The following reply was made to PR amd64/180018; it has been noted by GNATS.

From: Alan Amesbury <[email protected]>
To: [email protected]
Cc:  
Subject: Re: amd64/180018: System panics when bsnmpd is started
Date: Tue, 02 Jul 2013 12:27:34 -0500

 This is a multi-part message in MIME format.
 --------------080902050705040901050908
 Content-Type: text/plain; charset=ISO-8859-1
 Content-Transfer-Encoding: 7bit
 
 The kernel config is derived from GENERIC and is attached
 (OITSEC-9.text).  A copy of /var/run/dmesg.boot is also attached
 (dmesg_boot.text).
 
 Please let me know if additional diagnostic information is needed.
 
 
 -- 
 Alan Amesbury
 University Information Security
 University of Minnesota
 
 --------------080902050705040901050908
 Content-Type: text/plain; charset=us-ascii;
  name="OITSEC-9.text"
 Content-Transfer-Encoding: 7bit
 Content-Disposition: attachment;
  filename="OITSEC-9.text"
 
 # $Id: OITSEC-9,v 1.3 2012/06/15 00:03:34 amesbury Exp $
 
 # This kernel configuration is largely a stripped down GENERIC with a
 # couple additional features tacked on at the end.
 
 # Identify this kernel and pull in GENERIC
 include                "GENERIC"
 ident          OITSEC-9
 
 # Turn off built-in-the-kernel support for these devices
 nodevice               adv
 nodevice               adw
 nodevice               ae
 nodevice               age
 nodevice               ahd
 nodevice               aic
 nodevice               alc
 nodevice               ale
 nodevice               amd
 nodevice               an
 nodevice               arcmsr
 nodevice               atapifd
 nodevice               atapist
 nodevice               ath
 nodevice               ath_hal
 nodevice               ath_pci
 nodevice               ath_rate_sample
 nodevice               aue
 nodevice               axe
 nodevice               bt
 nodevice               cardbus
 nodevice               cbb
 nodevice               cdce
 nodevice               ciss
 nodevice               cs
 nodevice               cue
 nodevice               dc
 nodevice               dcons
 nodevice               dcons_crom
 nodevice               de
 nodevice               dpt
 nodevice               ed
 nodevice               ep
 nodevice               et
 nodevice               ex
 nodevice               fdc
 nodevice               fe
 nodevice               firewire
 nodevice               fwe
 nodevice               fwip
 nodevice               hptiop
 nodevice               hptmv
 nodevice               hptrr
 nodevice               ida
 nodevice               iir
 nodevice               ips
 nodevice               ipw
 nodevice               isp
 nodevice               iwi
 nodevice               iwn
 nodevice               ixgbe
 nodevice               jme
 nodevice               kue
 nodevice               le
 nodevice               lge
 nodevice               lpt
 nodevice               malo
 nodevice               mlx
 nodevice               mly
 nodevice               msk
 nodevice               mwl
 nodevice               nfe
 nodevice               nge
 nodevice               pccard
 nodevice               pcn
 nodevice               plip
 nodevice               ppbus
 nodevice               ppc
 nodevice               ppi
 nodevice               puc
 nodevice               ral
 nodevice               rue
 nodevice               rum
 nodevice               run
 nodevice               sf
 nodevice               sis
 nodevice               sk
 nodevice               sn
 nodevice               snd_cmi
 nodevice               snd_csa
 nodevice               snd_emu10kx
 nodevice               snd_es137x
 nodevice               snd_hda
 nodevice               snd_ich
 nodevice               snd_uaudio
 nodevice               snd_via8233
 nodevice               sound
 nodevice               ste
 nodevice               stge
 nodevice               sym
 nodevice               ti
 nodevice               tl
 nodevice               trm
 nodevice               twa
 nodevice               twe
 nodevice               tx
 nodevice               txp
 nodevice               u3g
 nodevice               uark
 nodevice               uath
 nodevice               ubsa
 nodevice               udav
 nodevice               uftdi
 nodevice               uipaq
 nodevice               upgt
 nodevice               ural
 nodevice               urio
 nodevice               urtw
 nodevice               uslcom
 nodevice               uvisor
 nodevice               uvscom
 nodevice               vge
 nodevice               vr
 nodevice               vx
 nodevice               wb
 nodevice               wi
 nodevice               wlan
 nodevice               wlan_amrr
 nodevice               wlan_ccmp
 nodevice               wlan_tkip
 nodevice               wlan_wep
 nodevice               wpi
 nodevice               xe
 nodevice               zyd
 
 # Turn off these options
 nooptions              AHD_REG_PRETTY_PRINT
 nooptions              AH_SUPPORT_AR5416
 nooptions              COMPAT_FREEBSD4
 nooptions              COMPAT_FREEBSD5
 nooptions              COMPAT_FREEBSD6
 nooptions              COMPAT_FREEBSD7
 nooptions              COMPAT_IA32
 nooptions              IEEE80211_AMPDU_AGE
 nooptions              IEEE80211_DEBUG
 nooptions              IEEE80211_SUPPORT_MESH
 nooptions              MD_ROOT
 nooptions              NFS_ROOT
 
 # Add support for these devices and options
 options                        ALTQ
 options                        ALTQ_CBQ
 options                        ALTQ_RED
 options                        ALTQ_HFSC
 options                        DEVICE_POLLING
 options                        IPSEC
 options                        ZERO_COPY_SOCKETS
 options                        SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK)
 options                        SC_KERNEL_CONS_REV_ATTR=(FG_YELLOW|BG_RED)
 options                        SC_HISTORY_SIZE=1000
 
 device                 cpuctl
 device                 crypto
 device                 enc
 device                 pf
 device                 pflog
 device                 pfsync
 device                 carp
 
