John, thanks for the reply. Linux boot I have not tried, but under WinXP network works. How can I fix this problem under FreeBSD or need to wait for a new BIOS?
-----Original Message----- From: John Baldwin [mailto:[email protected]] Sent: Monday, November 29, 2010 3:56 PM To: [email protected] Cc: Igor Bayunov Subject: Re: PCI netwok devices does not work on Intel DP43BFL On Monday, November 29, 2010 2:47:28 am Igor Bayunov wrote: > Hello, > I have a problem with motheboard Intel DP43BFL and FreeBSD-7.3. > Any network card (for example 3Com905, Realtek8139) installed in any > PCI slot is not found. > BIOS has updated. Boot without ACPI failed. > FreeBSD-8.1 has the same problem. > The following text is in the dmesg: > pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 > - AE_NOT_FOUND. You can ignore this message. You have a busted BIOS however, but we should be able to work around it. The problem is here: > pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pcib8: domain 0 > pcib8: secondary bus 32 > pcib8: subordinate bus 8 > pcib8: I/O decode 0xc000-0xcfff > pcib8: memory decode 0xe3100000-0xe31fffff > pcib8: no prefetched decode > pcib8: Subtractively decoded bridge. > pci32: <ACPI PCI bus> on pcib8 > pci32: domain=0, physical bus=32 The 'secondary bus' on a PCI-PCI bridge must be <= the subordinate bus number. I suspect if you boot Linux it whines about needing to adjust the bus number to 8? -- John Baldwin _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-acpi To unsubscribe, send any mail to "[email protected]"
