Hi, thanks again for your precious help. The suspend mode is not working yet as VESA option is still in my kernel configuration. I wanted to wait before removing it as I was not sure that intel video driver would have worked. My intention was to have a working setup with intel and being able to switch amongst vt(s) before getting rid of vesa, as I would peferer having the possibility to switch amongst vt(s) than putting my laptop to suspend.
By the way I have a 10-RELEASE therefore I suspect I will have to recompile the kernel with VT. Did I get you right? I googled a bit and it seems that the only thing I have to do is to add these devices to my kernel: device vt device vt_vga This is the source I am referring to: https://wiki.freebsd.org/Newcons. Is this it? Cheers and thanks again, Daniele. 2014-07-26 8:14 GMT+02:00 Kevin Oberman <[email protected]>: > On Fri, Jul 25, 2014 at 3:19 PM, Bykov Vladislav <> <[email protected]> > wrote: > >> On Fri, Jul 25, 2014 at 10:43:11PM +0200, Daniele Mazzotti wrote: >> > The error I get anytime I try to switch between terminals is the >> following >> > one " drmDropMaster failed: Unknown error: -22" >> This is okay, if you can't switch back to tty after starting Xorg in KMS >> mode using old syscons driver. There is already work going on with new >> driver, vt. I didn't test it though. >> >> At least, suspend is works now? >> > > Try adding kern.vty=vt to /boot/loader.conf. In recent 9-stable, > 10-stable, and head kernels, this is all it takes to switch to vt(4). If > you have an older kernel or are running any release, you will need to > rebuild the kernel using the VT configuration. The loader option may have > made 9.3, but I'm not sure. I don't believe vt(4) is available for 8. > -- > R. Kevin Oberman, Network Engineer, Retired > E-mail: [email protected] > > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-acpi To unsubscribe, send any mail to "[email protected]"