 --------------080902050705040901050908
 Content-Type: text/plain; charset=us-ascii;
  name="dmesg_boot.text"
 Content-Transfer-Encoding: 7bit
 Content-Disposition: attachment;
  filename="dmesg_boot.text"
 
 Copyright (c) 1992-2012 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 9.1-RELEASE-p4 #3: Wed Jun 26 15:47:13 CDT 2013
     [email protected]:/usr/obj/usr/src/sys/OITSEC-9 amd64
 CPU: Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz (2200.05-MHz K8-class CPU)
   Origin = "GenuineIntel"  Id = 0x206d7  Family = 6  Model = 2d  Stepping = 7
   
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   
Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant, performance statistics
 real memory  = 34359738368 (32768 MB)
 avail memory = 33058316288 (31526 MB)
 Event timer "LAPIC" quality 600
 ACPI APIC Table: <DELL   PE_SC3  >
 FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
 FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 SMT threads
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
  cpu2 (AP): APIC ID:  2
  cpu3 (AP): APIC ID:  3
  cpu4 (AP): APIC ID:  4
  cpu5 (AP): APIC ID:  5
  cpu6 (AP): APIC ID:  6
  cpu7 (AP): APIC ID:  7
  cpu8 (AP): APIC ID:  8
  cpu9 (AP): APIC ID:  9
  cpu10 (AP): APIC ID: 10
  cpu11 (AP): APIC ID: 11
  cpu12 (AP): APIC ID: 12
  cpu13 (AP): APIC ID: 13
  cpu14 (AP): APIC ID: 14
  cpu15 (AP): APIC ID: 15
  cpu16 (AP): APIC ID: 32
  cpu17 (AP): APIC ID: 33
  cpu18 (AP): APIC ID: 34
  cpu19 (AP): APIC ID: 35
  cpu20 (AP): APIC ID: 36
  cpu21 (AP): APIC ID: 37
  cpu22 (AP): APIC ID: 38
  cpu23 (AP): APIC ID: 39
  cpu24 (AP): APIC ID: 40
  cpu25 (AP): APIC ID: 41
  cpu26 (AP): APIC ID: 42
  cpu27 (AP): APIC ID: 43
  cpu28 (AP): APIC ID: 44
  cpu29 (AP): APIC ID: 45
  cpu30 (AP): APIC ID: 46
  cpu31 (AP): APIC ID: 47
 ioapic1: Changing APIC ID to 1
 ioapic2: Changing APIC ID to 2
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 ioapic1 <Version 2.0> irqs 32-55 on motherboard
 ioapic2 <Version 2.0> irqs 64-87 on motherboard
 kbd1 at kbdmux0
 cryptosoft0: <software crypto> on motherboard
 aesni0: <AES-CBC,AES-XTS> on motherboard
 acpi0: <DELL PE_SC3> on motherboard
 acpi0: Power Button (fixed)
 cpu0: <ACPI CPU> on acpi0
 cpu1: <ACPI CPU> on acpi0
 cpu2: <ACPI CPU> on acpi0
 cpu3: <ACPI CPU> on acpi0
 cpu4: <ACPI CPU> on acpi0
 cpu5: <ACPI CPU> on acpi0
 cpu6: <ACPI CPU> on acpi0
 cpu7: <ACPI CPU> on acpi0
 cpu8: <ACPI CPU> on acpi0
 cpu9: <ACPI CPU> on acpi0
 cpu10: <ACPI CPU> on acpi0
 cpu11: <ACPI CPU> on acpi0
 cpu12: <ACPI CPU> on acpi0
 cpu13: <ACPI CPU> on acpi0
 cpu14: <ACPI CPU> on acpi0
 cpu15: <ACPI CPU> on acpi0
 cpu16: <ACPI CPU> on acpi0
 cpu17: <ACPI CPU> on acpi0
 cpu18: <ACPI CPU> on acpi0
 cpu19: <ACPI CPU> on acpi0
 cpu20: <ACPI CPU> on acpi0
 cpu21: <ACPI CPU> on acpi0
 cpu22: <ACPI CPU> on acpi0
 cpu23: <ACPI CPU> on acpi0
 cpu24: <ACPI CPU> on acpi0
 cpu25: <ACPI CPU> on acpi0
 cpu26: <ACPI CPU> on acpi0
 cpu27: <ACPI CPU> on acpi0
 cpu28: <ACPI CPU> on acpi0
 cpu29: <ACPI CPU> on acpi0
 cpu30: <ACPI CPU> on acpi0
 cpu31: <ACPI CPU> on acpi0
 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
 Event timer "RTC" frequency 32768 Hz quality 0
 attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
 Timecounter "i8254" frequency 1193182 Hz quality 0
 Event timer "i8254" frequency 1193182 Hz quality 100
 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
 Timecounter "HPET" frequency 14318180 Hz quality 950
 Event timer "HPET" frequency 14318180 Hz quality 450
 Event timer "HPET1" frequency 14318180 Hz quality 440
 Event timer "HPET2" frequency 14318180 Hz quality 440
 Event timer "HPET3" frequency 14318180 Hz quality 440
 Event timer "HPET4" frequency 14318180 Hz quality 440
 Event timer "HPET5" frequency 14318180 Hz quality 440
 Event timer "HPET6" frequency 14318180 Hz quality 440
 Event timer "HPET7" frequency 14318180 Hz quality 440
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 igb0: <Intel(R) PRO/1000 Network Connection version - 2.3.4> port 
0xfc80-0xfc9f mem 0xdcb00000-0xdcbfffff,0xdcff0000-0xdcff3fff irq 38 at device 
0.0 on pci1
 igb0: Using MSIX interrupts with 9 vectors
 igb0: Ethernet address: bc:30:5b:ed:fa:90
 igb0: Bound queue 0 to cpu 0
