Please forward any questions relative to the Polaroid scanner to : [EMAIL PROTECTED]
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Laurie Solomon Sent: Tuesday, November 29, 2005 11:49 AM To: Kapetanakis, Constantine Subject: [filmscanners] RE: Old Polaroid 4000 I am unfamiliar with your scanner and its film holders; but it is possible that the binding could be caused by warping of the holders which may ever so slightly change the flatness and shape of the holder. Independent of what they are made from or how they are designed, all holders are open to a certain amount of aging, abuse, wear, and environmental changes in conditions which can cause them to warp, expand, contract, acquire rough spots that catch where they use to be smooth. If the holder is transported on a rail system, there may be uneven spots on the rail which cause the holder to bind. A possible reason that the negative holder does not bind as much as the slide holder could very well be that the weight of the former is less than the weight of the latter - both unloaded and loaded with film. This brings up a different thought. It might also be that the slide mounts of the slides loaded in the slide holder have warped or become slightly malformed causing them to raise up while in the holder causing the holder to bind. Many of these things can be exasperated by the heat which the scanner gives off after running for several minutes which may be enough to cause things to temporarily experience increased unevenness which returns to an existing state when the holder cools off. Just some speculations. ----Original Message---- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, November 29, 2005 9:10 AM To: [EMAIL PROTECTED] Subject: [filmscanners] RE: Old Polaroid 4000 > Peter > > > > ============================================ > Original Message > > Hi, > > I've been using my Polaroid SS4000 for some time and have noticed a > problem which has increased with time. Scanning negatives has always > worked well, but occasionally (now nearly all the time) I have a > problem with the slide holder binding (or something). That is, when I > turn on the scanner, I can get one or two scans done, but then I will > get an error message telling me that there is something blocking the > movement of the film holder. Of course, there isn't, and when I try > to work with it, I can move it, but it is clearly binding, being > hindered in travel by some aspect of the scanner. > > I measured the dimensions of the film holder for slides and it is very > definitely larger than the negative holder. But at one time I had > little problem with either slides or negatives. > > Thoughts or suggestions? > > > Brad > > -------------------------------------------------------------- > -------------------------- > Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe > filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in > the message title or body > > > -------------------------------------------------------------- > -------------------------- > Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe > filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in > the message title or body ------------------------------------------------------------------------ ---------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body -- This transmission is intended only for use by the addressee(s) named herein and may contain information that is proprietary, confidential and/or legally privileged. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body
