On Fri, 26 Oct 2018 at 04:10, Zhou, Zachary <zachary.z...@intel.com> wrote:
> > > > -----Original Message----- > > From: ffmpeg-devel [mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of > > sean darcy > > Sent: Thursday, October 25, 2018 11:51 PM > > To: ffmpeg-devel@ffmpeg.org > > Subject: Re: [FFmpeg-devel] [PATCH V2] libavfilter/vaapi: enable vaapi > > rotation feature via call Intel iHD driver > > > > On 10/25/18 2:52 AM, Zachary Zhou wrote: > > > It supports clockwise rotation by 0/90/180/270 degrees defined in > > > va/va_vpp.h, tested following command line on SKL platform > > > > > > dir=0 for 0 degree > > > dir=1 for 90 degree > > > dir=2 for 180 degree > > > dir=3 for 270 degree > > > > > > ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128 > > > -hwaccel_output_format vaapi -i input.264 -vf "rotation_vaapi=dir=1" > > > -c:v h264_vaapi output.h264 > > > > > > Signed-off-by: Zachary Zhou <zachary.z...@intel.com> > > > --- > > > configure | 3 + > > > libavfilter/Makefile | 1 + > > > libavfilter/allfilters.c | 1 + > > > libavfilter/vaapi_vpp.h | 1 + > > > libavfilter/vf_rotate_vaapi.c | 252 > ++++++++++++++++++++++++++++++++++ > > > 5 files changed, 258 insertions(+) > > > create mode 100644 libavfilter/vf_rotate_vaapi.c > > > > > > diff --git a/configure b/configure > > > index 85d5dd5962..33aced3d78 100755 > > > --- a/configure > > > +++ b/configure > > > @@ -6390,6 +6390,9 @@ if enabled vaapi; then > > > fi > > > > > > check_cpp_condition vaapi_1 "va/va.h" "VA_CHECK_VERSION(1, 0, 0)" > > > + if ! check_struct "va/va.h" "struct _VAProcPipelineCaps" > rotation_flags; > > then > > > + disable rotation_vaapi_filter > > > + fi > > > fi > > > > > > if enabled_all opencl libdrm ; then > > > diff --git a/libavfilter/Makefile b/libavfilter/Makefile index > > > 108a2f87d7..534650364a 100644 > > > --- a/libavfilter/Makefile > > > +++ b/libavfilter/Makefile > > > @@ -349,6 +349,7 @@ OBJS-$(CONFIG_SETRANGE_FILTER) += > > vf_setparams.o > > > OBJS-$(CONFIG_SETSAR_FILTER) += vf_aspect.o > > > OBJS-$(CONFIG_SETTB_FILTER) += settb.o > > > OBJS-$(CONFIG_SHARPNESS_VAAPI_FILTER) += vf_misc_vaapi.o > > vaapi_vpp.o > > > +OBJS-$(CONFIG_ROTATION_VAAPI_FILTER) += vf_rotate_vaapi.o > > vaapi_vpp.o > > > OBJS-$(CONFIG_SHOWINFO_FILTER) += vf_showinfo.o > > > OBJS-$(CONFIG_SHOWPALETTE_FILTER) += vf_showpalette.o > > > OBJS-$(CONFIG_SHUFFLEFRAMES_FILTER) += vf_shuffleframes.o > > > diff --git a/libavfilter/allfilters.c b/libavfilter/allfilters.c index > > > 557590850b..4b90a7f440 100644 > > > --- a/libavfilter/allfilters.c > > > +++ b/libavfilter/allfilters.c > > > @@ -333,6 +333,7 @@ extern AVFilter ff_vf_setrange; > > > extern AVFilter ff_vf_setsar; > > > extern AVFilter ff_vf_settb; > > > extern AVFilter ff_vf_sharpness_vaapi; > > > +extern AVFilter ff_vf_rotation_vaapi; > > > extern AVFilter ff_vf_showinfo; > > > extern AVFilter ff_vf_showpalette; > > > extern AVFilter ff_vf_shuffleframes; diff --git > > > a/libavfilter/vaapi_vpp.h b/libavfilter/vaapi_vpp.h index > > > 0bc31018d4..cfe19b689f 100644 > > > --- a/libavfilter/vaapi_vpp.h > > > +++ b/libavfilter/vaapi_vpp.h > > > @@ -44,6 +44,7 @@ typedef struct VAAPIVPPContext { > > > int output_width; // computed width > > > int output_height; // computed height > > > > > > + int rotation_state; > > > VABufferID filter_buffers[VAProcFilterCount]; > > > int nb_filter_buffers; > > > > > > diff --git a/libavfilter/vf_rotate_vaapi.c > > > b/libavfilter/vf_rotate_vaapi.c new file mode 100644 index > > > 0000000000..34c270e9c7 > > > --- /dev/null > > > +++ b/libavfilter/vf_rotate_vaapi.c > > > @@ -0,0 +1,252 @@ > > > +/* > > > + * This file is part of FFmpeg. > > > + * > > > + * FFmpeg is free software; you can redistribute it and/or > > > + * modify it under the terms of the GNU Lesser General Public > > > + * License as published by the Free Software Foundation; either > > > + * version 2.1 of the License, or (at your option) any later version. > > > + * > > > + * FFmpeg is distributed in the hope that it will be useful, > > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > GNU > > > + * Lesser General Public License for more details. > > > + * > > > + * You should have received a copy of the GNU Lesser General Public > > > + * License along with FFmpeg; if not, write to the Free Software > > > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA > > > +02110-1301 USA */ #include <string.h> > > > + > > > +#include "libavutil/avassert.h" > > > +#include "libavutil/mem.h" > > > +#include "libavutil/opt.h" > > > +#include "libavutil/pixdesc.h" > > > + > > > +#include "avfilter.h" > > > +#include "formats.h" > > > +#include "internal.h" > > > +#include "vaapi_vpp.h" > > > + > > > +// Rotation angle values > > > +enum RotationAngle { > > > + ROTATION_0 = 0, > > > + ROTATION_90 = 1, > > > + ROTATION_180 = 2, > > > + ROTATION_270 = 3, > > > + > > > + ROTATION_MIN = ROTATION_0, > > > + ROTATION_MAX = ROTATION_270, > > > + ROTATION_DEFAULT = ROTATION_0, > > > +}; > > > + > > > +typedef struct RotationVAAPIContext { > > > + VAAPIVPPContext vpp_ctx; // must be the first field > > > + > > > + int rotation; // enable rotation. > > > +} RotationVAAPIContext; > > > + > > > +static int rotation_vaapi_build_filter_params(AVFilterContext *avctx) > > > +{ > > > + VAAPIVPPContext *vpp_ctx = avctx->priv; > > > + RotationVAAPIContext *ctx = avctx->priv; > > > + > > > + VAStatus vas; > > > + int support_flag; > > > + > > > + VAProcPipelineCaps pipeline_caps; > > > + > > > + memset(&pipeline_caps, 0, sizeof(pipeline_caps)); > > > + vas = vaQueryVideoProcPipelineCaps(vpp_ctx->hwctx->display, > > > + vpp_ctx->va_context, > > > + NULL, 0, > > > + &pipeline_caps); > > > + if (vas != VA_STATUS_SUCCESS) { > > > + av_log(avctx, AV_LOG_ERROR, "Failed to query pipeline " > > > + "caps: %d (%s).\n", vas, vaErrorStr(vas)); > > > + return AVERROR(EIO); > > > + } > > > + > > > + if (!pipeline_caps.rotation_flags) { > > > + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support > > rotation\n"); > > > + return AVERROR(EINVAL); > > > + } > > > + > > > + switch (ctx->rotation) { > > > + case ROTATION_0: > > > + vpp_ctx->rotation_state = VA_ROTATION_NONE; > > > + break; > > > + case ROTATION_90: > > > + vpp_ctx->rotation_state = VA_ROTATION_90; > > > + break; > > > + case ROTATION_180: > > > + vpp_ctx->rotation_state = VA_ROTATION_180; > > > + break; > > > + case ROTATION_270: > > > + vpp_ctx->rotation_state = VA_ROTATION_270; > > > + break; > > > + default: > > > + av_log(avctx, AV_LOG_ERROR, "Failed to set rotation_state to > %d. " > > > + "Clockwise %d, %d, %d and %d are only supported\n", > > > + ctx->rotation, > > > + ROTATION_0, ROTATION_90, ROTATION_180, ROTATION_270); > > > + return AVERROR(EINVAL); > > > + } > > > + > > > + support_flag = pipeline_caps.rotation_flags & > > > + (1 << vpp_ctx->rotation_state); > > > + if (!support_flag) { > > > + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support > %d\n", > > > + ctx->rotation); > > > + return AVERROR(EINVAL); > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +static int rotation_vaapi_filter_frame(AVFilterLink *inlink, AVFrame > > > +*input_frame) { > > > + AVFilterContext *avctx = inlink->dst; > > > + AVFilterLink *outlink = avctx->outputs[0]; > > > + VAAPIVPPContext *vpp_ctx = avctx->priv; > > > + AVFrame *output_frame = NULL; > > > + VASurfaceID input_surface, output_surface; > > > + VARectangle input_region; > > > + > > > + VAProcPipelineParameterBuffer params; > > > + int err; > > > + > > > + av_log(avctx, AV_LOG_DEBUG, "Filter input: %s, %ux%u > (%"PRId64").