 igb0: Bound queue 1 to cpu 1
 igb0: Bound queue 2 to cpu 2
 igb0: Bound queue 3 to cpu 3
 igb0: Bound queue 4 to cpu 4
 igb0: Bound queue 5 to cpu 5
 igb0: Bound queue 6 to cpu 6
 igb0: Bound queue 7 to cpu 7
 igb1: <Intel(R) PRO/1000 Network Connection version - 2.3.4> port 
0xfca0-0xfcbf mem 0xdcc00000-0xdccfffff,0xdcff4000-0xdcff7fff irq 37 at device 
0.1 on pci1
 igb1: Using MSIX interrupts with 9 vectors
 igb1: Ethernet address: bc:30:5b:ed:fa:91
 igb1: Bound queue 0 to cpu 8
 igb1: Bound queue 1 to cpu 9
 igb1: Bound queue 2 to cpu 10
 igb1: Bound queue 3 to cpu 11
 igb1: Bound queue 4 to cpu 12
 igb1: Bound queue 5 to cpu 13
 igb1: Bound queue 6 to cpu 14
 igb1: Bound queue 7 to cpu 15
 igb2: <Intel(R) PRO/1000 Network Connection version - 2.3.4> port 
0xfcc0-0xfcdf mem 0xdcd00000-0xdcdfffff,0xdcff8000-0xdcffbfff irq 36 at device 
0.2 on pci1
 igb2: Using MSIX interrupts with 9 vectors
 igb2: Ethernet address: bc:30:5b:ed:fa:92
 igb2: Bound queue 0 to cpu 16
 igb2: Bound queue 1 to cpu 17
 igb2: Bound queue 2 to cpu 18
 igb2: Bound queue 3 to cpu 19
 igb2: Bound queue 4 to cpu 20
 igb2: Bound queue 5 to cpu 21
 igb2: Bound queue 6 to cpu 22
 igb2: Bound queue 7 to cpu 23
 igb3: <Intel(R) PRO/1000 Network Connection version - 2.3.4> port 
0xfce0-0xfcff mem 0xdce00000-0xdcefffff,0xdcffc000-0xdcffffff irq 34 at device 
0.3 on pci1
 igb3: Using MSIX interrupts with 9 vectors
 igb3: Ethernet address: bc:30:5b:ed:fa:93
 igb3: Bound queue 0 to cpu 24
 igb3: Bound queue 1 to cpu 25
 igb3: Bound queue 2 to cpu 26
 igb3: Bound queue 3 to cpu 27
 igb3: Bound queue 4 to cpu 28
 igb3: Bound queue 5 to cpu 29
 igb3: Bound queue 6 to cpu 30
 igb3: Bound queue 7 to cpu 31
 pcib2: <ACPI PCI-PCI bridge> irq 53 at device 2.0 on pci0
 pci3: <ACPI PCI bus> on pcib2
 pcib3: <ACPI PCI-PCI bridge> irq 53 at device 2.2 on pci0
 pci2: <ACPI PCI bus> on pcib3
 mfi0: <Dell PERC H710 Mini (monolithics)> port 0xec00-0xecff mem 
0xddffc000-0xddffffff,0xddf80000-0xddfbffff irq 42 at device 0.0 on pci2
 mfi0: Using MSI
 mfi0: Megaraid SAS driver Ver 4.23 
 mfi0: MaxCmd = 3f0 MaxSgl = 46 state = b73c03f0 
 pcib4: <ACPI PCI-PCI bridge> irq 53 at device 3.0 on pci0
 pci4: <ACPI PCI bus> on pcib4
 pci0: <base peripheral> at device 5.0 (no driver attached)
 pci0: <base peripheral> at device 5.2 (no driver attached)
 pcib5: <PCI-PCI bridge> irq 16 at device 17.0 on pci0
 pci5: <PCI bus> on pcib5
 pci0: <simple comms> at device 22.0 (no driver attached)
 pci0: <simple comms> at device 22.1 (no driver attached)
 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdf8fd000-0xdf8fd3ff irq 23 at 
device 26.0 on pci0
 usbus0: EHCI version 1.0
 usbus0 on ehci0
 pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0
 device_attach: pcib6 attach returned 6
 pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
 pci7: <ACPI PCI bus> on pcib6
 pcib7: <PCI-PCI bridge> at device 0.0 on pci7
 pci8: <PCI bus> on pcib7
 pcib8: <PCI-PCI bridge> at device 0.0 on pci8
 pci9: <PCI bus> on pcib8
 pcib9: <PCI-PCI bridge> at device 0.0 on pci9
 pci10: <PCI bus> on pcib9
 vgapci0: <VGA-compatible display> mem 
0xd8000000-0xd8ffffff,0xdeffc000-0xdeffffff,0xde000000-0xde7fffff irq 19 at 
device 0.0 on pci10
 pcib10: <PCI-PCI bridge> at device 1.0 on pci8
 pci11: <PCI bus> on pcib10
 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xdf8fe000-0xdf8fe3ff irq 22 at 
device 29.0 on pci0
 usbus1: EHCI version 1.0
 usbus1 on ehci1
 pcib11: <PCI-PCI bridge> at device 30.0 on pci0
 pci12: <PCI bus> on pcib11
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 ahci0: <Intel Patsburg AHCI SATA controller> port 
0xdce8-0xdcef,0xdcf8-0xdcfb,0xdcf0-0xdcf7,0xdcfc-0xdcff,0xdcc0-0xdcdf mem 
0xdf8ff000-0xdf8ff7ff irq 20 at device 31.2 on pci0
 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
 ahcich0: <AHCI channel> at channel 0 on ahci0
 ahcich1: <AHCI channel> at channel 1 on ahci0
 ahcich2: <AHCI channel> at channel 2 on ahci0
 ahcich3: <AHCI channel> at channel 3 on ahci0
 ahcich4: <AHCI channel> at channel 4 on ahci0
 ahcich5: <AHCI channel> at channel 5 on ahci0
 pcib12: <ACPI Host-PCI bridge> on acpi0
 pci64: <ACPI PCI bus> on pcib12
 pcib13: <ACPI PCI-PCI bridge> irq 85 at device 1.0 on pci64
