Thank Bykov Vladislav and Kevin Oberman's recommendations. Later I received an e-mail,
immediately compile the kernel (make a note #options VESA).But the problem persists, dmesg Information Reference url http://url.cn/SQ0vXD. Even worse thing is, I do use "acpiconf -s 3"debugger, resulting in a notebook can not boot until yesterday afternoon for a good notebook motherboard, now do not dare to use “acpiconf -s 3” testing. Do you have suggestions for me? Thanks you~ -----邮件原件----- 发件人: Bykov Vladislav [mailto:[email protected]] 发送时间: 2014年8月13日 0:13 收件人: 张晓靖 主题: Re: My laptop can't resume from suspend. On Tue, Aug 12, 2014 at 12:20:28PM +0800, 张晓靖 wrote: > The laptop can't resume, the screen no display, no beep sound. Can you please try to install video driver for your card and remove VESA device from kernel configuration? 发件人: [email protected] [mailto:[email protected]] 代表 Kevin Oberman 发送时间: 2014年8月13日 1:15 收件人: 张晓靖 抄送: [email protected] 主题: Re: My laptop can't resume from suspend. On Mon, Aug 11, 2014 at 9:20 PM, 张晓靖 <[email protected] <mailto:[email protected]> > wrote: Hello, I am having a problem. My laptop is lenovo's zhaoyang K47A series HM65. I used ati graphics CARDS, Use the url ( <https://wiki.freebsd.org/Graphics> https://wiki.freebsd.org/Graphics) the method of normal driving the graphics card. After set " sysctl debug. Bootverbose = 1 sysctl debug. Acpi. Suspend_bounce = 1 sysctl debug. Acpi. Resume_beep = 1 acpiconf -s 3 " The laptop can't resume, the screen no display, no beep sound. Disabling ACPI not helps to fix the problem. All files downloaded from http://url.cn/WVISGF. Output from sysctl hw.acpi hw.acpi.supported_sleep_state: S1 S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.reset_video: 0 hw.acpi.cpu.cx_lowest: C1 hw.acpi.acline: 1 hw.acpi.battery.life: 100 hw.acpi.battery.time: -1 hw.acpi.battery.state: 0 hw.acpi.battery.units: 2 hw.acpi.battery.info_expire: 5 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: 62.0C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.passive_cooling: 1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 95.0C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 100.0C hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz0._TC1: 2 hw.acpi.thermal.tz0._TC2: 3 hw.acpi.thermal.tz0._TSP: 100 Sincerely, ZhangXiaoJing. Have you tried building the kernel without VESA? Many laptops won't resume if you leave VESA in the kernel build. -- R. Kevin Oberman, Network Engineer, Retired E-mail: [email protected] <mailto:[email protected]> _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-acpi To unsubscribe, send any mail to "[email protected]"
