On Thu, Feb 28, 2019 at 11:23 PM Guo, Yejun <yejun....@intel.com> wrote:
>
> Signed-off-by: Guo, Yejun <yejun....@intel.com>
> ---
> libavcodec/libvpxenc.c | 150
> +++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 150 insertions(+)
>
> diff --git a/libavcodec/libvpxenc.c b/libavcodec/libvpxenc.c
> index c823b8a..fc9b1fd 100644
> --- a/libavcodec/libvpxenc.c
> +++ b/libavcodec/libvpxenc.c
> @@ -1057,6 +1057,153 @@ static int queue_frames(AVCodecContext *avctx,
> AVPacket *pkt_out)
> return size;
> }
>
> +static int vp8_encode_set_roi(AVCodecContext *avctx, const AVFrame *frame)
> +{
> + /* range of vpx_roi_map_t.delta_q[i] is [-63, 63] */
> +#define MAX_DELTA_Q 63
> +
> + const AVRegionOfInterest *roi = NULL;
> + vpx_roi_map_t roi_map;
> + int ret = 0;
> + int nb_rois;
> + AVFrameSideData *sd = av_frame_get_side_data(frame,
> AV_FRAME_DATA_REGIONS_OF_INTEREST);
> + VPxContext *ctx = avctx->priv_data;
> + vpx_active_map_t active_map = { 0, 0, 0 };
{ 0 } will work.
> + int max_segment_cnt = 4; /* VP8 ROI only support 4 segments. */
> + int segment_id = 0;
> +
> + /* record the mapping from delta_q to "segment id + 1".
> + * delta_q is shift with MAX_DELTA_Q, and so the range is [0,
> 2*MAX_DELTA_Q].
> + * add 1 to segment id, so no mapping if the value of array element is
> zero.
> + */
> + int segment_mapping[2 * MAX_DELTA_Q + 1] = {0};
> +
{ 0 } would be more consistent with this file.
> + /* segment id 0 in roi_map is reserved for the areas not covered by
> AVRegionOfInterest.
> + * segment id 0 in roi_map is also for the areas with
> AVRegionOfInterest.qoffset near 0.
> + */
> + segment_mapping[MAX_DELTA_Q] = segment_id + 1;
> + segment_id++;
> +
> + active_map.rows = (frame->height + 15) / 16;
> + active_map.cols = (frame->width + 15) / 16;
> +
> + if (!sd) {
> + /* For the case that some middle frames do not have ROI while other
> frames have ROIs.
> + * Due to libvpx behaivor, we have to reset VP8E_SET_ACTIVEMAP,
> otherwise the previous
behavior
> + * ROIs continue working for frames without ROIs.
> + */
> + if (vpx_codec_control(&ctx->encoder, VP8E_SET_ACTIVEMAP,
> &active_map)) {
> + log_encoder_error(avctx, "Failed to set VP8E_SET_ACTIVEMAP codec
> control.\n");
> + return AVERROR_INVALIDDATA;
> + }
> + return 0;
> + }
> +
> + memset(&roi_map, 0, sizeof(roi_map));
> + roi_map.rows = active_map.rows;
> + roi_map.cols = active_map.cols;
> + roi_map.roi_map = av_mallocz(roi_map.rows * roi_map.cols);
> + if (!roi_map.roi_map) {
> + av_log(avctx, AV_LOG_ERROR, "roi_map alloc failed.\n");
> + ret = AVERROR(ENOMEM);
> + goto fail;
> + }
> +
> + active_map.active_map = av_malloc(active_map.rows * active_map.cols);
> + if (!active_map.active_map) {
> + av_log(avctx, AV_LOG_ERROR, "active_map alloc failed.\n");
> + ret = AVERROR(ENOMEM);
> + goto fail;
> + }
> + /* set 1 to enable the corresponding element of vpx_roi_map_t.roi_map. */
> + memset(active_map.active_map, 1, active_map.rows * active_map.cols);
> +
> + roi = (const AVRegionOfInterest*)sd->data;
> + if (!roi->self_size || sd->size % roi->self_size != 0) {
> + av_log(ctx, AV_LOG_ERROR, "Invalid AVRegionOfInterest.self_size.\n");
> + ret = AVERROR(EINVAL);
> + goto fail;
> + }
> + nb_rois = sd->size / roi->self_size;
> +
> + /* This list must be iterated from zero because regions are
> + * defined in order of decreasing importance. So discard less
> + * important areas if exceeding the supported segment count.
