I am not very informed about how make works when building fpc installations, I have just used commands I have gathered online and it has worked...
Now I would like to know: 1) Does make clean inside the fpc source dir erase ALL of the binaries produced by an earlier build inside that source tree? 2) If so, does these two versions of "make all" build for ARMv7 and ARMv6 respecitively: make all FPC=/home/pi/dev/ppcarm OPT="-dFPC_ARMHF" make all FPC=/home/pi/dev/ppcarm OPT="-dFPC_ARMHF -CpARMV6 -OpARMV6" 3) Does the following command overwrite existing files from an earlier attempt so the CPU target can be replaced? For ARMv7: make install OPT="-dFPC_ARMHF" PREFIX=/home/pi FPC="/home/pi/dev/ppcarm" For ARMv6: make install OPT="-dFPC_ARMHF -CpARMV6 -OpARMV6" PREFIX=/home/pi FPC="/home/pi/dev/ppcarm" 4) Do I also need to switch the seed compiler /home/pi/dev/ppcarm (3.0.4) between v6 and v7 or can any of the two work to build correctly fpc itself? The reason I am asking is that I need to switch my system from building ARMv7 binaries to build ARMv6 binaries and I don't want to start over from scratch on this RPi, which I have used for some time... Hopefully make clean make all make install with the proper options will do the trick.... TIA.. -- Bo Berglund Developer in Sweden _______________________________________________ fpc-pascal maillist - fpc-pascal@lists.freepascal.org https://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
