For those who would be happy to jump down my throat otherwise, first the disclaimer: I have never owned or operated a Nikon film scanner.
From Martin's description, I am guessing one of a few things might be occurring. 1: software installation got corrupted 2: there is a hardware problem with the scanner (or firmware) 3: You are indicating to the scanner you have mounted negs (although that would produce a inverted (negative) image) A very strong greenish blue cast would occur if the scanner was attempting to correct for the orange dye mask that negative films have. Since this dye mask is not there in slides, this greenish blue color cast would be added to the image, making it quite inaccurate in that direction. I would try reinstalling the software first. Then, with the scanner off, I would fully unplugging the scanner at both the AC and interface cable to the computer and then restoring the connections, and turn the scanner on. If none of this helps, try scanner a strip of transparencies (unmounted, and see if that makes any difference (even the beginning of the roll might do). Art Bill Fernandez wrote: > Very odd. I've been scanning Kodachromes, Ektachromes and Kodacolor > negs with no such color problems. > > --Bill > > > At 8:20 PM -0500 9-1-02, Martin Greene wrote: > >>I want to add to the message below, the fact that the green cast only occurs >>on slides. scans of negatives are fine. >> >>I recently purchased a Nikon Supercoolscan 4000. I am using Nikon Scan 3.1 >>on a mac with OS 9.1. All of my pre-scans and scans have an extreme green >>cast, to the point that all other colors are obliterated. I had the scame >>scanner 6 months ago and did not experience this problem. I tried getting >>help from Nikon. After many hours, turning off color controls and various >>settings, the tech support person told me I'd have to go for help with "the >>big boys upstairs." That meant, calling and waiting for another tech >>support "lower level" person to send me on "upstairs," which I was then >>told by a voice recording that it was a two hour wait. I gave up. I'd >>appreciate if someone could assist me in less time. >> >>Martin >> >>---------------------------------------------------------------------------------------- >>Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe >>filmscanners' >>or 'unsubscribe filmscanners_digest' (as appropriate) in the message >>title or body >> > > > -- > > ====================================================================== > Bill Fernandez * User Interface Architect * Bill Fernandez Design > > (505) 346-3080 * [EMAIL PROTECTED] * http://billfernandez.com > ====================================================================== > > ---------------------------------------------------------------------------------------- > Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' > or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body > > . > > ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body
