Thanks;
TS file http://www99.zippyshare.com/v/UwxzRccM/file.html
Error log attached.
I am using omxplayer to play this TS on Raspberry PI.
Selecting Audio track 1 - give funny noise
Stream #0:4[0x3a2](zho): Audio: aac_latm (HE-AAC) ([17][0][0][0] / 0x0011),
48000 Hz, 5.1, fltp
Selecting Audio track 2 - no problem.
Stream #0:5[0x3a3]: Audio: aac_latm (HE-AAC) ([17][0][0][0] / 0x0011), 48000
Hz, stereo, fltp
Thank you very much
Regards
Johnson Kung
Antechnic Engineering Pte Ltd
50 Ubi Avenue 3 #05-02 Frontier
S(408866)
Mobile: 9631-2875
Office: 6282-8690
-----Original Message-----
From: ffmpeg-devel [mailto:ffmpeg-devel-boun...@ffmpeg.org] On Behalf Of Lou
Logan
Sent: Thursday, September 28, 2017 10:30 AM
To: ffmpeg-devel@ffmpeg.org
Subject: Re: [FFmpeg-devel] ffmpeg have program decoding ACC ltam audo stream
On Wed, Sep 27, 2017, at 06:00 PM, jk...@antechnic.com wrote:
> I am sure I already registered but was always rejected from the list.
What message are you receiving?
Messages from non-subscribed users automatically go into a moderation queue,
but I did not notice a message from you in the queue–there is a chance I may
have missed it. Also, your email address is not listed as being subscribed to
ffmpeg-user. However, I did not view the email logs to investigate further.
> Please advise how I can upload my sample TS
You can use something like Dropbox or Google Drive and then provide a link. If
it's under 500k (actually that's the limit for the whole
message) you can attach it to your email message.
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] decode_slice_header error
[h264 @ 0x10e4100] no frame!
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] decode_slice_header error
[h264 @ 0x10e4100] no frame!
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] decode_slice_header error
[h264 @ 0x10e4100] no frame!
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] decode_slice_header error
[h264 @ 0x10e4100] no frame!
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] decode_slice_header error
[h264 @ 0x10e4100] no frame!
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] SPS unavailable in decode_picture_timing
[h264 @ 0x10e4100] non-existing PPS 0 referenced
[h264 @ 0x10e4100] decode_slice_header error
[h264 @ 0x10e4100] no frame!
[aac_latm @ 0x10e7c40] Number of bands (7) exceeds limit (3).
[aac_latm @ 0x10e7c40] element type mismatch 1 != 0
[aac_latm @ 0x10e7c40] element type mismatch 1 != 0
[aac_latm @ 0x10faba0] element type mismatch 1 != 0
[mpegts @ 0x10deee0] PES packet size mismatch
[mpegts @ 0x10deee0] PES packet size mismatch
[mpegts @ 0x10deee0] start time for stream 1 is not set in
estimate_timings_from_pts
[mpegts @ 0x10deee0] start time for stream 2 is not set in
estimate_timings_from_pts
[mpegts @ 0x10deee0] PES packet size mismatch
[mpegts @ 0x10deee0] PES packet size mismatch
[mpegts @ 0x10deee0] Could not find codec parameters for stream 3 (Unknown:
none ([5][0][0][0] / 0x0005)): unknown codec
Consider increasing the value for the 'analyzeduration' and 'probesize' options
Input #0, mpegts, from '1.TS':
Duration: 00:01:49.70, start: 5.000000, bitrate: 7867 kb/s
Program 19
Stream #0:0[0x2d0]: Video: h264 (High) ([27][0][0][0] / 0x001B),
yuv420p(tv, bt709, top first), 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 50 tbr,
90k tbn, 50 tbc
Stream #0:1[0x2e4](eng): Subtitle: dvb_subtitle ([6][0][0][0] / 0x0006)
Stream #0:2[0x2e5](zho): Subtitle: dvb_subtitle ([6][0][0][0] / 0x0006)
Stream #0:3[0x30c]: Unknown: none ([5][0][0][0] / 0x0005)
Stream #0:4[0x3a2](zho): Audio: aac_latm (HE-AAC) ([17][0][0][0] / 0x0011),
48000 Hz, 5.1, fltp
Stream #0:5[0x3a3]: Audio: aac_latm (HE-AAC) ([17][0][0][0] / 0x0011),
48000 Hz, stereo, fltp
Video codec omx-h264 width 1920 height 1080 profile 100 fps 50.000000
Audio codec aac_latm channels 6 samplerate 48000 bitspersample 16
Subtitle count: 2, state: off, index: 1, delay: 0
[aac_latm @ 0x11a91a0] Number of bands (7) exceeds limit (3).
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac_latm @ 0x11a91a0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/incoming/ and contact the ffmpeg-devel mailing list.
(ffmpeg-devel@ffmpeg.org)
[aac_latm @ 0x11a91a0] Expected to read 5 SBR bytes actually read 16.
[aac_latm @ 0x11a91a0] channel element 2.7 is not allocated
[aac_latm @ 0x11a91a0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac_latm @ 0x11a91a0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/incoming/ and contact the ffmpeg-devel mailing list.
