Where can I find the rtl guide or documentation for the serial library.
I'm only using linux/unix
and since I don't want to recreate the wheel sort to speak I just need
details on how to use the
existing library. Couldn't find anything about it in the current 2.2.x
dox. Thanks.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
= = = = = = = = = = = = = = =
Dale Harris
Tektronix System Engineer
"I would rather have a good plan today than a perfect plan two weeks
from now."
General
George S. Patton
This e-mail and any files transmitted with it are the property of
Tektronix, are confidential and are
intended solely for the use of the individual or entity to whom this
e-mail is addressed. If you are
not one of the named recipient(s), or otherwise have reason to believe
that you have received this
message in error, please notify the sender at the above phone number or
email address and delete this
message immediately from your computer. Any other use, retention,
dissemination, forwarding, printing
or copying of this e-mail is strictly prohibited. The recipient should
check this email and any
attachments for the presence of viruses. I accept no liability for any
damage caused by any virus
transmitted by this email. Any ideas or opinions expressed here do not
necessarily reflect the ideas
or opinions of my employer.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tom Walsh
Sent: Wednesday, October 10, 2007 4:36 AM
To: FPC-Pascal users discussions
Subject: Re: [fpc-pascal] Serial port interrupts?
John Coppens wrote:
> Hello people.
>
> To make a debugging tool, I need to time changes on the serial port
> control and status lines on a Linux machine. The serial port hardware
> has this possibility, but is it possible to program this in a more or
> less high-level way? I did this a long time ago in DOS.
>
> I've looked at several libraries, but none seem to give access to
> line/status change events in realtime.
>
>
I doubt that you could do the same with Windows XP. Hardware operations
are abstracted such that the device is "managed" via a kernel device
driver. To do what you want to do might require you to write / modify
the serial port driver.
Having said that, it would be doubtful as to how finite a measurement /
control that you could exert over the serial port. Modern kernels are
multi-tasking beasts, and by design, no one process (thread) should /
could take up the full attention of the kernel for any significant
amount of time. Even under an interrupt driven service there would be
jitter and an unpredictable response time before the service routine is
actually run.
TomW
--
Tom Walsh - WN3L - Embedded Systems Consultant http://openhardware.net
http://cyberiansoftware.com http://openzipit.org "Windows? No thanks, I
have work to do..."
----------------------------------------------------
_______________________________________________
fpc-pascal maillist - fpc-pascal@lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-pascal
_______________________________________________
fpc-pascal maillist - fpc-pascal@lists.freepascal.org
http://lists.freepascal.org/mailman/listinfo/fpc-pascal
