> -----Original Message-----
> From: ffmpeg-devel [mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of
> Mark Thompson
> Sent: Monday, July 08, 2019 3:27 AM
> To: ffmpeg-devel@ffmpeg.org
> Subject: [FFmpeg-devel] [PATCH v4 1/2] vaapi_encode: Add ROI support
>
> ---
> libavcodec/vaapi_encode.c | 118
> ++++++++++++++++++++++++++++++++
> libavcodec/vaapi_encode.h | 18 +++++
> libavcodec/vaapi_encode_h264.c | 2 +
> libavcodec/vaapi_encode_h265.c | 2 +
> libavcodec/vaapi_encode_mpeg2.c | 2 +
> libavcodec/vaapi_encode_vp8.c | 2 +
> libavcodec/vaapi_encode_vp9.c | 2 +
> 7 files changed, 146 insertions(+)
>
> diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c
> index dd2a24de04..41de023226 100644
> --- a/libavcodec/vaapi_encode.c
> +++ b/libavcodec/vaapi_encode.c
> @@ -166,6 +166,7 @@ static int vaapi_encode_issue(AVCodecContext *avctx,
> int err, i;
> char data[MAX_PARAM_BUFFER_SIZE];
> size_t bit_len;
> + av_unused AVFrameSideData *sd;
>
> av_log(avctx, AV_LOG_DEBUG, "Issuing encode for
> pic %"PRId64"/%"PRId64" "
> "as type %s.\n", pic->display_order, pic->encode_order,
> @@ -435,6 +436,71 @@ static int vaapi_encode_issue(AVCodecContext
> *avctx,
> }
> }
>
> +#if VA_CHECK_VERSION(1, 0, 0)
> + sd = av_frame_get_side_data(pic->input_image,
> +
> AV_FRAME_DATA_REGIONS_OF_INTEREST);
> + if (sd && ctx->roi_allowed) {
> + const AVRegionOfInterest *roi;
> + uint32_t roi_size;
> + VAEncMiscParameterBufferROI param_roi;
> + int nb_roi, i, v;
> +
> + roi = (const AVRegionOfInterest*)sd->data;
> + roi_size = roi->self_size;
> + av_assert0(roi_size && sd->size % roi_size == 0);
> + nb_roi = sd->size / roi_size;
> + if (nb_roi > ctx->roi_max_regions) {
> + if (!ctx->roi_warned) {
> + av_log(avctx, AV_LOG_WARNING, "More ROIs set than "
> + "supported by driver (%d > %d).\n",
> + nb_roi, ctx->roi_max_regions);
> + ctx->roi_warned = 1;
> + }
> + nb_roi = ctx->roi_max_regions;
> + }
> +
> + pic->roi = av_mallocz_array(nb_roi, sizeof(*pic->roi));
> + if (!pic->roi) {
> + err = AVERROR(ENOMEM);
> + goto fail;
> + }
> + // For overlapping regions, the first in the array takes priority.
