you can find a lot of information on CMSIS here:
http://www.arm.com/products/processors/cortex-m/cortex-microcontroller-software-interface-standard.php
To download the svd-files you need to create a free account @arm.com,
then you can download lots of svd files for all major chips.
It is even easier when you have a license for the keil ide, they provide
a tool that makes downloading the files even easier (and sometimes files
are a little more up-to-date)
My first attempt was to convert the .h files to .pp (I still have some
programs to do that), the problem there is that sometimes the header
files are incomplete, the definitions for the bits in the registers is
often missing.
The .svd files are xml files that are quite easy to parse and they
usually contain all the information on the bit level. And the nice thing
is that no cleanup is necessary ;-)
Michael
Am 01.12.14 um 20:33 schrieb Sietse Achterop:
Hello list,
@Florian: thanks for finding my error. I saw that something was case
insensitive, but not in this way(:
it now works!
@Michael:
On 11/30/2014 08:14 PM, Michael Ring wrote:
Please download my diff here:
http://temp.michael-ring.org/fpc-arm.diff
Please have a look at the rtl-files I provide (and tell me if you
like the way I created them) , they are automagically created out of
the CMSIS sources provided by ARM&ST.
I had a short look at them. It looks clean.
But I am curious, how did you create them. I also started from the
source from ARM&ST. I used programs that I found on the Internet like
h2pas, en 2 versions of c2pas.
But they only partly did the job, so there still was quit some
handwork needed to get it to compile.
And it still needs a lot of cleaning up.
If I have it properly working, I want to make the ST-libraries for the
standard I/O and USB available. I think I will not try to translate it
into Pascal, but directly
use the ST-libraries from C.
(I use STM32_USB-Host-Device_Lib_V2.1.0)
I'll keep you informed.
Sietse
_______________________________________________
fpc-devel maillist - [email protected]
http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel
_______________________________________________
fpc-devel maillist - [email protected]
http://lists.freepascal.org/cgi-bin/mailman/listinfo/fpc-devel