 pci65: <ACPI PCI bus> on pcib13
 pcib14: <ACPI PCI-PCI bridge> irq 85 at device 3.0 on pci64
 pci66: <ACPI PCI bus> on pcib14
 pci64: <base peripheral> at device 5.0 (no driver attached)
 pci64: <base peripheral> at device 5.2 (no driver attached)
 pcib15: <ACPI Host-PCI bridge> on acpi0
 pci63: <ACPI PCI bus> on pcib15
 pci63: <base peripheral> at device 8.0 (no driver attached)
 pci63: <base peripheral> at device 9.0 (no driver attached)
 pci63: <base peripheral> at device 10.0 (no driver attached)
 pci63: <base peripheral> at device 10.1 (no driver attached)
 pci63: <base peripheral> at device 10.2 (no driver attached)
 pci63: <base peripheral> at device 10.3 (no driver attached)
 pci63: <base peripheral> at device 11.0 (no driver attached)
 pci63: <base peripheral> at device 11.3 (no driver attached)
 pci63: <base peripheral> at device 12.0 (no driver attached)
 pci63: <base peripheral> at device 12.1 (no driver attached)
 pci63: <base peripheral> at device 12.2 (no driver attached)
 pci63: <base peripheral> at device 12.3 (no driver attached)
 pci63: <base peripheral> at device 12.6 (no driver attached)
 pci63: <base peripheral> at device 12.7 (no driver attached)
 pci63: <base peripheral> at device 13.0 (no driver attached)
 pci63: <base peripheral> at device 13.1 (no driver attached)
 pci63: <base peripheral> at device 13.2 (no driver attached)
 pci63: <base peripheral> at device 13.3 (no driver attached)
 pci63: <base peripheral> at device 13.6 (no driver attached)
 pci63: <base peripheral> at device 14.0 (no driver attached)
 pci63: <dasp> at device 14.1 (no driver attached)
 pci63: <base peripheral> at device 15.0 (no driver attached)
 pci63: <base peripheral> at device 15.1 (no driver attached)
 pci63: <base peripheral> at device 15.2 (no driver attached)
 pci63: <base peripheral> at device 15.3 (no driver attached)
 pci63: <base peripheral> at device 15.4 (no driver attached)
 pci63: <base peripheral> at device 15.5 (no driver attached)
 pci63: <base peripheral> at device 15.6 (no driver attached)
 pci63: <base peripheral> at device 16.0 (no driver attached)
 pci63: <base peripheral> at device 16.1 (no driver attached)
 pci63: <base peripheral> at device 16.2 (no driver attached)
 pci63: <base peripheral> at device 16.3 (no driver attached)
 pci63: <base peripheral> at device 16.4 (no driver attached)
 pci63: <base peripheral> at device 16.5 (no driver attached)
 pci63: <base peripheral> at device 16.6 (no driver attached)
 pci63: <base peripheral> at device 16.7 (no driver attached)
 pci63: <base peripheral> at device 17.0 (no driver attached)
 pci63: <base peripheral> at device 19.0 (no driver attached)
 pci63: <dasp> at device 19.1 (no driver attached)
 pci63: <dasp> at device 19.4 (no driver attached)
 pci63: <dasp> at device 19.5 (no driver attached)
 pci63: <base peripheral> at device 19.6 (no driver attached)
 pcib16: <ACPI Host-PCI bridge> on acpi0
 pci127: <ACPI PCI bus> on pcib16
 pci127: <base peripheral> at device 8.0 (no driver attached)
 pci127: <base peripheral> at device 9.0 (no driver attached)
 pci127: <base peripheral> at device 10.0 (no driver attached)
 pci127: <base peripheral> at device 10.1 (no driver attached)
 pci127: <base peripheral> at device 10.2 (no driver attached)
 pci127: <base peripheral> at device 10.3 (no driver attached)
 pci127: <base peripheral> at device 11.0 (no driver attached)
 pci127: <base peripheral> at device 11.3 (no driver attached)
 pci127: <base peripheral> at device 12.0 (no driver attached)
 pci127: <base peripheral> at device 12.1 (no driver attached)
 pci127: <base peripheral> at device 12.2 (no driver attached)
 pci127: <base peripheral> at device 12.3 (no driver attached)
 pci127: <base peripheral> at device 12.6 (no driver attached)
 pci127: <base peripheral> at device 12.7 (no driver attached)
 pci127: <base peripheral> at device 13.0 (no driver attached)
 pci127: <base peripheral> at device 13.1 (no driver attached)
 pci127: <base peripheral> at device 13.2 (no driver attached)
 pci127: <base peripheral> at device 13.3 (no driver attached)
 pci127: <base peripheral> at device 13.6 (no driver attached)
 pci127: <base peripheral> at device 14.0 (no driver attached)
