On Fri, Oct 12, 2012 at 10:06:17AM -0400, John Baldwin wrote:
> On Friday, October 05, 2012 5:53:16 pm Juergen Lock wrote:
> > Hi!
> >
> > I finally took a closer look why acpi_video found nothing on my
> > Dell laptop (Precision M4500), and came up with this patch:
> >
> > --- sys/dev/acpica/acpi_video.c.orig
> > +++ sys/dev/acpica/acpi_video.c
> > @@ -906,7 +906,7 @@ vid_enum_outputs_subr(ACPI_HANDLE handle
> >
> > for (i = 0; i < argset->dod_pkg->Package.Count; i++) {
> > if (acpi_PkgInt32(argset->dod_pkg, i, &val) == 0 &&
> > - (val & DOD_DEVID_MASK_FULL) == adr) {
> > + (val & (DOD_DEVID_MASK_FULL | 0x80000000)) == adr) {
> > argset->callback(handle, val, argset->context);
> > argset->count++;
> > }
> >
> > which gives me:
>
> I think this is correct, but in we need to do more to properly handle that
> flag (DOD_DEVID_SCHEME_STD). Specifically, we shouldn't trust any bits in
> the
> device ID unless that bit is set (except for the special case of
> DOD_DEVID_LCD) as per my reading of the _DOD description in the ACPI 3.0b
> spec. I think this larger patch will do that while also fixing your case:
>
> Index: acpi_video.c
> ===================================================================
> --- acpi_video.c (revision 241382)
> +++ acpi_video.c (working copy)
> @@ -320,7 +320,8 @@ acpi_video_resume(device_t dev)
> ACPI_SERIAL_BEGIN(video_output);
> STAILQ_FOREACH_SAFE(vo, &sc->vid_outputs, vo_next, vn) {
> if ((vo->adr & DOD_DEVID_MASK_FULL) != DOD_DEVID_LCD &&
> - (vo->adr & DOD_DEVID_MASK) != DOD_DEVID_INTDFP)
> + (vo->adr & (DOD_DEVID_SCHEME_STD | DOD_DEVID_MASK)) !=
> + (DOD_DEVID_SCHEME_STD | DOD_DEVID_INTDFP))
> continue;
>
> if ((vo_get_device_status(vo->handle) & DCS_ACTIVE) == 0)
> @@ -467,38 +468,40 @@ acpi_video_vo_init(UINT32 adr)
>
> ACPI_SERIAL_ASSERT(video);
>
> - switch (adr & DOD_DEVID_MASK) {
> + /* Assume an unknown unit by default. */
> + desc = "unknown output";
> + type = "out";
> + voqh = &other_units;
> +
> + switch (adr & (DOD_DEVID_SCHEME_STD | DOD_DEVID_MASK)) {
> case DOD_DEVID_MONITOR:
> if ((adr & DOD_DEVID_MASK_FULL) == DOD_DEVID_LCD) {
> /* DOD_DEVID_LCD is a common, backward compatible ID */
> desc = "Internal/Integrated Digital Flat Panel";
> type = "lcd";
> voqh = &lcd_units;
> - } else {
> - desc = "VGA CRT or VESA Compatible Analog Monitor";
> - type = "crt";
> - voqh = &crt_units;
> }
> break;
> - case DOD_DEVID_TV:
> + case DOD_DEVID_SCHEME_STD | DOD_DEVID_MONITOR:
> + desc = "VGA CRT or VESA Compatible Analog Monitor";
> + type = "crt";
> + voqh = &crt_units;
> + break;
> + case DOD_DEVID_SCHEME_STD | DOD_DEVID_TV:
> desc = "TV/HDTV or Analog-Video Monitor";
> type = "tv";
> voqh = &tv_units;
> break;
> - case DOD_DEVID_EXT:
> + case DOD_DEVID_SCHEME_STD | DOD_DEVID_EXT:
> desc = "External Digital Monitor";
> type = "ext";
> voqh = &ext_units;
> break;
> - case DOD_DEVID_INTDFP:
> + case DOD_DEVID_SCHEME_STD | DOD_DEVID_INTDFP:
> desc = "Internal/Integrated Digital Flat Panel";
> type = "lcd";
> voqh = &lcd_units;
> break;
> - default:
> - desc = "unknown output";
> - type = "out";
> - voqh = &other_units;
> }
>
> n = 0;
> @@ -633,21 +636,25 @@ acpi_video_vo_destroy(struct acpi_video_output *vo
> AcpiOsFree(vo->vo_levels);
> }
>
> - switch (vo->adr & DOD_DEVID_MASK) {
> + voqh = &other_units;
> +
> + switch (vo->adr & (DOD_DEVID_SCHEME_STD | DOD_DEVID_MASK)) {
> case DOD_DEVID_MONITOR:
> + if ((vo->adr & DOD_DEVID_MASK_FULL) == DOD_DEVID_LCD)
> + voqh = &lcd_units;
> + break;
> + case DOD_DEVID_SCHEME_STD | DOD_DEVID_MONITOR:
> voqh = &crt_units;
> break;
> - case DOD_DEVID_TV:
> + case DOD_DEVID_SCHEME_STD | DOD_DEVID_TV:
> voqh = &tv_units;
> break;
> - case DOD_DEVID_EXT:
> + case DOD_DEVID_SCHEME_STD | DOD_DEVID_EXT:
> voqh = &ext_units;
> break;
> - case DOD_DEVID_INTDFP:
> + case DOD_DEVID_SCHEME_STD | DOD_DEVID_INTDFP:
> voqh = &lcd_units;
> break;
> - default:
> - voqh = &other_units;
> }
> STAILQ_REMOVE(voqh, vo, acpi_video_output, vo_unit.next);
> free(vo, M_ACPIVIDEO);
> @@ -906,7 +913,8 @@ vid_enum_outputs_subr(ACPI_HANDLE handle, UINT32 l
>
> for (i = 0; i < argset->dod_pkg->Package.Count; i++) {
> if (acpi_PkgInt32(argset->dod_pkg, i, &val) == 0 &&
> - (val & DOD_DEVID_MASK_FULL) == adr) {
> + (val & (DOD_DEVID_SCHEME_STD | DOD_DEVID_MASK_FULL)) ==
> + adr) {
> argset->callback(handle, val, argset->context);
> argset->count++;
> }
>
> --
> John Baldwin
Thank you, yes that still works for me the same as my original patch:
% sysctl hw.acpi.video.
hw.acpi.video.crt0.active: 0
hw.acpi.video.lcd0.active: 0
hw.acpi.video.lcd0.brightness: 100
hw.acpi.video.lcd0.fullpower: 100
hw.acpi.video.lcd0.economy: 46
hw.acpi.video.lcd0.levels: 100 46 0 6 13 20 26 33 40 46 53 60 66 73 80 86 93 100
hw.acpi.video.ext0.active: 0
hw.acpi.video.ext1.active: 0
hw.acpi.video.ext2.active: 0
hw.acpi.video.ext3.active: 0
%
Juergen
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
To unsubscribe, send any mail to "[email protected]"
