On Monday, May 05, 2014 3:55:31 pm Adrian Chadd wrote: > Hi, > > Would you mind testing the latest -HEAD out? It worked a couple weeks > ago with my last rebuild on this particular laptop.
My x220 resumes just fine with yesterday's HEAD from S3. Uses ahci: ahci0: <Intel Cougar Point AHCI SATA controller> port 0x50a8-0x50af,0x50bc-0x50bf,0x50a0-0x50a7,0x50b8-0x50bb,0x5060-0x507f mem 0xd2528000-0xd25287ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST320LT000-9VL142 0003LVM1> ATA-8 SATA 2.x device ada0: Serial Number W0Q06E4A ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 305245MB (625142448 512 byte sectors: 1H 63S/T 16383C) ada0: quirks=0x1<4K> ada0: Previously was known as ad4 ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device -- John Baldwin _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-acpi To unsubscribe, send any mail to "[email protected]"
