On Mon, Oct 10, 2016 at 02:56:24PM -0600, Roger Pack wrote: > On 9/22/16, Roger Pack <rogerdpa...@gmail.com> wrote: > > On 1/4/12, Yuval Adam <yuv....@gmail.com> wrote: > >> From: Yuval Adam <yuv....@gmail.com> > >> > >> The image2 muxer now supports timestamps in output filenames. > >> When used in an output patterm '%t' will be replaced with the frames > >> timestamp in hours, minutes and seconds (hh:mm:ss). > > > > A somewhat updated (but not yet cleaned up) revision: > > > > https://gist.github.com/rdp/e518616f2a702367ae5a922b56e09e04 > > > > see also https://trac.ffmpeg.org/ticket/1452 > > OK attached is the "cleaned up" patch, ready for review/commit. > > how to test: > (apply then) run this: > > ./ffmpeg -i input -copyts -vsync vfr temp/abc-%d-%t.jpeg > and compare filenames with the timestamps from video packets of > ffprobe -show_packets. > > Probably a better way would have been to mix it into > av_bprint_strftime however I wasn't sure how to use that within > libavformat/utils.c av_get_frame_filename2 > > Adam's initial patch > (https://github.com/yuvadm/FFmpeg/commit/0eb002821a2076cb3593c823399aeef9fdd29525) > also deprecated av_get_frame_filename > > but I wasn't sure if we wanted that here or not so didn't include it. > Thank you for your consideration. > -roger-
> doc/muxers.texi | 19 ++++++++++++++++---
> libavformat/avformat.h | 3 ++-
> libavformat/hlsenc.c | 6 +++---
> libavformat/img2enc.c | 7 +++++--
> libavformat/utils.c | 36 ++++++++++++++++++++++++++++++++----
> 5 files changed, 58 insertions(+), 13 deletions(-)
> 06950fc8ba5a9163ffb838a2bff9933e69255b41
> 0001-img2-encoder-allow-t-in-filename-based-on-patch-from.patch
> From 11deddfacc595c43a4f542fffe5e90b142e39c85 Mon Sep 17 00:00:00 2001
> From: rogerdpack <rogerpack2...@gmail.com>
> Date: Mon, 10 Oct 2016 14:50:20 -0600
> Subject: [PATCH] img2 encoder: allow %t in filename, based on patch from Yuval
> Adam
>
> Signed-off-by: rogerdpack <rogerpack2...@gmail.com>
> ---
> doc/muxers.texi | 19 ++++++++++++++++---
> libavformat/avformat.h | 3 ++-
> libavformat/hlsenc.c | 6 +++---
> libavformat/img2enc.c | 7 +++++--
> libavformat/utils.c | 36 ++++++++++++++++++++++++++++++++----
> 5 files changed, 58 insertions(+), 13 deletions(-)
>
> diff --git a/doc/muxers.texi b/doc/muxers.texi
> index 9ec2e31..6fff966 100644
> --- a/doc/muxers.texi
> +++ b/doc/muxers.texi
> @@ -619,6 +619,12 @@ If the pattern contains "%d" or "%0@var{N}d", the first
> filename of
> the file list specified will contain the number 1, all the following
> numbers will be sequential.
>
> +If the pattern contains "%t", the frame's timestamps will be inserted
> +in the filename like "00.00.00.000" for hours, minutes, seconds,
> +and milliseconds.
> +
> +The "%t" and "%d" patterns may be used simultaneously.
> +
> The pattern may contain a suffix which is used to automatically
> determine the format of the image files to write.