 pci127: <dasp> at device 14.1 (no driver attached)
 pci127: <base peripheral> at device 15.0 (no driver attached)
 pci127: <base peripheral> at device 15.1 (no driver attached)
 pci127: <base peripheral> at device 15.2 (no driver attached)
 pci127: <base peripheral> at device 15.3 (no driver attached)
 pci127: <base peripheral> at device 15.4 (no driver attached)
 pci127: <base peripheral> at device 15.5 (no driver attached)
 pci127: <base peripheral> at device 15.6 (no driver attached)
 pci127: <base peripheral> at device 16.0 (no driver attached)
 pci127: <base peripheral> at device 16.1 (no driver attached)
 pci127: <base peripheral> at device 16.2 (no driver attached)
 pci127: <base peripheral> at device 16.3 (no driver attached)
 pci127: <base peripheral> at device 16.4 (no driver attached)
 pci127: <base peripheral> at device 16.5 (no driver attached)
 pci127: <base peripheral> at device 16.6 (no driver attached)
 pci127: <base peripheral> at device 16.7 (no driver attached)
 pci127: <base peripheral> at device 17.0 (no driver attached)
 pci127: <base peripheral> at device 19.0 (no driver attached)
 pci127: <dasp> at device 19.1 (no driver attached)
 pci127: <dasp> at device 19.4 (no driver attached)
 pci127: <dasp> at device 19.5 (no driver attached)
 pci127: <base peripheral> at device 19.6 (no driver attached)
 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 uart0: console (9600,n,8,1)
 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x100>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 ctl: CAM Target Layer loaded
 AcpiOsExecute: failed to enqueue task, consider increasing the 
debug.acpi.max_tasks tunable
 AcpiOsExecute: failed to enqueue task, consider increasing the 
debug.acpi.max_tasks tunable
 est0: <Enhanced SpeedStep Frequency Control> on cpu0
 p4tcc0: <CPU Frequency Thermal Control> on cpu0
 est1: <Enhanced SpeedStep Frequency Control> on cpu1
 p4tcc1: <CPU Frequency Thermal Control> on cpu1
 est2: <Enhanced SpeedStep Frequency Control> on cpu2
 p4tcc2: <CPU Frequency Thermal Control> on cpu2
 est3: <Enhanced SpeedStep Frequency Control> on cpu3
 p4tcc3: <CPU Frequency Thermal Control> on cpu3
 est4: <Enhanced SpeedStep Frequency Control> on cpu4
 p4tcc4: <CPU Frequency Thermal Control> on cpu4
 est5: <Enhanced SpeedStep Frequency Control> on cpu5
 p4tcc5: <CPU Frequency Thermal Control> on cpu5
 est6: <Enhanced SpeedStep Frequency Control> on cpu6
 p4tcc6: <CPU Frequency Thermal Control> on cpu6
 est7: <Enhanced SpeedStep Frequency Control> on cpu7
 p4tcc7: <CPU Frequency Thermal Control> on cpu7
 est8: <Enhanced SpeedStep Frequency Control> on cpu8
 p4tcc8: <CPU Frequency Thermal Control> on cpu8
 est9: <Enhanced SpeedStep Frequency Control> on cpu9
 p4tcc9: <CPU Frequency Thermal Control> on cpu9
 est10: <Enhanced SpeedStep Frequency Control> on cpu10
 p4tcc10: <CPU Frequency Thermal Control> on cpu10
 est11: <Enhanced SpeedStep Frequency Control> on cpu11
 p4tcc11: <CPU Frequency Thermal Control> on cpu11
 est12: <Enhanced SpeedStep Frequency Control> on cpu12
 p4tcc12: <CPU Frequency Thermal Control> on cpu12
 est13: <Enhanced SpeedStep Frequency Control> on cpu13
 p4tcc13: <CPU Frequency Thermal Control> on cpu13
 est14: <Enhanced SpeedStep Frequency Control> on cpu14
 p4tcc14: <CPU Frequency Thermal Control> on cpu14
 est15: <Enhanced SpeedStep Frequency Control> on cpu15
 p4tcc15: <CPU Frequency Thermal Control> on cpu15
 est16: <Enhanced SpeedStep Frequency Control> on cpu16
 p4tcc16: <CPU Frequency Thermal Control> on cpu16
 est17: <Enhanced SpeedStep Frequency Control> on cpu17
 p4tcc17: <CPU Frequency Thermal Control> on cpu17
 est18: <Enhanced SpeedStep Frequency Control> on cpu18
 p4tcc18: <CPU Frequency Thermal Control> on cpu18
 est19: <Enhanced SpeedStep Frequency Control> on cpu19
 p4tcc19: <CPU Frequency Thermal Control> on cpu19
 est20: <Enhanced SpeedStep Frequency Control> on cpu20
 p4tcc20: <CPU Frequency Thermal Control> on cpu20
 est21: <Enhanced SpeedStep Frequency Control> on cpu21
 p4tcc21: <CPU Frequency Thermal Control> on cpu21
 est22: <Enhanced SpeedStep Frequency Control> on cpu22
 p4tcc22: <CPU Frequency Thermal Control> on cpu22
 est23: <Enhanced SpeedStep Frequency Control> on cpu23
