On Tue, Jul 9, 2024 at 7:45 PM Leo Izen <leo.i...@gmail.com> wrote:
>
> This test confirms that we can write mDCv chunks and read them back via
> the png decoder. It uses an HEVC conformance sample with this metadata
> as the base source for the side data in the frames.
>
> Signed-off-by: Leo Izen <leo.i...@gmail.com>
> Reported-by: Jan Ekström <jee...@gmail.com>
> Reviewed-by: Andreas Rheinhardt <andreas.rheinha...@outlook.com>
> ---
> tests/fate/image.mak | 6 ++++++
> tests/ref/fate/png-mdcv | 22 ++++++++++++++++++++++
> 2 files changed, 28 insertions(+)
> create mode 100644 tests/ref/fate/png-mdcv
>
> diff --git a/tests/fate/image.mak b/tests/fate/image.mak
> index 753936ec20..358ab4b765 100644
> --- a/tests/fate/image.mak
> +++ b/tests/fate/image.mak
> @@ -416,6 +416,12 @@ FATE_PNG_PROBE-$(call ALLYES, LCMS2) +=
> fate-png-icc-parse
> fate-png-icc-parse: CMD = run ffprobe$(PROGSSUF)$(EXESUF) -show_frames \
> -flags2 icc_profiles $(TARGET_SAMPLES)/png1/lena-int_rgb24.png
>
> +FATE_PNG_TRANSCODE-$(call TRANSCODE, PNG HEVC, IMAGE2 HEVC, \
> + IMAGE_PNG_PIPE_DEMUXER HEVC_PARSER PNG_DECODER SCALE_FILTER) +=
> fate-png-mdcv
> +fate-png-mdcv: CMD = transcode hevc
> $(TARGET_SAMPLES)/hevc/hdr10_plus_h265_sample.hevc image2 \
You are currently getting warnings from image2 since you are not
utilizing a pattern as it expects. For a single image output, using
image2pipe would probably be more correct.
[image2 @ 0x32c5580] The specified filename
'/home/jeeb/projects/ffmpeg/lu
nix_build/tests/data/fate/png-mdcv.image2'
does not contain an image sequence pattern or a pattern is invalid.
[image2 @ 0x32c5580] Use a pattern such as %03d for an image sequence
or use the -update option (with -frames:v 1 if needed) to write a
single image.
The following switch would have the test not output those messages:
diff --git a/tests/fate/image.mak b/tests/fate/image.mak
index 358ab4b765..042cf6438f 100644
--- a/tests/fate/image.mak
+++ b/tests/fate/image.mak
@@ -416,9 +416,9 @@ FATE_PNG_PROBE-$(call ALLYES, LCMS2) += fate-png-icc-parse
fate-png-icc-parse: CMD = run ffprobe$(PROGSSUF)$(EXESUF) -show_frames \
-flags2 icc_profiles $(TARGET_SAMPLES)/png1/lena-int_rgb24.png
-FATE_PNG_TRANSCODE-$(call TRANSCODE, PNG HEVC, IMAGE2 HEVC, \
+FATE_PNG_TRANSCODE-$(call TRANSCODE, PNG HEVC, IMAGE2PIPE HEVC, \
IMAGE_PNG_PIPE_DEMUXER HEVC_PARSER PNG_DECODER SCALE_FILTER) +=
fate-png-mdcv
-fate-png-mdcv: CMD = transcode hevc
$(TARGET_SAMPLES)/hevc/hdr10_plus_h265_sample.hevc image2 \
+fate-png-mdcv: CMD = transcode hevc
$(TARGET_SAMPLES)/hevc/hdr10_plus_h265_sample.hevc image2pipe \
"-pix_fmt rgb24 -vf scale -c png" "" \
"-show_frames -show_entries frame=side_data_list -of flat"
Otherwise verified that the following minimal configuration does seem
to indeed work (both deps from TRANSCODE as well as the test itself):
../configure --disable-everything --disable-autodetect --enable-zlib
--enable-ffmpeg --enable-protocol="file,pipe"
--enable-demuxer="hevc,image_png_pipe" --enable-decoder="hevc,png"
--enable-encoder="rawvideo,pcm_s16le,png"
--enable-muxer="framecrc,image2pipe" --enable-parser="hevc"
--enable-filter="scale"
(with image2 in muxers originally, and then image2pipe with the diff applied)
Interesting that the PNG parser is not required for reading the
output, but it seems to work so the dependencies seem fine.
Finally, I think the commit message could mention both CLL and MDCV :) .
