Does anyone have any advice on how to get started sending commands from FPC to use these ethernet relays:
https://www.amazon.com/gp/product/B076CNJNFH Default IP :192.168.1.4 prot:30000 http://192.168.1.4/30000 HTTP Comment: http://192.168.1.4/30000/00 : Relay-01 OFF http://192.168.1.4/30000/01 : Relay-01 ON http://192.168.1.4/30000/02 : Relay-02 OFF http://192.168.1.4/30000/03 : Relay-02 ON http://192.168.1.4/30000/04 : Relay-03 OFF http://192.168.1.4/30000/05 : Relay-03 ON ... http://192.168.1.4/30000/14 : Relay-8 OFF http://192.168.1.4/30000/15 : Relay-8 ON http://192.168.1.4/30000/41 : Enter http://192.168.1.4/30000/40 : Exit http://192.168.1.4/30000/42 : Next Page http://192.168.1.4/30000/43 : Next Page I don't really know what I even need to do to send commands like that over the network. Of course I can get it to work just typing the commands from a browser but that's not what I want, I want my FPC console program to send the appropriate commands whenever I want one of the relays to come on or go off. Any suggestions on how this might be accomplished? James _______________________________________________ fpc-pascal maillist - fpc-pascal@lists.freepascal.org https://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-pascal