 p4tcc23: <CPU Frequency Thermal Control> on cpu23
 est24: <Enhanced SpeedStep Frequency Control> on cpu24
 p4tcc24: <CPU Frequency Thermal Control> on cpu24
 est25: <Enhanced SpeedStep Frequency Control> on cpu25
 p4tcc25: <CPU Frequency Thermal Control> on cpu25
 est26: <Enhanced SpeedStep Frequency Control> on cpu26
 p4tcc26: <CPU Frequency Thermal Control> on cpu26
 est27: <Enhanced SpeedStep Frequency Control> on cpu27
 p4tcc27: <CPU Frequency Thermal Control> on cpu27
 est28: <Enhanced SpeedStep Frequency Control> on cpu28
 p4tcc28: <CPU Frequency Thermal Control> on cpu28
 est29: <Enhanced SpeedStep Frequency Control> on cpu29
 p4tcc29: <CPU Frequency Thermal Control> on cpu29
 est30: <Enhanced SpeedStep Frequency Control> on cpu30
 p4tcc30: <CPU Frequency Thermal Control> on cpu30
 est31: <Enhanced SpeedStep Frequency Control> on cpu31
 p4tcc31: <CPU Frequency Thermal Control> on cpu31
 Timecounters tick every 1.000 msec
 IPsec: Initialized Security Association Processing.
 mfi0: 2588 (425607728s/0x0020/info) - Shutdown command received from host
 mfi0: 2589 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 
005b/1000/1f38/1028)
 mfi0: 2590 (boot + 4s/0x0020/info) - Firmware version 3.130.05-1462
 mfi0: 2591 (boot + 5s/0x0008/info) - Battery Present
 mfi0: 2592 (boot + 5s/0x0020/info) - Package version 21.0.1-0132
 mfi0: 2593 (boot + 5s/0x0020/info) - Board Revision A01
 mfi0: 2594 (boot + 19s/0x0004/info) - Enclosure PD 20(c None/p1) communication 
restored
 mfi0: 2595 (boot + 19s/0x0002/info) - Inserted: Encl PD 20
 mfi0: 2596 (boot + 19s/0x0002/info) - Inserted: PD 20(c None/p1) Info: 
enclPd=20, scsiType=d, portMap=00, sasAddr=5e4ae02097019d00,0000000000000000
 mfi0: 2597 (boot + 19s/0x0002/info) - Inserted: PD 00(e0x20/s0)
 mfi0: 2598 (boot + 19s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: 
enclPd=20, scsiType=0, portMap=05, sasAddr=5000cca0256d4259,0000000000000000
 mfi0: 2599 (boot + 19s/0x0002/info) - Inserted: PD 01(e0x20/s1)
 mfi0: 2600 (boot + 19s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: 
enclPd=20, scsiType=0, portMap=03, sasAddr=5000cca0256d34e5,0000000000000000
 mfi0: 2601 (boot + 19s/0x0002/info) - Inserted: PD 02(e0x20/s2)
 mfi0: 2602 (boot + 19s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: 
enclPd=20, scsiType=0, portMap=01, sasAddr=5000cca025677715,0000000000000000
 mfi0: 2603 (boot + 19s/0x0002/info) - Inserted: PD 03(e0x20/s3)
 mfi0: 2604 (boot + 19s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: 
enclPd=20, scsiType=0, portMap=02, sasAddr=5000cca025709649,0000000000000000
 mfi0: 2605 (boot + 19s/0x0002/info) - Inserted: PD 04(e0x20/s4)
 mfi0: 2606 (boot + 19s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: 
enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca0256e5eb5,0000000000000000
 mfi0: 2607 (boot + 19s/0x0002/info) - Inserted: PD 05(e0x20/s5)
 mfi0: 2608 (boot + 19s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: 
enclPd=20, scsiType=0, portMap=04, sasAddr=5000cca025704f3d,0000000000000000
 mfi0: 2609 (425607804s/0x0020/info) - Time established as 06/27/13  0:23:24; 
(51 seconds since power on)
 mfi0: 2610 (425607823s/0x0008/info) - Battery temperature is normal
 mfi0: 2611 (425607823s/0x0008/info) - Current capacity of the battery is above 
threshold
 mfi0: 2612 (425607919s/0x0020/info) - Host driver is loaded and operational
 mfi0: 2613 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 
005b/1000/1f38/1028)
 mfi0: 2614 (boot + 4s/0x0020/info) - Firmware version 3.130.05-1462
 mfi0: 2615 (boot + 5s/0x0008/info) - Battery Present
 mfi0: 2616 (boot + 5s/0x0020/info) - Package version 21.0.1-0132
 mfi0: 2617 (boot + 5s/0x0020/info) - Board Revision A01
 mfi0: 2618 (boot + 43s/0x0002/info) - Unexpected sense: Encl PD 20 Path 
5e4ae02097019d00, CDB: 1c 01 00 00 20 00, Sense: 6/29/00
 mfi0: 2619 (boot + 45s/0x0004/info) - Enclosure PD 20(c None/p1) communication 
restored
 mfi0: 2620 (boot + 45s/0x0002/info) - Inserted: Encl PD 20
 mfi0: 2621 (boot + 45s/0x0002/info) - Inserted: PD 20(c None/p1) Info: 
enclPd=20, scsiType=d, portMap=00, sasAddr=5e4ae02097019d00,0000000000000000
 mfi0: 2622 (boot + 45s/0x0002/info) - Inserted: PD 00(e0x20/s0)