...if they exceed the segment count
> + */
> + for (int i = 0; i < nb_rois; i++) {
> + int qoffset;
> + int mapping_index;
> +
> + roi = (const AVRegionOfInterest*)(sd->data + roi->self_size * i);
> + if (roi->qoffset.den == 0) {
> + av_log(ctx, AV_LOG_ERROR, "AVRegionOfInterest.qoffset.den must
> not be zero.\n");
> + ret = AVERROR(EINVAL);
> + goto fail;
> + }
> +
> + qoffset = (int)(roi->qoffset.num * 1.0f / roi->qoffset.den *
> MAX_DELTA_Q);
> + qoffset = av_clip(qoffset, -MAX_DELTA_Q, MAX_DELTA_Q);
> +
> + mapping_index = qoffset + MAX_DELTA_Q;
> + if (!segment_mapping[mapping_index]) {
> + if (segment_id > max_segment_cnt - 1) {
> + av_log(ctx, AV_LOG_WARNING,
> + "ROI only support %d segments (and segment 0 is
> reserved for non-ROIs), skipping this one.\n",
supports
> + max_segment_cnt);
> + roi = (AVRegionOfInterest*)((char*)roi + roi->self_size);
> + continue;
> + }
> +
> + segment_mapping[mapping_index] = segment_id + 1;
> + roi_map.delta_q[segment_id] = qoffset;
> + segment_id++;
> + }
> + }
> +
> + /* This list must be iterated in reverse, so for the case that
> + * two regions overlapping, the more important area takes effect.
> + */
> + for (int i = nb_rois - 1; i >= 0; i--) {
> + int qoffset;
> + int mapping_value;
> + int starty, endy, startx, endx;
> +
> + roi = (const AVRegionOfInterest*)(sd->data + roi->self_size * i);
> +
> + starty = FFMIN(roi_map.rows, roi->top / 16);
> + endy = FFMIN(roi_map.rows, (roi->bottom + 15) / 16);
> + startx = FFMIN(roi_map.cols, roi->left / 16);
> + endx = FFMIN(roi_map.cols, (roi->right + 15) / 16);
> +
> + qoffset = (int)(roi->qoffset.num * 1.0f / roi->qoffset.den *
> MAX_DELTA_Q);
> + qoffset = av_clip(qoffset, -MAX_DELTA_Q, MAX_DELTA_Q);
> +
> + mapping_value = segment_mapping[qoffset + MAX_DELTA_Q];
> + if (mapping_value) {
> + for (int y = starty; y < endy; y++)
> + for (int x = startx; x < endx; x++)
> + roi_map.roi_map[x + y * roi_map.cols] = mapping_value -
> 1;
> + }
> + }
> +
> + if (vpx_codec_control(&ctx->encoder, VP8E_SET_ROI_MAP, &roi_map)) {
> + log_encoder_error(avctx, "Failed to set VP8E_SET_ROI_MAP codec
> control.\n");
> + ret = AVERROR_INVALIDDATA;
> + goto fail;
> + }
> +
> + if (vpx_codec_control(&ctx->encoder, VP8E_SET_ACTIVEMAP, &active_map)) {
> + log_encoder_error(avctx, "Failed to set VP8E_SET_ACTIVEMAP codec
> control.\n");
> + ret = AVERROR_INVALIDDATA;
> + goto fail;
> + }
> +
> +fail:
> + av_freep(&active_map.active_map);
> + av_freep(&roi_map.roi_map);
> + return ret;
> +}
> +
> static int vpx_encode(AVCodecContext *avctx, AVPacket *pkt,
> const AVFrame *frame, int *got_packet)
> {
> @@ -1113,6 +1260,9 @@ static int vpx_encode(AVCodecContext *avctx, AVPacket
> *pkt,
> flags |= strtoul(en->value, NULL, 10);
> }
> }
> +
> + if (avctx->codec_id == AV_CODEC_ID_VP8)
> + vp8_encode_set_roi(avctx, frame);
> }
>
> res = vpx_codec_encode(&ctx->encoder, rawimg, timestamp,
> --
> 2.7.4
>
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel@ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
