Hello reza, What is the exact command you are running?
Also note there is a message in the logs you copied: > At least some flash regions are write protected. For write operations, > you should use a flash layout and include only writable regions. See > manpage for more details. On Sat, Mar 8, 2025 at 4:51 PM reza adinepour <r3zaadinep...@gmail.com> wrote: > > Hi all, > > when i programm internally, chip doesn't programm and bellow message show: > I try to disable WP using "--wp-disable" feature but it doesn't have effect > on programm flash. > thanks to help me. > > > > flashrom v1.6.0-devel (git:v1.5.0-19-g971ea27d) on Linux > 6.9.3-76060903-generic (x86_64) > flashrom is free software, get the source code at https://flashrom.org > > Cannot open file stream for /dev/mtd0 > coreboot table found at 0x659fb000. > Found chipset "Intel Meteor Lake-P/M". > Enabling flash write... Warning: Setting BIOS Control at 0xdc from 0x8b to > 0x89 failed. > New value is 0x8b. > SPI Configuration is locked down. > FREG0: Flash Descriptor region (0x00000000-0x00003fff) is read-write. > FREG1: BIOS region (0x01000000-0x01ffffff) is read-write. > FREG2: Management Engine region (0x00006000-0x00a69fff) is read-write. > FREG3: Gigabit Ethernet region (0x00004000-0x00005fff) is read-write. > FREG9: Device Expansion 2 region (0x00a6a000-0x00ffffff) is read-write. > PR0: Warning: 0x01050000-0x01ffffff is read-only. > PR1: Warning: 0x01000000-0x0100ffff is read-only. > At least some flash regions are write protected. For write operations, > you should use a flash layout and include only writable regions. See > manpage for more details. > OK. > Found Winbond flash chip "W25Q256JW_DTR" (32768 kB, Programmer-specific) on > internal. > Disabled hardware protection > Reading old flash chip contents... done. > Updating flash chip contents... Transaction error between offset 0x01000000 > and 0x01000000 (= 0x01000000 + 0)! > Erase/write done from 0 to 1ffffff > Write Failed!Uh oh. Erase/write failed. Checking if anything has changed. > Reading current flash chip contents... done. > Apparently at least some data has changed. > Your flash chip is in an unknown state. > Get help on IRC (see https://www.flashrom.org/Contact) or mail > flashrom@flashrom.org with the subject "FAILED: <your board > name>"!------------------------------------------------------------------------------- > DO NOT REBOOT OR POWEROFF! > > _______________________________________________ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-le...@flashrom.org -- Anastasia. _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
