 card=0x30c0103c chip=0x28308086 rev=0x03 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI *1'
    class      = serial bus
    subclass   = USB
uh...@pci0:0:29:1:      class=0x0c0300 card=0x30c0103c chip=0x28318086 rev=0x03 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI *2'
    class      = serial bus
    subclass   = USB
uh...@pci0:0:29:2:      class=0x0c0300 card=0x30c0103c chip=0x28328086 rev=0x03 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI *3'
    class      = serial bus
    subclass   = USB
eh...@pci0:0:29:7:      class=0x0c0320 card=0x30c0103c chip=0x28368086 rev=0x03 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB2 EHCI *1'
    class      = serial bus
    subclass   = USB
pc...@pci0:0:30:0:      class=0x060401 card=0x30c0103c chip=0x24488086 rev=0xf3 
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI 
Bridge'
    class      = bridge
    subclass   = PCI-PCI
is...@pci0:0:31:0:      class=0x060100 card=0x30c0103c chip=0x28158086 rev=0x03 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801HEM (ICH8M-E) LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
atap...@pci0:0:31:1:    class=0x01018a card=0x30c0103c chip=0x28508086 rev=0x03 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) Ultra ATA Storage Controllers'
    class      = mass storage
    subclass   = ATA
ah...@pci0:0:31:2:      class=0x010601 card=0x30c0103c chip=0x28298086 rev=0x03 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
w...@pci0:16:0:0:       class=0x028000 card=0x135c103c chip=0x42228086 rev=0x02 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Intel 3945ABG Wireless LAN controller (10208086)'
    class      = network
b...@pci0:24:0:0:       class=0x020000 card=0x30c0103c chip=0x169314e4 rev=0x02 
hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'Ethernet Controller Broadcom Netlink Gigabit (BCM5787A)'
    class      = network
    subclass   = ethernet
no...@pci0:2:4:0:       class=0x060700 card=0x30c0103c chip=0x04761180 rev=0xb6 
hdr=0x02
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'Ricoh R/RL/5C476(II) (unknown)'
    class      = bridge
    subclass   = PCI-CardBus



dmesg |grep wpi:
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xe4100000-0xe4100fff irq 17 at 
device 0.0 on pci16
wpi0: Driver Revision 20071127
wpi0: Hardware Revision (0x1)
wpi0: Regulatory Domain: MoW2
wpi0: Hardware Type: B
wpi0: Hardware Revision: ?
wpi0: SKU does support 802.11a
wpi0: [ITHREAD]

>How-To-Repeat:
Use wpi wireless on an amd64 system with 8gb ram. If you use wpa_supplicant it 
panics more frequently.
>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted:
_______________________________________________
freebsd-bugs@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-bugs
To unsubscribe, send any mail to "freebsd-bugs-unsubscr...@freebsd.org"

Reply via email to