 mfi0: 2623 (boot + 45s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: 
enclPd=20, scsiType=0, portMap=02, sasAddr=5000cca0256d4259,0000000000000000
 mfi0: 2624 (boot + 45s/0x0002/info) - Inserted: PD 01(e0x20/s1)
 mfi0: 2625 (boot + 45s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: 
enclPd=20, scsiType=0, portMap=03, sasAddr=5000cca0256d34e5,0000000000000000
 mfi0: 2626 (boot + 45s/0x0002/info) - Inserted: PD 02(e0x20/s2)
 mfi0: 2627 (boot + 45s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: 
enclPd=20, scsiType=0, portMap=04, sasAddr=5000cca025677715,0000000000000000
 mfi0: 2628 (boot + 45s/0x0002/info) - Inserted: PD 03(e0x20/s3)
 mfi0: 2629 (boot + 45s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: 
enclPd=20, scsiType=0, portMap=05, sasAddr=5000cca025709649,0000000000000000
 mfi0: 2630 (boot + 45s/0x0002/info) - Inserted: PD 04(e0x20/s4)
 mfi0: 2631 (boot + 45s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: 
enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca0256e5eb5,0000000000000000
 mfi0: 2632 (boot + 45s/0x0002/info) - Inserted: PD 05(e0x20/s5)
 mfi0: 2633 (boot + 45s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: 
enclPd=20, scsiType=0, portMap=01, sasAddr=5000cca025704f3d,0000000000000000
 mfi0: 2634 (425608464s/0x0020/info) - Time established as 06/27/13  0:34:24; 
(47 seconds since power on)
 mfi0: 2635 (425608487s/0x0008/info) - Battery temperature is normal
 mfi0: 2636 (425608487s/0x0008/info) - Current capacity of the battery is above 
threshold
 mfi0: 2637 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 
005b/1000/1f38/1028)
 mfi0: 2638 (boot + 4s/0x0020/info) - Firmware version 3.130.05-1462
 mfi0: 2639 (boot + 5s/0x0008/info) - Battery Present
 mfi0: 2640 (boot + 5s/0x0020/info) - Package version 21.0.1-0132
 mfi0: 2641 (boot + 5s/0x0020/info) - Board Revision A01
 mfi0: 2642 (boot + 43s/0x0002/info) - Unexpected sense: Encl PD 20 Path 
5e4ae02097019d00, CDB: 1c 01 00 00 20 00, Sense: 6/29/00
 mfi0: 2643 (boot + 45s/0x0004/info) - Enclosure PD 20(c None/p1) communication 
restored
 mfi0: 2644 (boot + 45s/0x0002/info) - Inserted: Encl PD 20
 usbus0: 480Mbps High Speed USB v2.0
 usbus1: 480Mbps High Speed USB v2.0
 ugen0.1: <Intel> at usbus0
 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
 ugen1.1: <Intel> at usbus1
 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
 mfid0 on mfi0
 mfid0: 856704MB (1754529792 sectors) RAID volume 'Host' is optimal
 mfi0: 2645 (boot + 45s/0x0002/info) - Inserted: PD 20(c None/p1) Info: 
enclPd=20, scsiType=d, portMap=00, sasAddr=5e4ae02097019d00,0000000000000000
 mfi0: 2646 (boot + 45s/0x0002/info) - Inserted: PD 00(e0x20/s0)
 mfi0: 2647 (boot + 45s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: 
enclPd=20, scsiType=0, portMap=05, sasAddr=5000cca0256d4259,0000000000000000
 mfi0: 2648 (boot + 45s/0x0002/info) - Inserted: PD 01(e0x20/s1)
 mfi0: 2649 (boot + 45s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: 
enclPd=20, scsiType=0, portMap=03, sasAddr=5000cca0256d34e5,0000000000000000
 mfi0: 2650 (boot + 45s/0x0002/info) - Inserted: PD 02(e0x20/s2)
 mfi0: 2651 (boot + 45s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: 
enclPd=20, scsiType=0, portMap=01, sasAddr=5000cca025677715,00uhub0: 2 ports 
with 2 removable, self powered
 00000000000000
 mfi0: 2652 (boot + 45s/0x0002/info) - Inserted: PD 03(e0x20/s3)
 mfi0: 2653 (boot + 45s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: 
enclPd=20, scsiType=0, portMap=02, sasAddr=5000cca025709649,00uhub1: 2 ports 
with 2 removable, self powered
 00000000000000
 mfi0: 2654 (boot + 45s/0x0002/info) - Inserted: PD 04(e0x20/s4)
 mfi0: 2655 (boot + 45s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: 
enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca0256e5eb5,0000000000000000
 mfi0: 2656 (boot + 45s/0x0002/info) - Inserted: PD 05(e0x20/s5)
 mfi0: 2657 (boot + 45s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: 
enclPd=20, scsiType=0, portMap=04, sasAddr=5000cca025704f3d,0000000000000000
 mfi0: 2658 (425608581s/0x0020/info) - Time established as 06/27/13  0:36:21; 
(51 seconds since power on)
 mfi0: 2659 (425608600s/0x0008/info) - Battery temperature is normal