>
> @@ -635,7 +641,7 @@ The following example shows how to use @command{ffmpeg}
> for creating a
> sequence of files @file{img-001.jpeg}, @file{img-002.jpeg}, ...,
> taking one image every second from the input video:
> @example
> -ffmpeg -i in.avi -vsync 1 -r 1 -f image2 'img-%03d.jpeg'
> +ffmpeg -i in.avi -vsync cfr -r 1 -f image2 'img-%03d.jpeg'
> @end example
>
> Note that with @command{ffmpeg}, if the format is not specified with the
> @@ -643,12 +649,12 @@ Note that with @command{ffmpeg}, if the format is not
> specified with the
> format, the image2 muxer is automatically selected, so the previous
> command can be written as:
> @example
> -ffmpeg -i in.avi -vsync 1 -r 1 'img-%03d.jpeg'
> +ffmpeg -i in.avi -vsync cfr -r 1 'img-%03d.jpeg'
> @end example
>
> Note also that the pattern must not necessarily contain "%d" or
> "%0@var{N}d", for example to create a single image file
> -@file{img.jpeg} from the input video you can employ the command:
> +@file{img.jpeg} from the start of the input video you can employ the command:
> @example
> ffmpeg -i in.avi -f image2 -frames:v 1 img.jpeg
> @end example
> @@ -664,6 +670,13 @@ can be used:
> ffmpeg -f v4l2 -r 1 -i /dev/video0 -f image2 -strftime 1
> "%Y-%m-%d_%H-%M-%S.jpg"
> @end example
>
> +The following example uses the timestamp parameter to generate one
> +image file per video frame from the input, and name it including its original
> +timestamp.
> +@example
> +ffmpeg -i in.avi -vsync vfr -copyts img-%t.jpg
> +@end example
> +
> @subsection Options
>
> @table @option
> diff --git a/libavformat/avformat.h b/libavformat/avformat.h
> index 057f8c5..4eeb6f4 100644
> --- a/libavformat/avformat.h
> +++ b/libavformat/avformat.h
> @@ -2744,10 +2744,11 @@ void av_dump_format(AVFormatContext *ic,
> * @param path numbered sequence string
> * @param number frame number
> * @param flags AV_FRAME_FILENAME_FLAGS_*
> + * @param ts frame timestamp in AV_TIME_BASE fractional seconds.
> * @return 0 if OK, -1 on format error
> */
> int av_get_frame_filename2(char *buf, int buf_size,
> - const char *path, int number, int flags);
> + const char *path, int number, int flags, int64_t
> ts);
>
> int av_get_frame_filename(char *buf, int buf_size,
> const char *path, int number);
> diff --git a/libavformat/hlsenc.c b/libavformat/hlsenc.c
> index 9ca2df7..02d8d44 100644
> --- a/libavformat/hlsenc.c
> +++ b/libavformat/hlsenc.c
> @@ -654,7 +654,7 @@ static int hls_start(AVFormatContext *s)
> } else if (c->max_seg_size > 0) {
> if (av_get_frame_filename2(oc->filename, sizeof(oc->filename),
> c->basename, c->wrap ? c->sequence % c->wrap : c->sequence,
> - AV_FRAME_FILENAME_FLAGS_MULTIPLE) < 0) {
> + AV_FRAME_FILENAME_FLAGS_MULTIPLE, 0) < 0) {
> av_log(oc, AV_LOG_ERROR, "Invalid segment filename template
> '%s', you can try to use -use_localtime 1 with it\n", c->basename);
> return AVERROR(EINVAL);
> }
> @@ -685,14 +685,14 @@ static int hls_start(AVFormatContext *s)
> }
> } else if (av_get_frame_filename2(oc->filename, sizeof(oc->filename),
> c->basename, c->wrap ? c->sequence %
> c->wrap : c->sequence,
> - AV_FRAME_FILENAME_FLAGS_MULTIPLE) < 0) {
> + AV_FRAME_FILENAME_FLAGS_MULTIPLE, 0) < 0) {
> av_log(oc, AV_LOG_ERROR, "Invalid segment filename template '%s'
> you can try to use -use_localtime 1 with it\n", c->basename);
> return AVERROR(EINVAL);
> }
> if( c->vtt_basename) {
> if (av_get_frame_filename2(vtt_oc->filename,
