Dear Robert, The product key is stored in the BIOS, when connected to the internet will automatically activated at running Windows 11 Pro.
Did you disable ME state before flashing the BIOS? Goto 'advanced' page and click 'Ctrl+F1' to show hidden option. Disable the ME State by path: Advanced > PCH-FM Configuration > ME State > Disable Best Regards, Alex Lui Minix Group Company Limited Minix Forum: https://theminixforum.com -----Original Message----- From: Robert [mailto:open...@openbsd.hu] Sent: Monday, January 6, 2025 8:20 PM To: Alex Lui <alex....@minix.com.hk>; flashrom@flashrom.org Cc: supp...@minix.com.hk Subject: Re: BIOS update fails on a Minix Z100-0db device Thank you Alex, this is very useful info. So if I am on 0161 now, do I have to go 0171 then 0181 then 0191? One more question: how do I back up the product key exactly? I already tried to update to 0181 with flashrom, but that failed, then reverte to 0161 with flashrom that succeeded. I hope I did not erase the product key? regards, Robert On Mon, 2025-01-06 at 11:25 +0800, Alex Lui wrote: > Dear Robert, > > Many thanks for contacting us. > > What is the currently BIOS version (project version) on NEO Z100-0dB? > When booting, press the "DEL" key repeatedly to enter the BIOS > homepage. See attached pic. > > AD0J0151 or AD0J0161 cannot be directly updated to AD0J0181 or > AD0J0.191 in UEFI. It must be updated to AD0J0.171 first. > > AD0J0171 BIOS for Z100-0dB can be downloaded from link below: > https://mega.nz/file/fvRkSIgJ#riNMb_bjsuTePo_l0Co1aWsCLTZTVAbNAw1j3vQC > 5WQ > > File name: Z100-0dB-BIOS-171_UEFI.zip > File size: 18.4 MB > > AD0J0181 BIOS update under UEFI for Z100-0dB can be downloaded from > link below: > https://mega.nz/file/T64FwaDR#Ic4a69ntKaoF2RrXLDcMM94x1Gt1YYkezWPediBW > XtY > > Please note: Please back up the product key when updating BIOS under > UEFI, as this will erase the product key stored in the BIOS. > > Look forward to hearing from you soon. > > Best Regards, > Alex Lui > > Minix Group Company Limited > Minix Forum: https://theminixforum.com > > > > -----Original Message----- > From: Robert [mailto:open...@openbsd.hu] > Sent: Sunday, January 5, 2025 2:44 AM > To: supp...@minix.com.hk; flashrom@flashrom.org > Cc: open...@openbsd.hu > Subject: BIOS update fails on a Minix Z100-0db device > > > Hi guys, > > I tried to update the BIOS on my Minix Z100-0db device so that I can > boot a Linux UEFI from the NVME disk. Pls. see below: > > 1. As per > https://theminixforum.com/index.php?threads/guide-updating-bios-uefi-u > sing-gnu-linux-no-windows-needed.6905 > I downloaded the newest image for Minix:AD0J0181.bin > (well download zip, decompress) > 2. I booted the device from an archlinux install USB and copied the > new image there so I can access it > 3. I installed flashrom to the arch install OS (pacman -S flashrom), > the version is 1.5.1-1, compiled Dec 20 2024 4. I made a backup of > the current version: flashrom -p internal -c > "Opaque flash chip" -r my_backup_bios_AD0J0161.bin ... so far so > good .. > 5. I attempted to upload the new binary: flashrom -p internal -c > "Opaque flash chip" -w my_backup_bios_AD0J0161.bin > > issue follows: > > Opened /dev/mtd0 successfully > Found programmer flash chip "Opaque flash chip" > linux_mtd_wp_read_cfg: ioctl Operation not supported Failed to unlock > flash status reg with wp support. > Reading old flash chip contents... done. > Updating flash chip contents... linux_mtd_erase: MEMERASE ioctl call > returned -, error: Input/output error Erase/write done from 0 to > ffffff Write Failed!Uh oh. Erase/write failed. Checking if anything > has changed. > Reading current flash chip contents... done. > Apparently at least some data has changed. > Your flash chip is in an unknown state. > Get help ... > > Retried with -f, which in turn again changed something, but same > outcome. > I did not try to put back the original image so far, it would probably > give me the same > > The device is still on sitting in the arch install shell, I increased > the install disk size and added a few packages to help with the > possible fix, since I believe if I would try to reboot, the device > would be lost, and I would likely have to replace it. > > I am a long time linux user, can try any workaround or optionally even > allow ssh access to the device. > Can someone please give me some hints about where to go from here. > > Appeciate your time, > Robert _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