> + for (i = 0; i < nb_roi; i++) {
> + roi = (const AVRegionOfInterest*)(sd->data + roi_size * i);
> +
> + av_assert0(roi->qoffset.den != 0);
> + v = roi->qoffset.num * ctx->roi_quant_range / roi->qoffset.den;
> + av_log(avctx, AV_LOG_DEBUG, "ROI: (%d,%d)-(%d,%d)
> -> %+d.\n",
> + roi->top, roi->left, roi->bottom, roi->right, v);
> +
> + pic->roi[i] = (VAEncROI) {
> + .roi_rectangle = {
> + .x = roi->left,
> + .y = roi->top,
> + .width = roi->right - roi->left,
> + .height = roi->bottom - roi->top,
> + },
> + .roi_value = av_clip_c(v, INT8_MIN, INT8_MAX),
> + };
> + }
> +
> + param_roi = (VAEncMiscParameterBufferROI) {
> + .num_roi = nb_roi,
> + .max_delta_qp = INT8_MAX,
> + .min_delta_qp = INT8_MIN,
> + .roi = pic->roi,
> + .roi_flags.bits.roi_value_is_qp_delta = 1,
> + };
> +
> + err = vaapi_encode_make_misc_param_buffer(avctx, pic,
> +
> VAEncMiscParameterTypeROI,
> + ¶m_roi,
> +
> sizeof(param_roi));
> + if (err < 0)
> + goto fail;
> + }
> +#endif
> +
> vas = vaBeginPicture(ctx->hwctx->display, ctx->va_context,
> pic->input_surface);
> if (vas != VA_STATUS_SUCCESS) {
> @@ -500,6 +566,7 @@ fail_at_end:
> av_freep(&pic->codec_picture_params);
> av_freep(&pic->param_buffers);
> av_freep(&pic->slices);
> + av_freep(&pic->roi);
> av_frame_free(&pic->recon_image);
> av_buffer_unref(&pic->output_buffer_ref);
> pic->output_buffer = VA_INVALID_ID;
> @@ -634,6 +701,7 @@ static int vaapi_encode_free(AVCodecContext *avctx,
>
> av_freep(&pic->priv_data);
> av_freep(&pic->codec_picture_params);
> + av_freep(&pic->roi);
>
> av_free(pic);
>
> @@ -948,6 +1016,19 @@ static int
> vaapi_encode_check_frame(AVCodecContext *avctx,
> ctx->crop_warned = 1;
> }
>
> + if (!ctx->roi_allowed) {
> + AVFrameSideData *sd =
> + av_frame_get_side_data(frame,
> AV_FRAME_DATA_REGIONS_OF_INTEREST);
> +
> + if (sd && !ctx->roi_warned) {
> + if (sd && !ctx->roi_warned) {
looks good except this duplicate code
> + av_log(avctx, AV_LOG_WARNING, "ROI side data on input
> "
> + "frames ignored due to lack of driver
> support.\n");
> + ctx->roi_warned = 1;
> + }
> + }
> + }
> +
> return 0;
> }
>
> @@ -1942,6 +2023,39 @@ static av_cold int
> vaapi_encode_init_quality(AVCodecContext *avctx)
> return 0;
> }
>
> +static av_cold int vaapi_encode_init_roi(AVCodecContext *avctx)
> +{
> +#if VA_CHECK_VERSION(1, 0, 0)
> + VAAPIEncodeContext *ctx = avctx->priv_data;
> + VAStatus vas;
> + VAConfigAttrib attr = { VAConfigAttribEncROI };
> +
> + vas = vaGetConfigAttributes(ctx->hwctx->display,
> + ctx->va_profile,
> + ctx->va_entrypoint,
> + &attr, 1);
> + if (vas != VA_STATUS_SUCCESS) {
> + av_log(avctx, AV_LOG_ERROR, "Failed to query ROI "
> + "config attribute: %d (%s).\n", vas, vaErrorStr(vas));
> + return AVERROR_EXTERNAL;
> + }
> +
> + if (attr.value == VA_ATTRIB_NOT_SUPPORTED) {
> + ctx->roi_allowed = 0;
> + } else {
> + VAConfigAttribValEncROI roi = {
> + .value = attr.value,
> + };
> +
> + ctx->roi_max_regions = roi.bits.num_roi_regions;
> + ctx->roi_allowed = ctx->roi_max_regions > 0 &&
> + (ctx->va_rc_mode == VA_RC_CQP ||
> + roi.bits.roi_rc_qp_delta_support);
> + }
> +#endif
> + return 0;
> +}
> +
> static void vaapi_encode_free_output_buffer(void *opaque,
> uint8_t *data)
> {
> @@ -2132,6 +2246,10 @@ av_cold int ff_vaapi_encode_init(AVCodecContext
> *avctx)
> if (err < 0)
> goto fail;
>
> + err = vaapi_encode_init_roi(avctx);
> + if (err < 0)
> + goto fail;
> +
> if (avctx->compression_level >= 0) {
> err = vaapi_encode_init_quality(avctx);
> if (err < 0)
> diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h
> index eeec06036b..b9a3defd72 100644
> --- a/libavcodec/vaapi_encode.h
> +++ b/libavcodec/vaapi_encode.h
> @@ -69,6 +69,13 @@ typedef struct VAAPIEncodePicture {
> int64_t pts;
> int force_idr;
>
> +#if VA_CHECK_VERSION(1, 0, 0)
> + // ROI regions.
