> We have been initially working with the 2110 decode example on the > github site (https://github.com/cbcrc/FFmpeg) and have been > successfully streaming media with it. We have evolved our design and > would like to operate with multiple media streams.
The set up is probably a bit complex for anyone to be able to quickly reproduce. Can you simplify it for debugging purposes? e.g. remove the SDP file and stream from a URL directly? Ideally you want the minimum number of components in play that demonstrate the problem (which will also tell you which component is at fault, if the problem goes away once you remove that part). I am wondering whether it's some issue around multicast and the subscription/unsubscription messages getting mixed up. Can you look at the local system's IGMP subscription list (e.g. /proc/net/igmp) and confirm that the subscriptions aren't dropping out when you're losing data? You could try streaming from two different IP addresses instead of just the one to see if this makes the problem go away. If it works from two different IPs but not two streams from the same IP, that would confirm that it's probably an issue related to the multicast unsubscription messages being sent at the wrong time. But if you get the problem with only one stream per IP address you can probably rule out IGMP as the issue. Sorry I couldn't be more helpful but it's a bit of an involved set up to reproduce locally for testing. Cheers, Adam. _______________________________________________ ffmpeg-user mailing list ffmpeg-user@ffmpeg.org https://ffmpeg.org/mailman/listinfo/ffmpeg-user To unsubscribe, visit link above, or email ffmpeg-user-requ...@ffmpeg.org with subject "unsubscribe".
