On 9/23/2017 3:24 PM, Michael Niedermayer wrote:
> On Tue, Sep 19, 2017 at 10:35:30PM +0200, Thomas Mundt wrote:
>> 2017-09-19 17:53 GMT+02:00 James Almer <jamr...@gmail.com>:
>>
>>> On 9/19/2017 5:02 AM, Thomas Mundt wrote:
>>>> 2017-09-19 4:09 GMT+02:00 James Almer <jamr...@gmail.com>:
>>>>
>>>>> On 9/18/2017 10:41 PM, Thomas Mundt wrote:
>>>>>> I tried to set up MIPS compiler for two days on windows and linux
>>> without
>>>>>> success.
>>>>>> Now I try it blind. This solution is based on the first suggestion
>>> James
>>>>>> gave me at IRC.
>>>>>> There might be room for improvement and an alternative solution with
>>>>>> AV_RL16() / AV_WL16().
>>>>>> I used av_le2ne16() because it will be ignored for little endian.
>>>>>>
>>>>>> Regards,
>>>>>> Thomas
>>>>>
>>>>>> From a2be5859266b1a2f7048b81ced6770ab4b90a5a4 Mon Sep 17 00:00:00 2001
>>>>>> From: Thomas Mundt <tmund...@gmail.com>
>>>>>> Date: Tue, 19 Sep 2017 00:25:25 +0200
>>>>>> Subject: [PATCH 3/3 v2] avfilter/interlace: add support for 10 and 12
>>> bit
>>>>>>
>>>>>> Signed-off-by: Thomas Mundt <tmund...@gmail.com>
>>>>>> ---
>>>>>> libavfilter/interlace.h | 5 +-
>>>>>> libavfilter/tinterlace.h | 5 +-
>>>>>> libavfilter/vf_interlace.c | 92
>>>>> ++++++++++++++++++++++----
>>>>>> libavfilter/vf_tinterlace.c | 73
>>> ++++++++++++++++++--
>>>>>> libavfilter/x86/vf_interlace.asm | 80
>>>>> ++++++++++++++++++++--
>>>>>> libavfilter/x86/vf_interlace_init.c | 51 ++++++++++----
>>>>>> libavfilter/x86/vf_tinterlace_init.c | 51 ++++++++++----
>>>>>> tests/ref/fate/filter-pixfmts-tinterlace_cvlpf | 11 +++
>>>>>> tests/ref/fate/filter-pixfmts-tinterlace_merge | 11 +++
>>>>>> tests/ref/fate/filter-pixfmts-tinterlace_pad | 11 +++
>>>>>> tests/ref/fate/filter-pixfmts-tinterlace_vlpf | 11 +++
>>>>>> 11 files changed, 345 insertions(+), 56 deletions(-)
>>>>>>
>>>>>> diff --git a/libavfilter/interlace.h b/libavfilter/interlace.h
>>>>>> index 2101b79..90a0198 100644
>>>>>> --- a/libavfilter/interlace.h
>>>>>> +++ b/libavfilter/interlace.h
>>>>>> @@ -25,9 +25,11 @@
>>>>>> #ifndef AVFILTER_INTERLACE_H
>>>>>> #define AVFILTER_INTERLACE_H
>>>>>>
>>>>>> +#include "libavutil/bswap.h"
>>>>>> #include "libavutil/common.h"
>>>>>> #include "libavutil/imgutils.h"
>>>>>> #include "libavutil/opt.h"
>>>>>> +#include "libavutil/pixdesc.h"
>>>>>>
>>>>>> #include "avfilter.h"
>>>>>> #include "formats.h"
>>>>>> @@ -55,8 +57,9 @@ typedef struct InterlaceContext {
>>>>>> enum ScanMode scan; // top or bottom field first scanning
>>>>>> int lowpass; // enable or disable low pass filtering
>>>>>> AVFrame *cur, *next; // the two frames from which the new one is
>>>>> obtained
>>>>>> + const AVPixFmtDescriptor *csp;
>>>>>> void (*lowpass_line)(uint8_t *dstp, ptrdiff_t linesize, const