\n", > > > + av_get_pix_fmt_name(input_frame->format), > > > + input_frame->width, input_frame->height, > > > + input_frame->pts); > > > + > > > + if (vpp_ctx->va_context == VA_INVALID_ID) > > > + return AVERROR(EINVAL); > > > + > > > + input_surface = (VASurfaceID)(uintptr_t)input_frame->data[3]; > > > + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp > input.\n", > > > + input_surface); > > > + > > > + output_frame = ff_get_video_buffer(outlink, vpp_ctx->output_width, > > > + vpp_ctx->output_height); > > > + if (!output_frame) { > > > + err = AVERROR(ENOMEM); > > > + goto fail; > > > + } > > > + > > > + output_surface = (VASurfaceID)(uintptr_t)output_frame->data[3]; > > > + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp > > output.\n", > > > + output_surface); > > > + memset(¶ms, 0, sizeof(params)); > > > + input_region = (VARectangle) { > > > + .x = 0, > > > + .y = 0, > > > + .width = input_frame->width, > > > + .height = input_frame->height, > > > + }; > > > + > > > + switch (vpp_ctx->rotation_state) { > > > + case VA_ROTATION_NONE: > > > + case VA_ROTATION_90: > > > + case VA_ROTATION_180: > > > + case VA_ROTATION_270: > > > + params.rotation_state = vpp_ctx->rotation_state; > > > + break; > > > + default: > > > + av_log(avctx, AV_LOG_ERROR, "VAAPI doesn't support %d\n", > > > + vpp_ctx->rotation_state); > > > + goto fail; > > > + } > > > + > > > + if (vpp_ctx->nb_filter_buffers) { > > > + params.filters = &vpp_ctx->filter_buffers[0]; > > > + params.num_filters = vpp_ctx->nb_filter_buffers; > > > + } > > > + params.surface = input_surface; > > > + params.surface_region = &input_region; > > > + params.surface_color_standard = > > > + ff_vaapi_vpp_colour_standard(input_frame->colorspace); > > > + > > > + params.output_region = NULL; > > > + params.output_background_color = 0xff000000; > > > + params.output_color_standard = params.surface_color_standard; > > > + > > > + params.pipeline_flags = 0; > > > + params.filter_flags = VA_FRAME_PICTURE; > > > + > > > + err = ff_vaapi_vpp_render_picture(avctx, ¶ms, output_surface); > > > + if (err < 0) > > > + goto fail; > > > + > > > + err = av_frame_copy_props(output_frame, input_frame); > > > + if (err < 0) > > > + goto fail; > > > + av_frame_free(&input_frame); > > > + > > > + av_log(avctx, AV_LOG_DEBUG, "Filter output: %s, %ux%u > > (%"PRId64").\n", > > > + av_get_pix_fmt_name(output_frame->format), > > > + output_frame->width, output_frame->height, > > > + output_frame->pts); > > > + > > > + return ff_filter_frame(outlink, output_frame); > > > + > > > +fail: > > > + av_frame_free(&input_frame); > > > + av_frame_free(&output_frame); > > > + return err; > > > +} > > > + > > > +static av_cold int rotation_vaapi_init(AVFilterContext *avctx) { > > > + VAAPIVPPContext *vpp_ctx = avctx->priv; > > > + > > > + ff_vaapi_vpp_ctx_init(avctx); > > > + vpp_ctx->pipeline_uninit = ff_vaapi_vpp_pipeline_uninit; > > > + vpp_ctx->build_filter_params = rotation_vaapi_build_filter_params; > > > + vpp_ctx->output_format = AV_PIX_FMT_NONE; > > > + > > > + return 0; > > > +} > > > + > > > +#define