 mfi0: 2660 (425608600s/0x0008/info) - Current capacity of the battery is above 
threshold
 mfi0: 2661 (425608747s/0x0020/info) - Host driver is loaded and operational
 AcpiOsExecute: failed to enqueue task, consider increasing the 
debug.acpi.max_tasks tunable
 ACPI Error: Method parse/execution failed [\\_SB_.PCI0.HEC2.HSCI] (Node 
0xfffffe000d7d0680), AE_NO_MEMORY (20110527/psparse-560)
 ugen0.2: <vendor 0x8087> at usbus0
 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on 
usbus0
 ACPI Error: Method parse/execution failed [\\_GPE._L24] (Node 
0xfffffe000d7dd5c0)ugen1.2: <vendor 0x8087> at usbus1
 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on 
usbus1
 , AE_NO_MEMORY (20110527/psparse-560)
 ACPI Exception: AE_NO_MEMORY, while evaluating GPE method [_L24] 
(20110527/evgpe-606)
 AcpiOsExecute: failed to enqueue task, consider increasing the 
debug.acpi.max_tasks tunable
 cd0 at ahcich4 bus 0 scbus4 target 0 lun 0
 SMP: AP CPU #31 Launched!
 SMP: AP CPU #1 Launched!
 cd0: <HL-DT-ST DVD+-RW GU40N A300> Removable CD-ROM SCSI-0 device 
 SMP: AP CPU #22 Launched!
 SMP: AP CPU #8 Launched!
 cd0: 150.000MB/s transfers (SMP: AP CPU #9 Launched!
 SATA 1.x, SMP: AP CPU #2 Launched!
 UDMA6, SMP: AP CPU #5 Launched!
 ATAPI 12bytes, SMP: AP CPU #27 Launched!
 PIO 8192bytes)
 cd0: Attempt to query device size failed: NOT READY, Medium not present - tray 
closed
 SMP: AP CPU #18 Launched!
 SMP: AP CPU #20 Launched!
 SMP: AP CPU #26 Launched!
 SMP: AP CPU #24 Launched!
 SMP: AP CPU #10 Launched!
 SMP: AP CPU #14 Launched!
 SMP: AP CPU #12 Launched!
 SMP: AP CPU #3 Launched!
 SMP: AP CPU #11 Launched!
 SMP: AP CPU #4 Launched!
 SMP: AP CPU #15 Launched!
 SMP: AP CPU #13 Launched!
 SMP: AP CPU #6 Launched!
 SMP: AP CPU #7 Launched!
 SMP: AP CPU #16 Launched!
 SMP: AP CPU #23 Launched!
 SMP: AP CPU #19 Launched!
 SMP: AP CPU #30 Launched!
 SMP: AP CPU #28 Launched!
 SMP: AP CPU #21 Launched!
 SMP: AP CPU #25 Launched!
 SMP: AP CPU #17 Launched!
 SMP: AP CPU #29 Launched!
 Timecounter "TSC-low" frequency 8593937 Hz quality 1000
 uhub2: 6 ports with 6 removable, self powered
 Root mount waiting for: usbus1 usbus0
 uhub3: 8 ports with 8 removable, self powered
 Root mount waiting for: usbus0
 ugen0.3: <Dell Computer Corp.> at usbus0
 umass0: <Dell Computer Corp. Internal Dual SD, class 0/0, rev 2.00/1.10, addr 
3> on usbus0
 umass0:  SCSI over Bulk-Only; quirks = 0x4100
 umass0:7:0:-1: Attached to scbus7
 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0 
 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
 (probe0:umass-sim0:0:0:0): SCSI status: Check Condition
 (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid 
command operation code)
 (probe0:umass-sim0:0:0:0): Error 22, Unretryable error
 da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
 da0: <Dell Internal Dual SD 1.:> Fixed Direct Access SCSI-5 device 
 da0: 40.000MB/s transfers
 da0: 972MB (1990656 512 byte sectors: 64H 32S/T 972C)
 Root mount waiting for: usbus0
 Root mount waiting for: usbus0
 ugen0.4: <vendor 0x13fe> at usbus0
 umass1: <vendor 0x13fe Patriot Memory, class 0/0, rev 2.10/1.00, addr 4> on 
usbus0
 umass1:  SCSI over Bulk-Only; quirks = 0x0100
 umass1:8:1:-1: Attached to scbus8
 da1 at umass-sim1 bus 1 scbus8 target 0 lun 0
 da1: < Patriot Memory PMAP> Removable Direct Access SCSI-4 device 
 da1: 40.000MB/s transfers
 da1: 30160MB (61767680 512 byte sectors: 255H 63S/T 3844C)
 Root mount waiting for: usbus0
 ugen0.5: <no manufacturer> at usbus0
 uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 5> on 
usbus0
 Root mount waiting for: usbus0
 uhub4: 6 ports with 6 removable, self powered
 ugen0.6: <Avocent> at usbus0
 ukbd0: <Keyboard> on usbus0
 kbd0 at ukbd0
 ums0: <Mouse> on usbus0
 ums0: 3 buttons and [Z] coordinates ID=0
 Root mount waiting for: usbus0
 ums1: <Mouse REL> on usbus0
 ums1: 3 buttons and [XYZ] coordinates ID=0
 Trying to mount root from ufs:/dev/gpt/root [rw]...
 WARNING: / was not properly dismounted
 ZFS filesystem version 5
 ZFS storage pool version 28
 
 --------------080902050705040901050908--
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
To unsubscribe, send any mail to "[email protected]"

Reply via email to