>>>>> uint8_t *srcp,
>>>>>> - ptrdiff_t mref, ptrdiff_t pref);
>>>>>> + ptrdiff_t mref, ptrdiff_t pref, int
>>> clip_max);
>>>>>> } InterlaceContext;
>>>>>>
>>>>>> void ff_interlace_init_x86(InterlaceContext *interlace);
>>>>>> diff --git a/libavfilter/tinterlace.h b/libavfilter/tinterlace.h
>>>>>> index cc13a6c..b5c39aa 100644
>>>>>> --- a/libavfilter/tinterlace.h
>>>>>> +++ b/libavfilter/tinterlace.h
>>>>>> @@ -27,7 +27,9 @@
>>>>>> #ifndef AVFILTER_TINTERLACE_H
>>>>>> #define AVFILTER_TINTERLACE_H
>>>>>>
>>>>>> +#include "libavutil/bswap.h"
>>>>>> #include "libavutil/opt.h"
>>>>>> +#include "libavutil/pixdesc.h"
>>>>>> #include "drawutils.h"
>>>>>> #include "avfilter.h"
>>>>>>
>>>>>> @@ -60,8 +62,9 @@ typedef struct TInterlaceContext {
>>>>>> int black_linesize[4];
>>>>>> FFDrawContext draw;
>>>>>> FFDrawColor color;
>>>>>> + const AVPixFmtDescriptor *csp;
>>>>>> void (*lowpass_line)(uint8_t *dstp, ptrdiff_t width, const uint8_t
>>>>> *srcp,
>>>>>> - ptrdiff_t mref, ptrdiff_t pref);
>>>>>> + ptrdiff_t mref, ptrdiff_t pref, int
>>> clip_max);
>>>>>> } TInterlaceContext;
>>>>>>
>>>>>> void ff_tinterlace_init_x86(TInterlaceContext *interlace);
>>>>>> diff --git a/libavfilter/vf_interlace.c b/libavfilter/vf_interlace.c
>>>>>> index 55bf782..bfba054 100644
>>>>>> --- a/libavfilter/vf_interlace.c
>>>>>> +++ b/libavfilter/vf_interlace.c
>>>>>> @@ -61,8 +61,8 @@ static const AVOption interlace_options[] = {
>>>>>> AVFILTER_DEFINE_CLASS(interlace);
>>>>>>
>>>>>> static void lowpass_line_c(uint8_t *dstp, ptrdiff_t linesize,
>>>>>> - const uint8_t *srcp,
>>>>>> - ptrdiff_t mref, ptrdiff_t pref)
>>>>>> + const uint8_t *srcp, ptrdiff_t mref,
>>>>>> + ptrdiff_t pref, int clip_max)
>>>>>> {
>>>>>> const uint8_t *srcp_above = srcp + mref;
>>>>>> const uint8_t *srcp_below = srcp + pref;
>>>>>> @@ -75,9 +75,28 @@ static void lowpass_line_c(uint8_t *dstp, ptrdiff_t
>>>>> linesize,
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> +static void lowpass_line_c_16(uint8_t *dst8, ptrdiff_t linesize,
>>>>>> + const uint8_t *src8, ptrdiff_t mref,
>>>>>> + ptrdiff_t pref, int clip_max)
>>>>>> +{
>>>>>> + uint16_t *dstp = (uint16_t *)dst8;
>>>>>> + const uint16_t *srcp = (const uint16_t *)src8;
>>>>>> + const uint16_t *srcp_above = srcp + mref / 2;
>>>>>> + const uint16_t *srcp_below = srcp + pref / 2;
>>>>>> + int i;
>>>>>> + for (i = 0; i < linesize; i++) {
>>>>>> + // this calculation is an integer representation of
>>>>>> + // '0.5 * current + 0.25 * above + 0.25 * below'
>>>>>> + // '1 +' is for rounding.
>>>>>> + dstp[i] = av_le2ne16((1 + av_le2ne16(srcp[i]) +
>>> av_le2ne16(srcp[i])
>>>
>>> You might want to load srcp[i] into a local variable here as well.