(ffmpeg-devel@ffmpeg.org)
[aac_latm @ 0x11a91a0] Expected to read 9 SBR bytes actually read 15.
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac_latm @ 0x11a91a0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/incoming/ and contact the ffmpeg-devel mailing list.
(ffmpeg-devel@ffmpeg.org)
[aac_latm @ 0x11a91a0] Expected to read 10 SBR bytes actually read 11.
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] noise_facs_q 31 is invalid
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] channel element 2.10 is not allocated
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] Scalefactor (-1) out of range.
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
V:PortSettingsChanged: 1920x1080@50.00 interlace:3 deinterlace:1 anaglyph:0
par:1.00 display:0 layer:0 alpha:255 aspectMode:0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (4) exceeds limit (3).
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[mpegts @ 0x10deee0] PES packet size mismatch
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[mpegts @ 0x10deee0] PES packet size mismatch
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (9) exceeds limit (3).
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] element type mismatch 1 != 0
[aac_latm @ 0x11a91a0] channel element 0.3 is not allocated
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] invalid band type
[aac_latm @ 0x11a91a0] TNS filter order 21 is greater than maximum 12.
[aac_latm @ 0x11a91a0] Number of bands (6) exceeds limit (3).
[aac_latm @ 0x11a91a0] Number of bands (52) exceeds limit (35).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] SSR is not implemented. Update your FFmpeg version to
the newest one from Git. If the problem still occurs, it means that your file
has a feature which has not been implemented.
[aac_latm @ 0x11a91a0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/incoming/ and contact the ffmpeg-devel mailing list.
(ffmpeg-devel@ffmpeg.org)
[aac_latm @ 0x11a91a0] Number of bands (4) exceeds limit (3).
[aac_latm @ 0x11a91a0] Number of bands (9) exceeds limit (3).
[aac_latm @ 0x11a91a0] Number of bands (41) exceeds limit (40).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (24) exceeds limit (3).
[aac_latm @ 0x11a91a0] Prediction is not allowed in AAC-LC.
[aac_latm @ 0x11a91a0] Number of bands (36) exceeds limit (35).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] invalid band type
[aac_latm @ 0x11a91a0] Number of bands (50) exceeds limit (35).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Prediction is not allowed in AAC-LC.
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (9) exceeds limit (3).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (37) exceeds limit (35).
[aac_latm @ 0x11a91a0] Number of bands (6) exceeds limit (3).
[aac_latm @ 0x11a91a0] Number of bands (5) exceeds limit (3).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (7) exceeds limit (3).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (11) exceeds limit (8).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (48) exceeds limit (35).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (42) exceeds limit (35).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (50) exceeds limit (35).
[aac_latm @ 0x11a91a0] Number of bands (4) exceeds limit (3).
[aac_latm @ 0x11a91a0] Number of bands (5) exceeds limit (3).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Scalefactor (-2) out of range.
[aac_latm @ 0x11a91a0] Number of bands (6) exceeds limit (3).
[aac_latm @ 0x11a91a0] SSR is not implemented. Update your FFmpeg version to
the newest one from Git. If the problem still occurs, it means that your file
has a feature which has not been implemented.
[aac_latm @ 0x11a91a0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/incoming/ and contact the ffmpeg-devel mailing list.
(ffmpeg-devel@ffmpeg.org)
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (40) exceeds limit (35).
[aac_latm @ 0x11a91a0] Number of bands (55) exceeds limit (35).
[aac_latm @ 0x11a91a0] Number of bands (7) exceeds limit (3).
[aac_latm @ 0x11a91a0] Number of bands (5) exceeds limit (3).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] SSR is not implemented. Update your FFmpeg version to
the newest one from Git. If the problem still occurs, it means that your file
has a feature which has not been implemented.
[aac_latm @ 0x11a91a0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/incoming/ and contact the ffmpeg-devel mailing list.
(ffmpeg-devel@ffmpeg.org)
[aac_latm @ 0x11a91a0] Number of bands (7) exceeds limit (3).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (11) exceeds limit (8).
[aac_latm @ 0x11a91a0] Number of bands (20) exceeds limit (15).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (38) exceeds limit (37).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (5) exceeds limit (3).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (40) exceeds limit (35).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (41) exceeds limit (35).
[aac_latm @ 0x11a91a0] Number of bands (4) exceeds limit (3).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Prediction is not allowed in AAC-LC.
[aac_latm @ 0x11a91a0] Number of bands (45) exceeds limit (35).
[aac_latm @ 0x11a91a0] Number of bands (53) exceeds limit (47).
[aac_latm @ 0x11a91a0] Number of bands (28) exceeds limit (3).
[aac_latm @ 0x11a91a0] channel element 3.7 is not allocated
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (7) exceeds limit (3).
[aac_latm @ 0x11a91a0] Reserved bit set.
[aac_latm @ 0x11a91a0] Number of bands (53) exceeds limit (35).
[aac_latm @ 0x11a91a0] Number of bands (34) exceeds limit (15).
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