ROFFSET(x) offsetof(RotationVAAPIContext, x) #define FLAGS > > > +(AV_OPT_FLAG_VIDEO_PARAM | AV_OPT_FLAG_FILTERING_PARAM) static > > const > > > +AVOption rotation_vaapi_options[] = { > > > + { "dir", "set roation direction", ROFFSET(rotation), > AV_OPT_TYPE_INT, > > { .i64 = ROTATION_MIN }, ROTATION_MIN, ROTATION_MAX, FLAGS, "dir" }, > > > + { "clock_0", "rotate clockwise 0 degrees", 0, > AV_OPT_TYPE_CONST, > > { .i64 = ROTATION_0 }, .flags=FLAGS, .unit = "dir" }, > > > + { "clock_90", "rotate clockwise 90 degrees", 0, > AV_OPT_TYPE_CONST, > > { .i64 = ROTATION_90}, .flags=FLAGS, .unit = "dir" }, > > > + { "clock_180", "rotate clockwise 180 degrees", 0, > AV_OPT_TYPE_CONST, > > { .i64 = ROTATION_180 }, .flags=FLAGS, .unit = "dir" }, > > > + { "clock_270", "rotate clockwise 270 degrees", 0, > AV_OPT_TYPE_CONST, > > { .i64 = ROTATION_270 }, .flags=FLAGS, .unit = "dir" }, > > > + { NULL }, > > > +}; > > > + > > > +AVFILTER_DEFINE_CLASS(rotation_vaapi); > > > + > > > +static const AVFilterPad rotation_vaapi_inputs[] = { > > > + { > > > + .name = "default", > > > + .type = AVMEDIA_TYPE_VIDEO, > > > + .filter_frame = &rotation_vaapi_filter_frame, > > > + .config_props = &ff_vaapi_vpp_config_input, > > > + }, > > > + { NULL } > > > +}; > > > + > > > +static const AVFilterPad rotation_vaapi_outputs[] = { > > > + { > > > + .name = "default", > > > + .type = AVMEDIA_TYPE_VIDEO, > > > + .config_props = &ff_vaapi_vpp_config_output, > > > + }, > > > + { NULL } > > > +}; > > > + > > > +AVFilter ff_vf_rotation_vaapi = { > > > + .name = "rotation_vaapi", > > > + .description = NULL_IF_CONFIG_SMALL("VAAPI VPP for rotation"), > > > + .priv_size = sizeof(RotationVAAPIContext), > > > + .init = &rotation_vaapi_init, > > > + .uninit = &ff_vaapi_vpp_ctx_uninit, > > > + .query_formats = &ff_vaapi_vpp_query_formats, > > > + .inputs = rotation_vaapi_inputs, > > > + .outputs = rotation_vaapi_outputs, > > > + .priv_class = &rotation_vaapi_class, > > > + .flags_internal = FF_FILTER_FLAG_HWFRAME_AWARE, }; > > > > > How about: > > > > deg=0 for 0 degree > > deg=90 for 90 degree > > deg=180 for 180 degree > > deg=270 for 270 degree > > > > ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128 > > -hwaccel_output_format vaapi -i input.264 -vf "rotation_vaapi=deg=90" > > -c:v h264_vaapi output.h264 > > > > The rotation is in degrees , not direction. And using the actual degrees > instead > > of magic numbers makes it more obvious for the user. > > > My first version of the patch(https://patchwork.ffmpeg.org/patch/10754/) > just like this. > > ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128 > -hwaccel_output_format vaapi -i input.264 -vf "rotation_vaapi=angle=90" > -c:v h264_vaapi output.h264 > > And I got comments to add sub-options. the sub-options are clock_0, > clock_90, clock_180, clock_270, the command line likes this. > > ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128 > -hwaccel_output_format vaapi -i input.264 -vf "rotation_vaapi= clock_270" > -c:v h264_vaapi output.h264 > > > > > > _______________________________________________ > > ffmpeg-devel mailing list > > ffmpeg-devel@ffmpeg.org > > http://ffmpeg.org/mailman/listinfo/ffmpeg-devel > _______________________________________________ > ffmpeg-devel mailing list > ffmpeg-devel@ffmpeg.org > http://ffmpeg.org/mailman/listinfo/ffmpeg-devel Please, call it transpose_vaapi, and make it accept the same options as the transpose filter we have. transpose != rotation. _______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org http://ffmpeg.org/mailman/listinfo/ffmpeg-devel