>>>
>>>>>> + + av_le2ne16(srcp_above[i])
>>>>>> + + av_le2ne16(srcp_below[i])) >> 2);
>>>>>
>>>>> This might work (And Michael will be able to confirm that if
>>>>> filter-pixfmts-tinterlace_vlpf passes)...
>>>>>
>>>>>> + }
>>>>>> +}
>>>>>> +
>>>>>> static void lowpass_line_complex_c(uint8_t *dstp, ptrdiff_t linesize,
>>>>>> - const uint8_t *srcp,
>>>>>> - ptrdiff_t mref, ptrdiff_t pref)
>>>>>> + const uint8_t *srcp, ptrdiff_t
>>> mref,
>>>>>> + ptrdiff_t pref, int clip_max)
>>>>>> {
>>>>>> const uint8_t *srcp_above = srcp + mref;
>>>>>> const uint8_t *srcp_below = srcp + pref;
>>>>>> @@ -103,11 +122,46 @@ static void lowpass_line_complex_c(uint8_t *dstp,
>>>>> ptrdiff_t linesize,
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> +static void lowpass_line_complex_c_16(uint8_t *dst8, ptrdiff_t
>>>>> linesize,
>>>>>> + const uint8_t *src8, ptrdiff_t
>>>>> mref,
>>>>>> + ptrdiff_t pref, int clip_max)
>>>>>> +{
>>>>>> + uint16_t *dstp = (uint16_t *)dst8;
>>>>>> + const uint16_t *srcp = (const uint16_t *)src8;
>>>>>> + const uint16_t *srcp_above = srcp + mref / 2;
>>>>>> + const uint16_t *srcp_below = srcp + pref / 2;
>>>>>> + const uint16_t *srcp_above2 = srcp + mref;
>>>>>> + const uint16_t *srcp_below2 = srcp + pref;
>>>>>> + int i, srcp_x, srcp_ab;
>>>>>> + for (i = 0; i < linesize; i++) {
>>>>>> + // this calculation is an integer representation of
>>>>>> + // '0.75 * current + 0.25 * above + 0.25 * below - 0.125 *
>>>>> above2 - 0.125 * below2'
>>>>>> + // '4 +' is for rounding.
>>>>>> + srcp_x = av_le2ne16(srcp[i]) << 1;
>>>>>> + srcp_ab = av_le2ne16(srcp_above[i]) +
>>> av_le2ne16(srcp_below[i]);
>>>>>> + dstp[i] = av_le2ne16(av_clip((4 + ((av_le2ne16(srcp[i]) +
>>>>> srcp_x + srcp_ab) << 1)
>>>>>> + - av_le2ne16(srcp_above2[i])
>>>>>> + - av_le2ne16(srcp_below2[i])) >>
>>>>> 3, 0, clip_max));
>>>>>> + // Prevent over-sharpening:
>>>>>> + // dst must not exceed src when the average of above and below
>>>>>> + // is less than src. And the other way around.
>>>>>> + if (srcp_ab > srcp_x) {
>>>>>> + if (av_le2ne16(dstp[i]) < av_le2ne16(srcp[i]))
>>>>>> + dstp[i] = srcp[i];
>>>>>> + } else if (av_le2ne16(dstp[i]) > av_le2ne16(srcp[i]))
>>>>>> + dstp[i] = srcp[i];
>>>>>
>>>>> ...but chances are this over-sharpening prevention part will not. You're
>>>>> loading in native endianness here before storing. You only byteswapped
>>>>> for the comparison.
>>>>>
>>>>> Also, consider using local variables inside the for loop. You're loading
>>>>> scrp[i] and dstp[i] several times per iteration.
>>>>>
>>>>
>>>> Okay, then I would do:
>>>> int i, dstp_le, srcp_le, srcp_x, srcp_ab;
>>>
>>> These are not pointers, so maybe remove the "p" to avoid confusion.