> + VAEncROI *roi;
> +#else
> + void *roi;
> +#endif
> +
> int type;
> int b_depth;
> int encode_issued;
> @@ -304,9 +311,20 @@ typedef struct VAAPIEncodeContext {
> int gop_counter;
> int end_of_stream;
>
> + // Whether the driver supports ROI at all.
> + int roi_allowed;
> + // Maximum number of regions supported by the driver.
> + int roi_max_regions;
> + // Quantisation range for offset calculations. Set by codec-specific
> + // code, as it may change based on parameters.
> + int roi_quant_range;
> +
> // The encoder does not support cropping information, so warn about
> // it the first time we encounter any nonzero crop fields.
> int crop_warned;
> + // If the driver does not support ROI then warn the first time we
> + // encounter a frame with ROI side data.
> + int roi_warned;
> } VAAPIEncodeContext;
>
> enum {
> diff --git a/libavcodec/vaapi_encode_h264.c b/libavcodec/vaapi_encode_h264.c
> index d1427112ea..f4965d8b09 100644
> --- a/libavcodec/vaapi_encode_h264.c
> +++ b/libavcodec/vaapi_encode_h264.c
> @@ -1130,6 +1130,8 @@ static av_cold int
> vaapi_encode_h264_configure(AVCodecContext *avctx)
> }
> }
>
> + ctx->roi_quant_range = 51 + 6 * (ctx->profile->depth - 8);
> +
> return 0;
> }
>
> diff --git a/libavcodec/vaapi_encode_h265.c b/libavcodec/vaapi_encode_h265.c
> index 758bd40a37..538862a9d5 100644
> --- a/libavcodec/vaapi_encode_h265.c
> +++ b/libavcodec/vaapi_encode_h265.c
> @@ -1102,6 +1102,8 @@ static av_cold int
> vaapi_encode_h265_configure(AVCodecContext *avctx)
> priv->fixed_qp_b = 30;
> }
>
> + ctx->roi_quant_range = 51 + 6 * (ctx->profile->depth - 8);
> +
> return 0;
> }
>
> diff --git a/libavcodec/vaapi_encode_mpeg2.c
> b/libavcodec/vaapi_encode_mpeg2.c
> index fb1ef71fdc..bac9ea1fa6 100644
> --- a/libavcodec/vaapi_encode_mpeg2.c
> +++ b/libavcodec/vaapi_encode_mpeg2.c
> @@ -552,6 +552,8 @@ static av_cold int
> vaapi_encode_mpeg2_configure(AVCodecContext *avctx)
> ctx->nb_slices = ctx->slice_block_rows;
> ctx->slice_size = 1;
>
> + ctx->roi_quant_range = 31;
> +
> return 0;
> }
>
> diff --git a/libavcodec/vaapi_encode_vp8.c b/libavcodec/vaapi_encode_vp8.c
> index ddbe4c9075..6e7bf9d106 100644
> --- a/libavcodec/vaapi_encode_vp8.c
> +++ b/libavcodec/vaapi_encode_vp8.c
> @@ -173,6 +173,8 @@ static av_cold int
> vaapi_encode_vp8_configure(AVCodecContext *avctx)
> else
> priv->q_index_i = priv->q_index_p;
>
> + ctx->roi_quant_range = VP8_MAX_QUANT;
> +
> return 0;
> }
>
> diff --git a/libavcodec/vaapi_encode_vp9.c b/libavcodec/vaapi_encode_vp9.c
> index f89fd0d07a..d7f415d704 100644
> --- a/libavcodec/vaapi_encode_vp9.c
> +++ b/libavcodec/vaapi_encode_vp9.c
> @@ -202,6 +202,8 @@ static av_cold int
> vaapi_encode_vp9_configure(AVCodecContext *avctx)
> priv->q_idx_idr = priv->q_idx_p = priv->q_idx_b = 100;
> }
>
> + ctx->roi_quant_range = VP9_MAX_QUANT;
> +
> return 0;
> }
>
> --
> 2.20.1
>
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