> sizeof(vtt_oc->filename),
> c->vtt_basename, c->wrap ? c->sequence %
> c->wrap : c->sequence,
> - AV_FRAME_FILENAME_FLAGS_MULTIPLE) < 0) {
> + AV_FRAME_FILENAME_FLAGS_MULTIPLE, 0) < 0) {
> av_log(vtt_oc, AV_LOG_ERROR, "Invalid segment filename
> template '%s'\n", c->vtt_basename);
> return AVERROR(EINVAL);
> }
> diff --git a/libavformat/img2enc.c b/libavformat/img2enc.c
> index 1297b1a..e5db290 100644
> --- a/libavformat/img2enc.c
> +++ b/libavformat/img2enc.c
> @@ -80,10 +80,13 @@ static int write_packet(AVFormatContext *s, AVPacket *pkt)
> VideoMuxData *img = s->priv_data;
> AVIOContext *pb[4];
> char filename[1024];
> - AVCodecParameters *par = s->streams[pkt->stream_index]->codecpar;
> + AVStream *stream = s->streams[ pkt->stream_index ];
> + AVCodecParameters *par = stream->codecpar;
> + AVCodecContext *codec = stream->codec;
unused
> const AVPixFmtDescriptor *desc = av_pix_fmt_desc_get(par->format);
> int i;
> int nb_renames = 0;
> + int64_t ts = av_rescale_q(pkt->pts, stream->time_base, AV_TIME_BASE_Q);
>
> if (!img->is_pipe) {
> if (img->update) {
> @@ -99,7 +102,7 @@ static int write_packet(AVFormatContext *s, AVPacket *pkt)
> }
> } else if (av_get_frame_filename2(filename, sizeof(filename),
> img->path,
> img->img_number,
> - AV_FRAME_FILENAME_FLAGS_MULTIPLE)
> < 0 &&
> + AV_FRAME_FILENAME_FLAGS_MULTIPLE,
> ts) < 0 &&
> img->img_number > 1) {
> av_log(s, AV_LOG_ERROR,
> "Could not get frame filename number %d from pattern '%s'
> (either set updatefirst or use a pattern like %%03d within the filename
> pattern)\n",
> diff --git a/libavformat/utils.c b/libavformat/utils.c
> index 8a51aea..a8b0e8c 100644
> --- a/libavformat/utils.c
> +++ b/libavformat/utils.c
> @@ -4377,15 +4377,17 @@ uint64_t ff_ntp_time(void)
> return (av_gettime() / 1000) * 1000 + NTP_OFFSET_US;
> }
>
> -int av_get_frame_filename2(char *buf, int buf_size, const char *path, int
> number, int flags)
> +int av_get_frame_filename2(char *buf, int buf_size, const char *path, int
> number, int flags, int64_t ts)
> {
> const char *p;
> char *q, buf1[20], c;
> - int nd, len, percentd_found;
> + int nd, len, percentd_found, percentt_found;
> + int hours, mins, secs, ms;
>
> q = buf;
> p = path;
> percentd_found = 0;
> + percentt_found = 0;
> for (;;) {
> c = *p++;
> if (c == '\0')
> @@ -4414,6 +4416,32 @@ int av_get_frame_filename2(char *buf, int buf_size,
> const char *path, int number
> memcpy(q, buf1, len);
> q += len;
> break;
> + case 't':
> + if (!(flags & AV_FRAME_FILENAME_FLAGS_MULTIPLE) &&
> percentt_found) {
> + av_log(NULL, AV_LOG_ERROR, "double %%t not allowed");
> + goto fail;
> + }
> + if (ts == 0) {
> + av_log(NULL, AV_LOG_DEBUG, "%%t but no ts, using 0"); //
> necessary for first frame on some streams
> + }
> + percentt_found = 1;
> + ms = ts % AV_TIME_BASE;
> + ts /= AV_TIME_BASE;
> + secs = ts % 60;
> + ts /= 60;
> + mins = ts % 60;
> + ts /= 60;
> + hours = ts;
does this support negative ts ?
i think nothig stops negative ts from reaching this
[...]
--
Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB
Dictatorship naturally arises out of democracy, and the most aggravated
form of tyranny and slavery out of the most extreme liberty. -- Plato
signature.asc
Description: Digital signature
_______________________________________________ ffmpeg-devel mailing list ffmpeg-devel@ffmpeg.org http://ffmpeg.org/mailman/listinfo/ffmpeg-devel