Otherwise LGTM, and I think with the slight adjustments
(image2->image2pipe and updated commit message), the patch can be
applied.
Jan
On Tue, Jul 9, 2024 at 7:45 PM Leo Izen <leo.i...@gmail.com> wrote:
>
> This test confirms that we can write mDCv chunks and read them back via
> the png decoder. It uses an HEVC conformance sample with this metadata
> as the base source for the side data in the frames.
>
> Signed-off-by: Leo Izen <leo.i...@gmail.com>
> Reported-by: Jan Ekström <jee...@gmail.com>
> Reviewed-by: Andreas Rheinhardt <andreas.rheinha...@outlook.com>
> ---
> tests/fate/image.mak | 6 ++++++
> tests/ref/fate/png-mdcv | 22 ++++++++++++++++++++++
> 2 files changed, 28 insertions(+)
> create mode 100644 tests/ref/fate/png-mdcv
>
> diff --git a/tests/fate/image.mak b/tests/fate/image.mak
> index 753936ec20..358ab4b765 100644
> --- a/tests/fate/image.mak
> +++ b/tests/fate/image.mak
> @@ -416,6 +416,12 @@ FATE_PNG_PROBE-$(call ALLYES, LCMS2) +=
> fate-png-icc-parse
> fate-png-icc-parse: CMD = run ffprobe$(PROGSSUF)$(EXESUF) -show_frames \
> -flags2 icc_profiles $(TARGET_SAMPLES)/png1/lena-int_rgb24.png
>
> +FATE_PNG_TRANSCODE-$(call TRANSCODE, PNG HEVC, IMAGE2 HEVC, \
> + IMAGE_PNG_PIPE_DEMUXER HEVC_PARSER PNG_DECODER SCALE_FILTER) +=
> fate-png-mdcv
> +fate-png-mdcv: CMD = transcode hevc
> $(TARGET_SAMPLES)/hevc/hdr10_plus_h265_sample.hevc image2 \
> + "-pix_fmt rgb24 -vf scale -c png" "" \
> + "-show_frames -show_entries frame=side_data_list -of flat"
> +
> FATE_PNG-$(call DEMDEC, IMAGE2, PNG) += $(FATE_PNG)
> FATE_PNG_PROBE-$(call DEMDEC, IMAGE2, PNG) += $(FATE_PNG_PROBE)
> FATE_IMAGE_FRAMECRC += $(FATE_PNG-yes)
> diff --git a/tests/ref/fate/png-mdcv b/tests/ref/fate/png-mdcv
> new file mode 100644
> index 0000000000..b719152557
> --- /dev/null
> +++ b/tests/ref/fate/png-mdcv
> @@ -0,0 +1,22 @@
> +fc68fe6c8c72343b96d2695f6913995b *tests/data/fate/png-mdcv.image2
> +439248 tests/data/fate/png-mdcv.image2
> +#tb 0: 1/25
> +#media_type 0: video
> +#codec_id 0: rawvideo
> +#dimensions 0: 1280x720
> +#sar 0: 0/1
> +0, 0, 0, 1, 2764800, 0x2bfc7b42
> +frames.frame.0.side_data_list.side_data.0.side_data_type="Content light
> level metadata"
> +frames.frame.0.side_data_list.side_data.0.max_content=1000
> +frames.frame.0.side_data_list.side_data.0.max_average=200
> +frames.frame.0.side_data_list.side_data.1.side_data_type="Mastering display
> metadata"
> +frames.frame.0.side_data_list.side_data.1.red_x="13250/50000"
> +frames.frame.0.side_data_list.side_data.1.red_y="7500/50000"
> +frames.frame.0.side_data_list.side_data.1.green_x="34000/50000"
> +frames.frame.0.side_data_list.side_data.1.green_y="16000/50000"
> +frames.frame.0.side_data_list.side_data.1.blue_x="2/50000"
> +frames.frame.0.side_data_list.side_data.1.blue_y="0/50000"
> +frames.frame.0.side_data_list.side_data.1.white_point_x="15635/50000"
> +frames.frame.0.side_data_list.side_data.1.white_point_y="16450/50000"
> +frames.frame.0.side_data_list.side_data.1.min_luminance="50/10000"
> +frames.frame.0.side_data_list.side_data.1.max_luminance="10000000/10000"
> --
> 2.45.2
>
_______________________________________________
ffmpeg-devel mailing list
ffmpeg-devel@ffmpeg.org
https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
To unsubscribe, visit link above, or email
ffmpeg-devel-requ...@ffmpeg.org with subject "unsubscribe".
