That happens every now and then ;-) Regards,
Austin > Someone else has confirmed that the emulsion is up in the Flex. It does > look like the light source is in the bottom so your guidance was indeed > correct. > > Thanks. > > Simon > > On 27/4/02 8:53 pm, "Austin Franklin" <[EMAIL PROTECTED]> wrote: > > >> The Getting Started manual states in two places that the film is > >> inserted in > >> the holder emulsion side up. However, the Flextight Photo > manual states > >> that the film should be loaded emulsion side down. > > > > Hi Simon, > > > > At least with the Leafscan 45, you DO load the film into the > holder emulsion > > side down, AND the holder is placed in the scanner upside down, > therefore > > emulsion side up...so for the Leaf, what you say makes perfect > > sense...except the Leaf has the CCD on the top, and the light > source is on > > the bottom. I am guessing with the Imacon, the light source is > on the top, > > and the CCD on the bottom? > > > > Either way, the emulsion faces the CCD, just like in an enlarger, the > > emulsion faces the paper... Check to see if the holder goes in > upside down, > > which would make both statements you said correct. > > > > Austin ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body