>>>
>>>> for (i = 0; i < linesize; i++) {
>>>> srcp_le = av_le2ne16(srcp[i]);
>>>> srcp_x = srcp_le << 1;
>>>> srcp_ab = av_le2ne16(srcp_above[i]) + av_le2ne16(srcp_below[i]);
>>>> dstp_le = av_clip((4 + (srcp_le + srcp_x + srcp_ab) << 1)
>>>> - av_le2ne16(srcp_above2[i])
>>>> - av_le2ne16(srcp_below2[i])) >> 3, 0,
>>> clip_max);
>>>> if (srcp_ab > srcp_x) {
>>>> if (dstp_le < srcp_le)
>>>> dstp[i] = srcp[i];
>>>> else
>>>> dstp[i] = av_le2ne16(dstp_le);
>>>> } else if (dstp_le > srcp_le) {
>>>> dstp[i] = srcp[i];
>>>> } else
>>>> dstp[i] = av_le2ne16(dstp_le);
>>>> }
>>>> Shall I do dstp[i] = av_le2ne16(srcp_le); instead of dstp[i] = srcp[i]; ?
>>>
>>> Yes. No need to load srcp[i] again.
>>>
>>
>> Okay, thanks!
>> A patch with your suggestions is attached.
>> I will send a separate patch that removes the "p" from srcp_x and src_ab
>> in lowpass_line_complex_c function for consistency.
>
>> libavfilter/interlace.h | 5 +
>> libavfilter/tinterlace.h | 5 +
>> libavfilter/vf_interlace.c | 97
>> +++++++++++++++++++++----
>> libavfilter/vf_tinterlace.c | 78 ++++++++++++++++++--
>> libavfilter/x86/vf_interlace.asm | 80 ++++++++++++++++++--
>> libavfilter/x86/vf_interlace_init.c | 51 +++++++++----
>> libavfilter/x86/vf_tinterlace_init.c | 51 +++++++++----
>> tests/ref/fate/filter-pixfmts-tinterlace_cvlpf | 11 ++
>> tests/ref/fate/filter-pixfmts-tinterlace_merge | 11 ++
>> tests/ref/fate/filter-pixfmts-tinterlace_pad | 11 ++
>> tests/ref/fate/filter-pixfmts-tinterlace_vlpf | 11 ++
>> 11 files changed, 355 insertions(+), 56 deletions(-)
>> d34a8ac3c7d1213a33f8fb5d144e0c9fd7f694e6
>> 0003-avfilter-interlace-add-support-for-10-and-12-bit.patch
>> From 4f7172f258bcad46c401ac0acbb4ef1666466c18 Mon Sep 17 00:00:00 2001
>> From: Thomas Mundt <tmund...@gmail.com>
>> Date: Tue, 19 Sep 2017 22:23:23 +0200
>> Subject: [PATCH 3/3 v2] avfilter/interlace: add support for 10 and 12 bit
>>
>> Signed-off-by: Thomas Mundt <tmund...@gmail.com>
>> ---
>> libavfilter/interlace.h | 5 +-
>> libavfilter/tinterlace.h | 5 +-
>> libavfilter/vf_interlace.c | 97
>> ++++++++++++++++++++++----
>> libavfilter/vf_tinterlace.c | 78 +++++++++++++++++++--
>> libavfilter/x86/vf_interlace.asm | 80 +++++++++++++++++++--
>> libavfilter/x86/vf_interlace_init.c | 51 ++++++++++----
>> libavfilter/x86/vf_tinterlace_init.c | 51 ++++++++++----
>> tests/ref/fate/filter-pixfmts-tinterlace_cvlpf | 11 +++
>> tests/ref/fate/filter-pixfmts-tinterlace_merge | 11 +++
>> tests/ref/fate/filter-pixfmts-tinterlace_pad | 11 +++
>> tests/ref/fate/filter-pixfmts-tinterlace_vlpf | 11 +++
>> 11 files changed, 355 insertions(+), 56 deletions(-)
>
> Tested on mips qemu and x86-64, works
Applied and pushed then. Thanks.
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
